imgalt

STO

СТО

Thermal power plants. Methods of assessing the condition of the main equipment

Тепловые электрические станции. Методики оценки состояния основного оборудования

Status: Status information is available in the commercial version of NormaCS

STO 70238424.27.100.011-2008 "Thermal Power Plants. Methods of estimation of a condition of the basic equipment", approved by order NP "INVEL" from 01.07.2008 N 12/11

с 31.10.2008 действует СТО 70238424.27.100.011-2008 "Тепловые электрические станции. Методики оценки состояния основного оборудования", утвержденный приказом НП "ИНВЭЛ" от 01.07.2008 N 12/11

Choose Language: 
Format: Electronic (pdf/doc)

Approved: RAO UES of Russia, 3/28/2007

SKU: RUSS437890

Price: $199.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Sectoral and departmental regulatory and methodological documents » Design and construction of energy facilities »

PromExpert » SECTION IV. INDUSTRIAL SAFETY » II Industrial safety requirements for operation of a hazardous production facility » 3 Energy security » 3.1 General safety requirements for energy facilities »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.13 Operation of power plants and heat networks »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.1 Operation of industrial buildings and structures »

ISO classifier » 27 ENERGY AND HEATING TECHNOLOGY » 27.100 Power stations in general »


The Document References:

Federal Law 184-FZ: About technical regulation

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 11677-85: Power transformers

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements

GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements

GOST 12.2.003-91: Industrial equipment. General safety requirements

GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements

GOST 12068-66: Mineral oils. Method for determination of demulsification time

GOST 12503-75: Steel Methods of ultrasonic control. General requirements

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 1497-84: Metals. Methods of tension test

GOST 1516.1-76: Electrical equipment for ac voltages of 3 to 500 kv

GOST 1516.2-97: Electrical equipment and installations for a.c. voltage 3 kV and higher. General methods of dielectric tests

GOST 1516.3-96: Electrical equipment for a.c. voltages from 1 to 750 kV. Requirements for dielectric strength of insulation

GOST 1547-84: Oils and greases. Methods for determination of water presence

GOST 16110-82: Power transformers. Terms and definitions

GOST 17216-2001: Industrial cleanliness. Grades of liquids purity

GOST 17216-71: Industrial purity

GOST 18322-78: Equipment maintenance and repair system. Terms and definitions

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 2.601-95: Operational documents

GOST 2.602-95: Unified system for design documentation. Repair documents

GOST 20243-74: Power transformers. Methods of short-circuit tests

GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications

GOST 20911-89: Technical diagnostics. Terms and definitions

GOST 21023-75: Power transformers. Methods of measuring partial discharge characteristics during power frequency voltage testing

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 22756-77: Power and voltage transformers and reactors. Test methods of electric insulation strength

GOST 22761-77: Metals and alloys. Brinell hardness test by static action portable hardness meters

GOST 23660-79: System of technical maintenance and repair of equipment. Maintainability and reparability for item development

GOST 24156-80: Steam-eductoring sprayers. General technical requirements

GOST 24278-89: Stationary steam turbine plants for driving electric generators at thermal power stations

GOST 26656-85: Technical diagnostics. Testability. General requirements

GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions

GOST 27.301-95: Dependability in techniques. Dependability prediction. Basic principles

GOST 27.310-95: Dependability in techniques. Failure mode, effects and criticality analysis. Basic principles

GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability

GOST 27518-87: Diagnostics of items. General reguirements

GOST 28269-89: High-power stationary steam boilers

GOST 28702-90: Non-destructive testing. Ultrasonic thickness gauges. General technical requirements

GOST 29328-92: Stationary gas turbines for turbo generators. General technical requirements

GOST 3484.1-88: Power transformers. Electromagnetic test methods

GOST 3484.2-88: Power transformers. Heating tests

GOST 3484.3-88: Power transformers. Measuring methods of dielectric parameters of insulation

GOST 3484.4-88: Power transformers. Tank tests for strength

GOST 3484.5-88: Power transformers. Tank tests for leakages

GOST 533-2000: Rotating electrical machinery. Turbo-generators. General specifications

GOST 5985-79: Petroleum products. Method for determination of acidity and acid number

GOST 6370-83: Petroleum, petroleum products and additives Methods for determination of mechanical admixtures

GOST 6581-75: Liquid electrical insulating materials. Electric test methods

GOST 687-78: Ac breakers for the voltage exceeding 1000 v

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 8008-75: Power transformers. Test methods of tap changing devices

