GOST 7473-85
ГОСТ 7473-85
|
|
Ready-mixed concrete. Specification
Смеси бетонные. Технические условия
Status: Not effective - Superseded. IUS 3-1996
The standard applies to concrete mixes of constructional heavy and light concrete of dense, porous and large-pore structure on cementitious binders, dense and porous coarse and fine aggregates, delivered to the consumer for the construction of monolithic and prefabricated monolithic structures and structures or used in an enterprise for the manufacture of precast concrete and reinforced concrete designs and products. The standard does not apply to concrete mixes of special concretes and structural concrete based on limestone, slag, gypsum and special binders and concretes on special aggregates.
Стандарт распространяется на бетонные смеси конструкционных тяжелых и легких бетонов плотной, поризованной и крупнопористой структуры на цементных вяжущих, плотных и пористых крупных и мелких заполнителях, отпускаемые потребителю для возведения монолитных и сборно-монолитных конструкций и сооружений или используемые на предприятии для изготовления сборных бетонных и железобетонных конструкций и изделий. Стандарт не распространяется на бетонные смеси специальных бетонов и конструкционных бетонов на основе известняковых, шлаковых, гипсовых и специальных вяжущих и бетонов на специальных заполнителях.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Construction,
12/19/1985
SKU: RUSS43760
The Product is Contained in the Following Classifiers:
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.30 Concrete and concrete products »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh13 Concretes and mortars »
National Standards for OKSTU »
REINFORCED CONCRETE STRUCTURES AND PARTS (INCLUDING REINFORCED CONCRETE CONCRETE PRODUCTS) »
Concrete and mortars »
The Document is Replaced With:
GOST 7473-94: Ready-mixed concrete. Specifications
As a Replacement Of:
GOST 7473-76: Fresh concrete. Specifications
The Document References:
GOST 10060-87: Concretes. Methods of frost resistance determination
GOST 10180-78: Concrete. Methods for determining the compressive strength and tensile strength
GOST 10181.0-81: Concrete mixtures. General requirement to test methods
GOST 10181.1-81: Concrete mixture. Test method of determination of workability
GOST 10181.2-81: Concrete mixture. Test method of determination of density
GOST 10181.3-81: Concrete mixture. Test method of determination of porosity
GOST 10181.4-81: Concrete mixtures. Test methods of determination of segregatability
GOST 10354-82: Polyethylene film Specifications
GOST 12730.1-78: Concretes. Methods of determination of density
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 16349-85: Cyclic mixers for building materials
GOST 17623-87: Concrete. Radioisotope method of average density determination
GOST 17624-87: Concrete. Ultrasonic method of strength determination
GOST 18105-86: Concretes. Rules for the strength control
GOST 18481-81: Glass hydrometers and cylinders. General specifications
GOST 2226-75: Paper bags. Specifications
GOST 22690.0-77: Heavy concrete. General requirements for methods for determining the strength without destroying, by the devices of mechanical action
GOST 22690.1-77: Heavy concrete. Methods for determining slope and plastic deformation strength
GOST 22690.2-77: Heavy concrete. Method for determining the strength with a standard Kashkarov hammer
GOST 22690.3-77: Heavy concrete. Method for determination of strength by separation
GOST 22690.4-77: Heavy concrete. Method for determining strength by cleavage of structure ribs
GOST 23732-79: Water for concretes and mortars. Specifications
GOST 25820-83: Lightweight concrete. Specifications
GOST 26633-85: Heavy-weight and sand concretes. Specifications
GOST 27005-86: Light-weight and cellular concretes. Rules of average density control
GOST 27006-86: Concretes. Rules for mix proportioning
GOST 2823-73: Glass technical thermometers. Specification
GOST 6508-81: Mortar batch mixers, cyclical. Specification
SNiP 5.01.23-83: Standard cement consumption rates for the preparation of precast concrete and monolithic concrete, reinforced concrete products and structures
The Document is Referenced By:
GOST 17623-87: Concrete. Radioisotope method of average density determination
GOST 25214-82: Dense silicate concrete. Technical requirements
GOST 25246-82: Chemically resistant concretes. Specifications
GOST 25820-83: Lightweight concrete. Specifications
GOST 26633-85: Heavy-weight and sand concretes. Specifications
GOST 27336-93: Truck concrete pumps
GOST 27339-93: Mixer trucks
GOST 6665-91: Concrete and Reinforced Concrete Curbs. Specifications
GOST 7473-94: Ready-mixed concrete. Specifications
GOST R 50083-92: Concrete pump. General specifications
GOST R 50084-92: Truck mixer. General specifications
MDS 12-5.2000: Gosgortekhnadzor of Russia Employee's Manual for Quality Control of Construction and Installation Work
ODM 218.4.003-2009: Recommendations for joining metal beams with a monolithic slab by means of continuous comb stops in steel concrete bridges
R 350-79: Guidelines for concreting foundations and communications of objects of the oil and gas industry in permafrost conditions, taking into account the hardening of concrete at negative temperatures
RB-005-98: Requirements to Certification of Building Structures Important for Safety of Nuclear Facilities
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RSN I-89: Recommendations for the use of concretes with complex antifrosty additives for monolithic structures erected in the Yakut ASSR at negative temperatures
RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.06.04-91: Bridges and pipes
TR 100-99: Recommended Practice for Construction of Auger Pile Foundations within the Area of Existing Development
TU 102-162-78: Weighers prefabricated reinforced concrete belt type UBP
TU 102-271-80: Constructions of fine-grained (sandy) concrete for series 123 residential buildings
TU 102-300-81: Weights prefabricated reinforced concrete covering type UBO
TU 102-46-75: Weights prefabricated cantilever type UKS
TU 218 RSFSR 620-90: Hard concrete mixes for the construction of cement concrete pavements and foundations of roads and airfields
VSN 212-91: Use of Natural-Porous-Aggregate Concrete in Transportation Tunnel Construction
VSN 36-86: Installation of Lining in Underground Hydraulic Structures Constructed in Rocky Permafrost Soils
VSN 46-96: Instruction on preparation and use of concrete with sodium nitrite additive in winter conditions
VSN 48-93: Installation Manual for Cast-In-Place Concrete and Reinforced Concrete Tunnel Lining for Transportation Tunnels
VSN 83-92: Technical instructions for the use of concrete and cement-sand mortars hardening in the frost, in the construction of artificial structures
VSN-1-90: Technological rules for the manufacture of centrifuged racks of contact network supports, communication lines and self-locking
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.