Regulatory acts on technical policy issues
О нормативных актах по вопросам технической политики
Status: Effective
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Transport of Russia,
11/23/1992
SKU: RUSS437369
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.2 Ships and ship equipment »
ISO classifier »
03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT »
03.220 Transport »
03.220.40 Water transport »
ISO classifier »
47 SHIPBUILDING AND MARINE STRUCTURES »
47.020 Shipbuilding and marine structures in general »
The Document References:
Letter 133: About enactment of the Process Design Standards for SRW
RD 31.00.14.01-88: Navy vessels of unlimited navigation areas. Inventory and Tool Supplies
RD 31.00.14.05-88: Naval nuclear-powered and nuclear service ships. Norms of special supply
RD 31.00.46-86: Spare Propeller Shaft Standards for Operated MMF Ships
RD 31.00.67-83: Sheets of the order of products. Rules for development, coordination and changes
RD 31.00.73-83: Repair of rowing electric cars of direct current of electric ships. Organizational and technical activities
RD 31.00.79-84: Sheets of norms of consumption of materials. Rules for drafting, coordination and changes
RD 31.00.83-84: The procedure for applying (borrowing) design documentation in the MMF system
RD 31.00.87-85: Specifications. Rules of construction, presentation and design. The procedure for approval, approval and registration
RD 31.00.88-85: Recommendations for organizations and enterprises of the MMF on reducing the volume, simplifying the design and coordination of design documentation
RD 31.00.89-86: A station for the preparation of drinking water from a marine outboard. Design rules and regulations
RD 31.00.91-85: MMF Spare Propeller Standards
RD 31.00.97-87: Typical nomenclature of operational and repair documents for marine vessels (temporary)
RD 31.03.03-90: Use of synthetic ropes on ships of the Ministry of the Navy
RD 31.03.34-86: Requirements for a unified ship propulsion system for diesel propulsion systems
RD 31.03.35-87: Technical and operational requirements for ventilation systems of closed cargo spaces of sea railway ferries for the transport of dangerous goods
RD 31.03.41-90: Technical and operational requirements for the optimal configuration of power plants of marine transport hubs
RD 31.04.27-88: Fuel tanks of transport ships. Technical requirements for the location and design to ensure washing mechanization
RD 31.20.40-86: Addition to the provision on technical operation of the navy. Nuclear ships and ATO ships
RD 31.20.50-87: Comprehensive system of maintenance and repair of vessels. Basic Guide.
RD 31.20.74-81: Instructions for organizing cleaning afloat underwater hulls
RD 31.20.79-81: Instructions on the organization and technology of underwater survey of vessels
RD 31.21.02-89: Model program of periodic surveys of wastewater treatment plants
RD 31.21.12-83: Typical instruction for the organization of ship operation in economical operating modes
RD 31.21.29-85: Test procedure for marine diesel power plants under operating conditions
RD 31.21.32-84: Methods of choosing the operational modes of operation of the main marine diesel engines taking into account the characteristics of the propeller and sailing conditions
RD 31.21.43-85: Recommendations on the choice of operating modes of power plants of diesel-electric icebreakers depending on ice conditions
RD 31.21.66-85: Rules for the operation of ship cranes at high wind loads
RD 31.21.71-79: Marine ventilation and air conditioning systems. Rules and setup methods
RD 31.21.81-79: Instructions for power supply of ships from land-based networks.
RD 31.21.83-81: Instruction for Engineers on Engine Watch and Port Watch
RD 31.21.84-82: Typical repair determination for preparing of fuel and oil tanks of the Navy vessels.
RD 31.21.92-87: Multi-turn load securing facilities applied for sea crafts. Maintenance regulations.
RD 31.21.95-87: Multi-turn load securing facilities applied for sea crafts. Engineering certification manual.
RD 31.21.96-87: Multi-turn means for securing cargo on ships. Catalog
RD 31.22.02-83: Guidelines for the collection, processing and use of operational information on the reliability of shipboard technical equipment and structures in shipping companies
RD 31.25.01-83: Rafts for outboard work. Design and Operations Requirements
RD 31.25.02-86: Album of recommended for use means of mechanization of ship works. Types and main characteristics
RD 31.27.21-87: Unified technical norms for fuel consumption and oil for serial transport of Ming fleet vessels.
RD 31.27.25-86: Unified technical standards for reference fuel and lubricant consumption for vessels of the Minmorflot dredging fleet
RD 31.27.35-87: Rationing methodology and individual rates of lubricant consumption for the work of ships of the sea transport fleet
RD 31.27.43-81: Instructions for determining the content of oil and petroleum products in marine waters for various purposes using infrared spectrophotometry
RD 31.27.46-82: Instructions for use in marine diesel engines of motor oils of groups G2TSS and DTsL
RD 31.27.48-83: Technical and operational requirements for systems for the disposal of oil residues on ships
RD 31.28.04-88: Process instruction for preventive and pre-repair chemical and mechanical cleaning, washing and degassing of fuel tanks of ships
RD 31.28.30-88: Integrated system for maintenance and repair of ships. Methodology for the detection of hulls of marine transport vessels
RD 31.28.52-79: Methods of physico-chemical control of the working environments of ship equipment
RD 31.28.54-80: Instructions for the continuous cleaning of marine diesels with Chistra-2
RD 31.50.04-82: Unified nomenclature of ship kits and units
RD 31.50.25-87: Album of non-standard equipment recommended for use at MMF shipyards
RD 31.50.26-90: Technological documentation for ship repair enterprises. Directions for use
RD 31.52.03-90: Catalog of welding equipment recommended for use at enterprises and vessels of the Minmorflot
RD 31.52.04-90: Polymer adhesive compositions. Application in ship repair. Technological requirements
RD 31.52.08-81: Caprolon steering gear bearings. Technological requirements for the manufacture and installation of ship repair
RD 31.52.10-82: Temporary ventilation systems for ship premises during repair. Rules for design and operation
RD 31.52.12-88: Ship propeller shafts. Recovery by electric arc surfacing with pearlitic and austenitic steels
RD 31.52.16-85: Technical measurements based on laser sight in the manufacture, installation and repair of ship devices and structures. Key Points
RD 31.52.17-86: Recommendations for artificial heating when painting ships in docks
RD 31.52.19-88: Rules for raising and lowering ships with natural trim floating docks
RD 31.52.21-88: Recommendations on selection of welding materials in enterprises of Ministry of Marine.
RD 31.52.22-88: Rules for technical operation of ship-raising structures
RD 31.52.23-89: Ship diesel engines. Restoring cylinder covers using welding. Typical Processes
RD 31.54.01-84: Recommendations for the replacement of foreign brands (categories) of case steels with domestic ones during repair
RD 31.55.01.01-90: Spare parts for marine diesel engines of foreign construction. Steel piston heads. Technical requirements
RD 31.55.01.02-80: Spare parts for marine diesel engines of foreign construction. Bearing shells. Technical requirements
RD 31.55.02.02-80: Spare parts of ship auxiliary mechanisms of foreign construction. Centrifugal pumps. Technical requirements
RD 31.55.03.07-86: Restoration of cast-iron diesel pistons D100 surfacing. Typical Processes
RD 31.55.08.01-89: Iron casting. Materials charge and auxiliary. Consumption rates
RD 31.55.08.04-90: Catalog of foreign brands of non-ferrous metal alloys for ship and port engineering and comparable domestic brands according to state standards
RD 31.55.08.05-88: Catalog of foreign grades of steel and cast iron for ship and port engineering and comparable domestic grades according to state standards
The Document is Referenced By:
Letter 133: About enactment of the Process Design Standards for SRW
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