GOST 8024-90: Alternating current apparatus and devices for voltages above 1000 V. Temperature rise at continuous duty. Norms and test methods

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST R 1.12-2004: Standardization in the Russian Federation. Terms and definitions

GOST R 1.4-2004: Standardization in Russian Federation. Standards of organizations. General

GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication

GOST R 22.0.05-94: Safety in emergencies. Technogenic emergencies. Terms and definitions

GOST R 50831-95: Boiler plant. Heat-mechanical equipment. General technical requirements

GOST R 51751-2001: Non-destructive testing. Non-destructive testing for evaluation of critical high-loaded elements when exposed to significant temperature and forces. General requirements for guidance of the selection of methods

GOST R 51898-2002: Safety aspects. Guidelines for their inclusion in standards

GOST R 51901.1-2002: Risk management. Risk analysis of technological systems

GOST R 51901.2-2005: Risk management. Dependability management systems

GOST R 52565-2006: Alternating-current circuit-breakers for voltages from 3 to 750 kV. General specifications

Order 229: On the establishment of a fishing limit for certain types of aquatic biological resources in 2018

OST 108.961.02-79: Carbon and alloy steel castings for components of stationary steam turbines with secured strength properties at high temperatures. Specifications.

OST 108.961.03-79: Carbon and alloy steel castings for shaped elements of steam boilers and piping with secured strength properties at high temperatures. Specifications.

PB 03-246-98: Rules for audit of industrial safety

PB 03-585-03: Process Pipelines Design and Safe Operation Rules

PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.

PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers

PUE: Electrical Installation Rules (PUE). Chapter 1.1 General (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.2 Electricity supply and electrical networks (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.7 Grounding and Electrical Safety Precautions (Seven Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.9 Insulation of electrical installations (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.6 Electric Welding Machines (Seven Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.10. Electrolysis Plants and Plating Plants (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance Test Standards (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.1. General part (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.2. Electricity supply and electrical networks (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.3. Selection of conductors by heating, economic current density and by corona conditions (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.4. Selection of electrical devices and conductors for short circuit conditions (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.5. Electricity metering (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.6. Electrical Measurements (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.7. Grounding and Electrical Safety Precautions (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.1. Electrical Wiring (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.2. Busducts up to 35 kV (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.3. Cable lines with voltage up to 220 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Beginning) (with Amendments and additions) (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.1. Protection of electrical networks with voltage up to 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.2. Relay Protection (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.3. Automation and telemechanics (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.4. Secondary Circuits (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.3. Converter substations and installations (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.4. Battery Units (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.1. Electrical machine rooms (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.2. Generators and Synchronous Compensators (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.3. Electric motors and their switching devices (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.4. Crane Electrical Equipment (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.5. Elevator Electrical Equipment (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.6. Condensing Units (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical equipment of residential, public, administrative and domestic buildings (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor lighting (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical installations of entertainment enterprises, clubs and sports facilities (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.3. Electrical Installations in Hazardous Areas (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.4. Electrical Installations in Fire Hazardous Zones (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.5. Electrothermal Plants (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.6. Electric welding machines (sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.7. Peat electrical installations (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltages above 1 kV (End) (Sixth edition)

PUE: Electrical Installation Rules (PUE). Applications

PUE: Electrical Installation Rules (PUE). Chapter 6.6. Lighting devices and wiring devices (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor Lighting (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical Equipment for Residential and Public Buildings (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical equipment for entertainment enterprises, clubs and sports facilities (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Seventh edition) (with Amendment)

PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance test standards (Seventh edition)

RD 03-10-2004: Instruction on the issue of permits for the use of specific types of devices at hazardous industrial facilities from the central office of the federal ecological, technological and atomic supervision service

RD 03-418-01: Methodical instruction for risk analysis of hazardous production plants

RD 03-485-02: Provision on the procedure of permit issuance for application of equipment at hazardous industrial plants

RD 03-496-02: Impact assessment from accidents at hazardous production facilities

RD 03-606-03: Instructions for visual and measuring control

RD 03-85-95: Rules On the Certification of Controlled Goods for Potentially Hazardous Industrial Production, Objects and Works

RD 09-102-95: Methodological guidelines for determining the residual life of hazardous facilities, supervised by Federal Mining and Industrial Inspectorate of Russia.

RD 10-197-98: Guidelines for Operating Condition Assessment of Bolted and Riveted Joints of Hoisting Cranes

RD 10-210-98: Procedural Guidelines for Technical Inspection of Metal Structures of Steam and Hot Water Boilers

RD 10-249-98: Strength calculation norms for stationary boilers and steam and hot water pipelines.

