GOST R 70707-2023
ГОСТ Р 70707-2023
|
|
Compact units for treatment of domestic wastewater. General technical conditions
Установки компактные для очистки бытовых сточных вод. Общие технические условия
Status: Status information is available in the commercial version of NormaCS 01.06.2023
Choose Language:
Format: Electronic (pdf/doc)
Approved: Rosstandart,
4/4/2023
SKU: RUSS436676
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulatory documents »
Security »
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
2 Protection and protection of surface water bodies »
2.2 Rationing impact on water bodies »
2.2.1 Rationing of quality of water bodies »
2.2.1.3 Requirements for quality of water bodies of industrial water use »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.060 Water quality »
13.060.30 Wastewater »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.060 Water quality »
13.060.30 Wastewater »
The Document References:
Decision 299: Uniform sanitary and epidemiological and hygienic requirements for products (goods) subject to sanitary and epidemiological supervision (control)
Decree 1430: Technological indicators of the best available technologies in the field of wastewater treatment using centralized wastewater disposal systems of settlements or urban districts
Decree 1430: On Amendments to Certain Acts of the Government of the Russian Federation in Connection with the Creation of the Public Law Company "Roskadastr"
Federal Law 162-FZ: About standardization in the Russian Federation
Federal Law 412-FZ: On accreditation in the national accreditation system
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 12.0.004-2015: Occupational safety standards system. Organization of training for labor safety. General principles
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.032-78: Operators location in a silting position. General ergonomic requirements
GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements
GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements
GOST 12.3.002-2014: System of labor safety standards Production processes. General safety requirements.
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.280-2014: Occupational safety standards system. Special clothing for mechanical action protection and general industrial contamination protection. General technical requirements
GOST 14192-96: Cargo marking
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 166-89: Vernier callipers. Specifications
GOST 17.1.3.13-86: Hydrosphere. General requirements for surface water protection against pollution
GOST 22648-77: Plastics. Methods for determination of hygienic characteristics
GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 26996-86: Polypropylene and copolymers of propylene. Specifications
GOST 3242-79: Welded joints
GOST 34757-2021: Package. Marking indicating the way the goods are handled
GOST 6357-81: Basic norms of interchangeability pipe cylindrical thread
GOST 6507-90: Micrometers. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8908-81: Basic norms of interchangeability. Standard angles and angle tolerances
GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile
GOST R 50460-92: Mark of conformity for obligatory certification form, dimensions dnd technical requirements
GOST R 58577-2019: Rules for establishing standards for permissible emissions of pollutants by designed and existing business entities and methods for determining these standards
GOST R 58941-2020: A system for ensuring the accuracy of geometric parameters in construction. Measurement rules. General Provisions
GOST R 58943-2020: A system for ensuring the accuracy of geometric parameters in construction. Accuracy control
GOST R 59053-2020: Environmental protection. Protection and rational use of waters. Terms and Definitions
GOST R 59061-2020: Environmental protection. Air pollution. Terms and Definitions
GOST R 59123-2020: Occupational safety standards system (SSBT). Personal protective equipment. General requirements and classification
GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions
OK 001-2021: (ISO ISS) All-Russian Classification of Standards
SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste
SP 20.13330.2016: Loads and actions
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.