GOST R 70726-2023
ГОСТ Р 70726-2023
|
|
Modular swimming pools. General technical conditions
Модульные бассейны для плавания. Общие технические условия
Status: Status information is available in the commercial version of NormaCS 01.09.2023
Choose Language:
Format: Electronic (pdf/doc)
Approved: Rosstandart,
4/17/2023
SKU: RUSS436756
The Product is Contained in the Following Classifiers:
ISO classifier »
97 HOUSEHOLD APPLIANCES AND TRADE EQUIPMENT. RECREATION. SPORT »
97.220 Sports equipment and facilities »
97.220.40 Equipment for outdoor sports and water sports »
National standards »
97 HOUSEHOLD APPLIANCES AND TRADE EQUIPMENT. RECREATION. SPORT »
97.220 Sports equipment and facilities »
97.220.40 Equipment for outdoor sports and water sports »
The Document References:
Federal Law 162-FZ: About standardization in the Russian Federation
Federal Law 184-FZ: About technical regulation
GOST 112-78: Meteorological glass thermometers
GOST 12.1.003-2014: Occupational safety standards system. Noise. General safety requirements
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding
GOST 12302-2013: Packs made of polymeric films and composite materials. General specifications
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 14192-96: Cargo marking
GOST 14254-2015: Degrees of protection provided by enclosures (IP Code)
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 24297-2013: Verification of purchased product. Organization and methods of control
GOST 25298-82: Compact treatment plants for domestic sewage water. Types, basic parameters and dimensions
GOST 25347-2013: Basic norms of interchangeability. Geometrical product specifications. System for tolerances on linear sizes. Series of tolerances, limit deviations for holes and shafts
GOST 25348-82: Basic norms of interchangeability. Unified system of tolerances and fits. Series of tolerances, basic deviations and tolerance zones for sizes over 3150 mm
GOST 26653-2015: Preparation of general cargoes for transportation. General requirements
GOST 26828-86: Instrumentation and machine building products. Marking
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 30674-99: Windows of polyvinylchloride profiles. Specifications
GOST 30778-2001: Rubber compression-types for windows and doors. Specifications
GOST 30970-2014: Door blocks of polyvinylchloride profiles. Specifications
GOST 30971-2012: Erection to joints of window assemblies adjoined to wall openings. General specifications
GOST 3242-79: Welded joints
GOST 32603-2021: Three-layer panels with metal cladding and mineral wool core. Technical conditions
GOST 380-2005: Common quality carbon steel. Grades
GOST 5089-2011: Locks, latches, mechanisms cylinders. General specifications
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 6376-74: Hand anemometer accounting device. Specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7566-2018: Metal product. Rules of acceptance, marking, packing, transportation and storage
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.407-2015: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating
GOST 9573-2012: Thermal insulating plates of mineral wool on synthetic binder. Specifications
GOST ISO 3269-2021: Fasteners and fasteners. Acceptance test
GOST R 2.601-2019: Unified system of design documentation. Operational documents
GOST R 2.610-2019: Unified system of design documentation. Rules for the implementation of operational documents
GOST R 50571.7.702-2013: Low-voltage electrical installation. Part 7. Requirements for special installations or locations. Section 702. Swimming pools and fountains
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 53491.1-2009: Pools. Treatment of water. Part 1. General requirements
GOST R 53491.2-2012: Pools. Treatment of water. Part 2. Safety requirements
GOST R 55529-2013: Sports facilities. Safety requirements for carrying out sports and physical cultural activities. Test methods
GOST R 58458-2020: Swimming pools. General specifications
GOST R 70015-2022: Swimming pools. Baths of metal. Technical conditions
OK 001-2021: (ISO ISS) All-Russian Classification of Standards
PUE: Electrical Installation Rules (PUE). Chapter 1.1 General (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.2 Electricity supply and electrical networks (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.7 Grounding and Electrical Safety Precautions (Seven Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.9 Insulation of electrical installations (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.6 Electric Welding Machines (Seven Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.10. Electrolysis Plants and Plating Plants (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance Test Standards (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.1. General part (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.2. Electricity supply and electrical networks (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.3. Selection of conductors by heating, economic current density and by corona conditions (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.4. Selection of electrical devices and conductors for short circuit conditions (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.5. Electricity metering (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.6. Electrical