RD 10-577-03: Typical instruction for metal control and extend the life of the main elements of boilers, turbines and pipelines of thermal power stations. Serie 10. Output 30.

RD 153-34.0-03.125-2002: Ordinance on Process Monitoring of Compliance with Industrial Safety Requirements at Hazardous Production Facilities Administered by KES of Russia, RAO

RD 153-34.0-17.464-00: Guidelines for metal control and extension of the service life of pipelines of categories I, III and IV

RD 153-34.0-20.363-99: Method for Infrared Inspection of Electrical Equipment and Overhead Lines

RD 153-34.0-43.210-00: Turbine, Petroleum-Based, and Fireresistant Oils. Method for the Determination of Air Content of Oil by Volume

RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.

RD 153-34.1-17.424-2001: Procedural Guidelines for Investigation of Causes of Damage to Steam Turbine Rotor Components

RD 153-34.1-17.454-98: Procedural Guidelines for Inspection of Rotor Heat Grooves and Fillet Junctions of Steam Turbines at Thermal Power Stations Using Eddy Current Flaw Detector "Zond VD-96

RD 153-34.1-17.462-00: Procedural Guidelines Assessment of Serviceability of Steam Turbine Blades in the Process of Manufacturing, Operation, and Repair

RD 153-34.1-17.466-2002: Procedural Guidelines for Detection of Structural Inhomogeinity in Metal of Final-Stage Blades of Low-Pressure Section of Steam Turbines Made from Steel EI961-Sh in Area Where Steelite Plates are Welded on

RD 153-34.1-17.467-2001: Rapid method for evaluating remaining life of boiler header and steam pipeline joints according to structure factor.

RD 153-34.1-20.202-2003: Model Regulations on the Procedure for Preparing Documentation for the Decommissioning of Worn-Out Generating Equipment of Power Plants Included in the Unified Energy System of Russia

RD 153-34.1-30.311-96: Procedural Guidelines for Accelerated Tests of Steam Turbines of Thermal Power Stations

RD 153-34.1-30.604-00: Guidelines for balancing multi-shaft shafts of turbine units at power plants

RD 153-34.1-37.306-2001: Guidelines for monitoring the state of the main equipment of thermal power plants, determining the amount and chemical composition of deposits

RD 153-34.1-39.401-00: Procedural Guidelines for Initial Adjustment of Piping Systems at In-Service Thermal Power Stations

RD 153-34.1-43.106-2001: Model Guidelines for Acceptance, Storage, and Use of Fireresistant Turbine Oils Type OMTI

RD 153-34.1-43.204-2001: Petroleum-Based and Fireresistant Turbine Oils. Quantitative Method for the Determination of Anticorrosion Properties

RD 153-34.1-43.211-2000: Fire and mineral turbine oils. Method for determination of deaerating properties and autoignition temperature

RD 153-34.1-43.212-2000: Fire and mineral turbine oils. Method for determining auto-ignition temperature

RD 24.020.11-93: Welded joints of stationary steam, gas and hydraulic turbines. Testing rules and quality evaluation standards.

RD 34.17.302-97: Steam and hot water boilers, steam and hot-water-pipelines. Welding. General requirements. Quality control. Ultrasonic control. Main principles.

RD 34.17.306: Procedural Guidelines for Metallographic Analysis for Quality Assessment and Investigations of Causes of Damage to Welded Joints in Steam Lines Made from Steels 12Kh1MF and 15Kh1MF at Thermal Power Stations

RD 34.17.307-89: Procedural Guidelines for Ultrasonic Flaw Detection of Corner Welded Joints of Couplings to Manifold Bases of Steam Boilers Thermal at Electric Power Generating Stations

RD 34.17.417: Ordinance on Assessment of Service Life and Procedure for Inspection and Replacement of Bends in Unheated Pipes of Boilers with Operating Pressure of 10 and 14 MPa

RD 34.17.418: Instructions for crack detection of pipeline bends made of pearlitic steel.

