GOST R 70628.2-2023
ГОСТ Р 70628.2-2023
|
|
Plastic pipelines for water supply, drainage and pressure sewerage. Polyethylene (PE). Part 2. Pipes
Трубопроводы из пластмасс для водоснабжения, дренажа и напорной канализации. Полиэтилен (ПЭ). Часть 2. Трубы
Status: Status information is available in the commercial version of NormaCS 01.12.2023
Choose Language:
Format: Electronic (pdf/doc)
Approved: Rosstandart,
1/26/2023
SKU: RUSS436282
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Construction (Max) »
Standards »
Other state standards used in construction »
83 Rubber, technical rubber, asbestos and plastic industries »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.10 Testing and monitoring products of rubber and plastics industry »
4.10.2 Plastic Products »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.45 Plastic fittings »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.45 Plastic fittings »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.30 Plastic pipes, fittings not for liquids »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.30 Plastic pipes, fittings not for liquids »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L26 Plastic products »
The Document References:
Federal Law 162-FZ: About standardization in the Russian Federation
GOST 1.5-2001: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. General requirements for structure, drafting, presentation, content and indication
GOST 11645-2021: Plastics. Methods for determination of the melt flowability index of thermoplastics
GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing
GOST 12423-2013: Plastics. Standard atmospheres for conditioning and testing specimens
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 22235-2010: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations
GOST 26653-2015: Preparation of general cargoes for transportation. General requirements
GOST 27078-2014: Tubes made of thermoplastics. Length measurement. Method for determination and parameters
GOST 9.708-83: Unified system of corrosion and ageing protection. Plastics. Ageing test methods on exposure to natural and artificial climatic factors
GOST ISO 1167-1-2013: Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Part 1. General method
GOST ISO 1167-2-2013: Thermoplastics pipes, fittings and assemblies for the conveyance of fluids. Determination of the resistance to internal pressure. Part 2. Preparation of pipe test pieces
GOST ISO 11922-1-2019: Thermoplastics pipes for transporting liquid and gaseous media. Dimensions and tolerances. Part 1. Metric Series
GOST ISO 4065-2019: Thermoplastics pipes. Universal wall thickness table
GOST R 53652.1-2009: Thermoplastics pipes. Method for determination of tensile properties. Part 3. General requirement
GOST R 53652.3-2009: Thermoplastics pipes. Method for determination of tensile properties. Part 3. Polyolefin pipes
GOST R 54475-2011: Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
GOST R 56756-2015: Plastics. Differential scanning calorimetry (DSC). Part 6. Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
GOST R 58121.1-2018: Plastic pipings for the supply of gaseous fuels. Polyethylene (PE). Part 1. General
GOST R 58121.2-2018: Plastic pipings for the supply of gaseous fuels. Polyethylene (PE). Part 2. Pipes
GOST R 70628.1-2023: Plastic pipelines for water supply, drainage and pressure sewerage. Polyethylene (PE). Part 1. General requirements
GOST R 70628.5-2023: Plastic pipelines for water supply, drainage and pressure sewerage. Polyethylene (PE). Part 5. Conformity with the intended use of the system
GOST R ISO 16871-2022: Pipelines and sewage systems made of plastics. Plastics pipes and fittings. Method for determination of weather resistance under direct (atmospheric) exposure to weather conditions
GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions
OK 001-2021: (ISO ISS) All-Russian Classification of Standards
SP 399.1325800.2018: External water supply and sewage systems made of polymer materials. Rules for design and installation
The Document is Referenced By:
GOST R 70628.1-2023: Plastic pipelines for water supply, drainage and pressure sewerage. Polyethylene (PE). Part 1. General requirements
GOST R 70628.3-2023: Plastic pipelines for water supply, drainage and pressure sewerage. Polyethylene (PE). Part 3. Fittings
GOST R 70628.5-2023: Plastic pipelines for water supply, drainage and pressure sewerage. Polyethylene (PE). Part 5. Conformity with the intended use of the system
GOST R 70751-2023: Heat-resistant polymeric pipes for laying power cables with a voltage of 1 to 500 kV. General specifications
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