Measurements (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.7. Grounding and Electrical Safety Precautions (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.1. Electrical Wiring (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.2. Busducts up to 35 kV (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.3. Cable lines with voltage up to 220 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Beginning) (with Amendments and additions) (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.1. Protection of electrical networks with voltage up to 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.2. Relay Protection (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.3. Automation and telemechanics (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.4. Secondary Circuits (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.3. Converter substations and installations (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.4. Battery Units (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.1. Electrical machine rooms (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.2. Generators and Synchronous Compensators (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.3. Electric motors and their switching devices (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.4. Crane Electrical Equipment (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.5. Elevator Electrical Equipment (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.6. Condensing Units (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical equipment of residential, public, administrative and domestic buildings (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor lighting (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical installations of entertainment enterprises, clubs and sports facilities (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.3. Electrical Installations in Hazardous Areas (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.4. Electrical Installations in Fire Hazardous Zones (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.5. Electrothermal Plants (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.6. Electric welding machines (sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.7. Peat electrical installations (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltages above 1 kV (End) (Sixth edition)
PUE: Electrical Installation Rules (PUE). Applications
PUE: Electrical Installation Rules (PUE). Chapter 6.6. Lighting devices and wiring devices (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor Lighting (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical Equipment for Residential and Public Buildings (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical equipment for entertainment enterprises, clubs and sports facilities (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Seventh edition) (with Amendment)
PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance test standards (Seventh edition)
Resolution 44: SP 2.1.3678-20 Sanitary and Epidemiological Requirements for the Operation of Premises, Buildings, Structures, Equipment and Transport, as well as the Operating Conditions of Economic Entities Selling Goods, Performing Works or Rendering Services
Resolution 44: Rules for the Development of Thermal Power Water Deposits
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 31-06-2009: Public buildings and constructions
SNiP 35-01-2001: Buildings accessibility for disabled population
SNiP 41-01-2003: Heating, Ventilation and Air Conditioning (HVAC)
SP 1.13130.2020: Fire protection systems. Evacuation routes and exits
SP 1.13130.2020: Fire protection systems. Evacuation routes and exits
SP 118.13330.2022: Public buildings and facilities
SP 131.13330.2020: Construction climatology SNiP 23-01-99 *
SP 17.13330.2017: The roofs
SP 22.13330.2016: Soil bases of buildings and structures
SP 3.13130.2009: Systems of fire protection. System of annunciation and management of human evacuation at fire. Requirements of fire safety
SP 310.1325800.2017: Swimming pools. Design rules
SP 332.1325800.2017: Sport constructions. Rules of design
SP 44.13330.2011: Administrative and residential buildings
SP 484.1311500.2020: Fire protection systems. Fire alarm systems and automation of fire protection systems. Norms and rules of design
SP 485.1311500.2020: Fire protection systems. Automatic fire extinguishing installations. Norms and rules of design
SP 486.1311500.2020: Fire protection systems. The list of buildings, structures, premises and equipment to be protected by automatic fire extinguishing installations and fire alarm systems. Fire safety requirements
SP 501.1325800.2021: Buildings from large-sized modules. Design and construction rules. Basic Provisions
SP 50-101-2004: Design and construction of soil bases and foundations for buildings and structures
SP 59.13330.2020: Accessibility of buildings and structures for people with limited mobility SNiP 35-01-2001
SP 60.13330.2020: Heating, ventilation and air conditioning SNiP 41-01-2003
SP 7.13130.2013: Heating, ventilation and air conditioning. Fire Safety Requirements
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
|
Customers Who Viewed This Item Also Viewed:
 |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.