RD 34.17.436-92: Procedural Guidelines. Individual Inspection of Metal of Cast Housing Components for Steam Turbines

RD 34.17.449-97: Method for Eddy Current Inspection of Steam Turbine Blades for Thermal Power Stations Using Flaw Detector "Zoned VD-96

RD 34.17.452-98: Procedural Guidelines for Assessment of Remaining Service Life of Superheaters of Electric Power Generating Station Boilers

RD 34.20.581-96: Method for Operating Condition Assessment of Steam Turbine Units Prior to and After Repair and in the Period Between Repairs

RD 34.20.801-2000: Guidelines for Investigation and Recordkeeping of Technical Violations in the Operation of Power Systems, Electric Supply Stations, Boiler Plants, Electrical Systems, and Piped Heat Distribution Systems

RD 34.26.401: Guidelines for Inspection and Acceptance of Internal Devices in Boilers

RD 34.30.506-90: Procedural Guidelines for Standardization of Thermal Expansion of Steam Turbine Cylinders at Thermal Power Stations

RD 34.30.507-92: Procedural Guidelines for the Prevention of Corrosion Damage to Disk and Blade Apparatus of Steam Turbines in Phase Transition Zone

RD 34.30.508-93: Model Guidelines for Operation of Oil Systems Using Mineral Oil for Turbine Units with Power of 100-800 MW

RD 34.39.301-87: Procedural Guidelines for Monitoring Thermal Expansion of Steam Lines in Thermal Power Stations

RD 34.39.503-89: Model Guidelines for Operation of Thermal Power Station Piping Systems

RD 34.43.102-96: Guidelines for Use of Petroleum-Based Turbine Oils

RD 34.43.104-88: Procedural Guidelines for Adding Additive to Turbine Oil Tp-22s and Tp-30

RD 34.43.105-89: Procedural Guidelines for Use of Transformer Oils

RD 34.43.107-95: Procedural Guidelines for the Determination of Content of Water and Air in Transformer Oil

RD 34.43.202-84: Transformer oils. Method for determining the content of solids

RD 34.43.206-94: Methods for Quantitative Chemical Analysis. Determination of Content of Furane Derivatives in Electrical Insulating Oils by Liquid Chromatography

RD 34.43.208-95: Methods for Quantitative Chemical Analysis. Determination of Content of Additives in Oils Used in Energy Equipment by High Performance Liquid Chromatography

RD 34.43.209-97: Accelerated Method for the Determination of Anti-Oxidative Additive (Ionol) in Fresh and Used Turbine Oils

RD 34.45.309-92: Procedural Guidelines for Heating Tests of Generators

RD 34.45-51.300-97: Electrical equipment testing scope and standards.

RD 34.46.303-98: Procedural Guidelines for Preparation for and Performance of Chromatographic Analysis of Gases Dissolved in the Oil of Power Transformers

RD 34.46.502-79: Instructions for determining the nature of internal damage to transformers for analyzing gas from a gas relay

RD 34.51.304-94: Procedural Guidelines for Use of Thin-Layer Chromatography in Power Systems for Assessment of Remaining Service Life of Solid Insulation from the Presence of Furan Compounds in Transformer Oil

Resolution 43: On measures for the prevention of influenza and acute respiratory viral infections in the epidemiological season 2012-2013

RTM 24.038.08-72: Calculation of energy installations pipelines

SO 153-34.17.440-2003: Instructions for extending the life of steam turbines beyond the park resource

SO 153-34.17.442-2003: Instructions on how to extend the service life of high-pressure boiler drums

SO 153-34.17.448-2003: Instructions for extending service life period of core element metal in turbines and compressors of power gas turbine plants.

SO 153-34.17.462-2003: Instructions on how to assess the performance of steam turbine blades in the process of manufacturing, operation and repair

SO 153-34.17.464-2003: Instructions for extending the service life of pipelines of categories II, III and IV

SO 153-34.17.469-2003: Instructions for extending the safe operation period for steam boilers with working pressure up to 4.0 MPa inclusive and hot water boilers with water temperature above 115 °C.

SO 153-34.17.470-2003: Instructions on the procedure for inspection and extension of the service life of steam pipelines beyond the park resource

SO 153-34.17.471-2003: Guidelines for determining the characteristics of heat resistance and durability of metal boilers, turbines and pipelines

SO 153-34.26.608-2003: Instructions for inspection and repair technology for high-pressure boiler drums

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Heating, Ventilation and Air Conditioning (HVAC)
Language: English
Price: $430.00
imgalt
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
imgalt
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
imgalt
Sponge titanium. Specifications
Language: English
Price: $79.00
imgalt
Goat whole drinking milk. Specifications
Language: English
Price: $168.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
Seamless steel pipes for steam boilers and pipelines
Language: English
Price: $581.17
imgalt
Packaging. Determination of formaldehyde concentration in water and model environments
Language: English
Price: $217.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English
Price: $226.00
imgalt
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English
Price: $348.00
imgalt
Pipe fittings. Passport. Rules for development and design
Language: English
Price: $254.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!