Model series 20.0027
Типовая серия 20.0027
|
|
Reinforced Concrete Supports for Joint Suspension of 10 kV Overhead Line Protected Wires and Self-Carrying Insulated Wires of Double-Chain 0.4 kV Overhead Line. Working drawings
Железобетонные опоры для совместной подвески защищенных проводов ВЛ 10 кВ и самонесущих изолированных проводов двухцепной ВЛ 0,4 кВ. Рабочие чертежи
Status: Status information is available in the commercial version of NormaCS. In accordance with 184-FZ On technical regulation and 162-FZ On standardization in the Russian Federation standard documentation is not a subject of standardization in Russia.
Arch. no. 20.0027.
Арх. №20.0027
Choose Language:
Format: Electronic (pdf/doc)
Approved: RAO UES of Russia,
1/1/2000
SKU: RUSS437889
The Product is Contained in the Following Classifiers:
Construction (Max) »
Reference documents »
Typical building structures, products and units »
Developed by other ministries, departments and organizations »
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
1 Organization and management of metrological support »
1.1 Basic provisions of metrological support »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.160 Welding, brazing and hard soldering »
25.160.01 Welding, brazing and soldering in general »
The Document References:
GOST 10597-87: Painting brishes. Specifications
GOST 10689-75: Soda ash from nepheline raw stock for industrial use. Specifications
GOST 11128-65: Lamp oil from sulphurous oils. Specification
GOST 11680-76: Cotton fabrics coarse Calico group. Specification
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.009-76: Occupational safety standards system. Electrical safety. Terms and definitions
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.1.038-82: Occupational safety standards system. Electric safety. Maximum permissible values of pick-up voltages and currents
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.14-75: Cables and cable fittings. Safety requirements
GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.4.016-83: Occupational safety standards system. Special protective clothes. Nomenclature of quality indexes
GOST 12.4.020-82: Occupational safety standards safety. Means for personal protection of hands. Nomenclature of quality indices
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 14841-69: Photovoltaic luxmeters
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 17299-78: Technical ethyl alcohol. Specifications
GOST 17516-72: Electrical articles. Operating conditions as to environment mechanical aspects influence
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 18353-79: Non-destructive check. Classification of types and methods
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 19607-74: Processed kaolin for chemical industry. Specifications
GOST 21285-75: Caoline concentrated for perfume industry. Specifications
GOST 21657-76: The state system of instruments. Electrical insulation. Technical requirements. Methods of tests
GOST 23349-78: Non-destructive test. Defectoscopy capillary. Technical requirements and test methods
GOST 2424-83: Grinding wheels
GOST 24522-80: Capillary non-destructive inspection. Terms and definitions
GOST 2601-84: Welding of metals. Terms and definitions of basic concepts
GOST 2603-79: Reagents. Acetone. Specifications
GOST 2763-44: Skins of lambs, tanned
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28369-89: Non-destructive testing. Ultra-violet irradiators
GOST 3-88: Surgical rubber gloves
GOST 443-76: Benzene-solvent for rubber industry. Technical requirements
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 8.002-86: State system for ensuring the uniformity of measurements. State supervision and department control of measuring instruments. Basic regulations
GOST 8.514-84: State system for ensuring the uniformity of measurements. State verification schedule for means measuring irradiance in spectrosensitomentry in the wavelength range of 0.2-1.4 um
GOST 83-79: Reagents. Sodium carbonate. Specifications
GOST 8505-80: Nefras-C 50/170. Specifications
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9411-91: Colored optical glass
GOST 9412-93: Medical gauze
GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel
GOST R 12.4.013-97: Occupational safety standards system. Goggles. General specifications
PB 03-440-02: Attestation rules for nondestructive inspection personnel
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping
PB 10-115-96: Regulations of design and safe operation of pressure vessels
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers
POT R M-016-2001: Inter-Industry Occupational Safety and Health Regulations (Safety Regulations) for Operation of Electrical Installations
PUE: Electrical Installation Rules (PUE). Chapter 1.1 General (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.2 Electricity supply and electrical networks (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.7 Grounding and Electrical Safety Precautions (Seven Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.9 Insulation of electrical installations (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.6 Electric Welding Machines (Seven Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.10. Electrolysis Plants and Plating Plants (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance Test Standards (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.1. General part (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.2. Electricity supply and electrical networks (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.3. Selection of conductors by heating, economic current density and by corona conditions (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.4. Selection of electrical devices and conductors for short circuit conditions (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.5. Electricity metering (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.6. Electrical Measurements (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.7. Grounding and Electrical Safety Precautions (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.1. Electrical Wiring (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.2. Busducts up to 35 kV (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.3. Cable lines with voltage up to 220 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Beginning) (with Amendments and additions) (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.1. Protection of electrical networks with voltage up to 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.2. Relay Protection (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.3. Automation and telemechanics (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 3.4. Secondary Circuits (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.3. Converter substations and installations (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.4. Battery Units (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.1. Electrical machine rooms (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.2. Generators and Synchronous Compensators (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.3. Electric motors and their switching devices (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.4. Crane Electrical Equipment (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.5. Elevator Electrical Equipment (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 5.6. Condensing Units (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical equipment of residential, public, administrative and domestic buildings (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor lighting (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical installations of entertainment enterprises, clubs and sports facilities (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.3. Electrical Installations in Hazardous Areas (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.4. Electrical Installations in Fire Hazardous Zones (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.5. Electrothermal Plants (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.6. Electric welding machines (sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.7. Peat electrical installations (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltages above 1 kV (End) (Sixth edition)
PUE: Electrical Installation Rules (PUE). Applications
PUE: Electrical Installation Rules (PUE). Chapter 6.6. Lighting devices and wiring devices (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor Lighting (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical Equipment for Residential and Public Buildings (Sixth Edition)
PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical equipment for entertainment enterprises, clubs and sports facilities (Sixth edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Seventh edition) (with Amendment)
PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Seventh Edition)
PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Seventh edition)
PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance test standards (Seventh edition)
RD 10-577-03: Typical instruction for metal control and extend the life of the main elements of boilers, turbines and pipelines of thermal power stations. Serie 10. Output 30.
RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.
RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)
RD 34.17.401-95: Instructions for scope and procedure of metal input control of power equipment with pressure of 9 MPa and more, before its commissioning.
RD 34.17.435-95: Methodological instructions. Technical diagnostics of boilers with working pressure up to 4.0 MPa inclusive.
Rules: Rules for technical operation of water facilities of ferrous metallurgy enterprises
SN 4557-88: Sanitary norms for ultraviolet radiation in production areas
SNiP III-40-78: Car roads
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.