GOST R 56188.3.200-2023
ГОСТ Р 56188.3.200-2023
|
|
Fuel Cell Technologies. Part 3-200. Stationary fuel cell power plants. Test methods for determining operating characteristics
Технологии топливных элементов. Часть 3-200. Стационарные энергоустановки на основе топливных элементов. Методы испытаний для определения рабочих характеристик
Status: Status information available in commercial version of NormaCS 31.05.2023
Choose Language:
Format: Electronic (pdf/doc)
Approved: Rosstandart,
3/30/2023
SKU: RUSS436749
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
27 Power and heat engineering »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
1 Basic provisions of product testing and control system »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.070 Hydrogen fuel cells »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.075 Hydrogen Technologies »
National standards »
27 ENERGY AND HEATING TECHNOLOGY »
27.075 Hydrogen Technologies »
As a Replacement Of:
GOST R IEC 62282-3-200-2014: Fuel cell technologies. Part 3-200. Stationary fuel cell power systems. Performance test method
The Document References:
Federal Law 162-FZ: About standardization in the Russian Federation
GOST 22387.2-2021: Natural gas. Methods for determination of hydrogen sulfide and mercaptan sulfur
GOST 30804.4.7-2013: Electromagnetic compatibility of technical equipment. General guide on harmonics and interharmonics measuring instruments and measurement, for power supply systems and equipment connected thereto
GOST 31369-2008: Natural gas. Calculation of calorific values, density, relative density and Wobbe index from composition
GOST 31371.1-2020: GOST 31371.1-2020 (ISO 6974-1: 2012) Natural gas. Determination of composition by gas chromatography with uncertainty estimation. Part 1. General instructions and definition of composition
GOST 31371.2-2020: Natural gas. Determination of composition by gas chromatography with uncertainty estimation. Part 2. Calculation of uncertainty
GOST 31371.3-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 3. Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns
GOST 31371.4-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 4. Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns
GOST 31371.5-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 5. Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns
GOST 31371.5-2022: Natural gas. Composition determination by gas chromatography with uncertainty evaluation. Part 5. Determination of nitrogen, carbon dioxide, and C1 to C5 and C6+ hydrocarbons by isothermal method
GOST 31371.6-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 6. Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
GOST 34100.3-2017: Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement
GOST 8.586.1-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the method of measurements and general requirements
GOST 8.586.2-2005: State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 2. Orifice plates. Technical requirements
GOST 8.586.3-2005: State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 3. Nozzles and Venturi nozzles. Technical requirements
GOST 8.586.4-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 4. Venturi tubes. Technical requirements
GOST 8.586.5-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
GOST IEC 61000-4-13-2016: Electromagnetic compatibility (EMC). Part 4-13. Methods of tests and measurements. Effects of harmonics and inter-harmonics, including signals transmitted via electrical networks, to the AC power port. Low frequency noise immunity tests
GOST IEC 62282-3-201-2015: Fuel Cell Technologies. Part 3-201. Stationary power installations, installations on fuel cells. Test methods for determining the performance of low-power systems
GOST ISO 5348-2002: Vibration and shock. Mechanical mounting of accelerometers
GOST R 1.5-2012: Standardization in Russian Federation. National Standards. Rules of structure, drafting, presentation and indication
GOST R 53188.1-2019: State system for ensuring uniformity of measurements. Sound level meters. Part 1. Technical requirements
GOST R 53188.2-2019: State system for ensuring uniformity of measurements. Sound level meters. Part 2. Test methods
GOST R 54299-2010: Marine fuels. Specifications
GOST R 56916-2016: Natural combustible gas. Determination of water vapours content by Karl Fisher method
GOST R IEC 62282-3-200-2014: Fuel cell technologies. Part 3-200. Stationary fuel cell power systems. Performance test method
GOST R ISO 10396-2012: Stationary source emissions. Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems
GOST R ISO 10849-2006: Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Performance characteristics of automated measuring systems
GOST R ISO 11042-1-2001: Gas turbines. Methods of exhaust gas emission determinations
GOST R ISO 14687-1-2012: Hydrogen fuel. Product specification. Part 1. All applications except proton exchange membrane (PEM) fuel cell for road vehicles
GOST R ISO 16622-2009: Meteorology. Sonic anemometers/thermometers. Acceptance test methods for mean wind measurements
GOST R ISO 3744-2013: Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free field over a reflecting plane
GOST R ISO 7935-2007: Stationary source emissions. Determination of the mass concentration of sulphur dioxide. Performance characteristics of automated measuring methods
OK 001-2021: (ISO ISS) All-Russian Classification of Standards
|
Customers Who Viewed This Item Also Viewed:
 |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
Vegetable oils. General technical requirements
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
