GOST 8268-82
ГОСТ 8268-82
|
|
Gravel for construction work
Гравий для строительных работ. Технические условия
Status: Not effective - Superseded. IUS 1-1995
The standard applies to gravel with an average density, including pores, (by bulk) of more than 2.0 g / cm3, obtained by sieving natural gravel-sand mixtures
Стандарт распространяется на гравий со средней плотностью, включая поры, (объемной массой) свыше 2,0 г/см3, получаемый рассевом природных гравийно-песчаных смесей
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Construction,
7/26/1982
SKU: RUSS43838
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.1 Testing and control of products of mining and non-metallic industry »
4.1.2 Non-metallic minerals, materials and products »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.15 Mineral materials and products »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.15 Mineral materials and products »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh17 Inorganic and organic fillers »
National Standards for OKSTU »
CONSTRUCTION MATERIALS, EXCEPT REFINED CONCRETE STRUCTURES AND PARTS »
Non-metallic building materials »
The Document is Replaced With:
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
As a Replacement Of:
GOST 8268-74: Gravel for construction work
The Document References:
GOST 1.9-67: State System of Standardization. State Quality Mark. Form, dimensions and application rules
GOST 24100-80: Raw materials for crushed gravel, gravel and sand for construction. Technical requirements and test methods
GOST 7394-77: Gravel and gravel-sandy ballast for the railway track. Specification
GOST 8269-76: Crushed stone from natural stone, gravel and crushed stone from gravel for construction works. Methods of tests
GOST 8269-87: Crushed aggregate of natural rock, crushed-gravel aggregate and gravel for construction work. Testing methods
The Document is Referenced By:
GOST 10260-82: Crushed stone gravel for construction works. Specification
GOST 10268-80: Heavy concrete. Technical requirements for fillers
GOST 25246-82: Chemically resistant concretes. Specifications
GOST 25877-83: Road tar concrete mixtures and tar concrete. Specifications
GOST 6133-84: Concrete wall stone. Specifications
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8269-76: Crushed stone from natural stone, gravel and crushed stone from gravel for construction works. Methods of tests
GOST 8269-87: Crushed aggregate of natural rock, crushed-gravel aggregate and gravel for construction work. Testing methods
GOST 9128-84: Asphaltic concrete mixtures for roads and airdromes and asphaltic concrete. Specifications
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083
Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP
Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems
Manual for SNiP 2.04.02-84: Cooling Tower Design Guide
Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment
Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants
Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems
Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks
Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities
Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction
Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)
Manual for SNiP 3.06.03-85: Manual for the construction of asphalt concrete pavements and foundations of roads and airfields
Manual for SNiP 3.06.03-85: Manual for surface treatment on roads
Manual for SNiP 3.06.03-85: Manual on the construction of coatings and foundations of roads and airfields from soils reinforced with cementing materials to SNiP 3.06.03-85 and SNiP 3.06.06-88
Manual for SNiP 3.06.03-85: Manual for the preparation and use of bitumen road emulsions
Manual for SNiP 3.07.02-87: Allowance for the production and acceptance of work during the construction of new, reconstruction and expansion of existing hydrotechnical sea and river transport facilities
ONTP 18-85: All-Union Norms of Technological Design of Nonmetallic Building Materials Enterprises
RD 12.13.055-87: Instructions for the preparation and use of concrete and mortar for mining coal mines
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RSN 342-86: Technology for reinforcing building structures in reconstructed enterprises
RSN-88: Design and Construction of Roads and Highways in Non-Chernozem Areas of the RSFSR
SN 277-80: Guidelines for the Fabrication of Cellular Concrete Products
SN 394-74: Instructions for the design of roll and mastic roofing of buildings and structures of industrial enterprises
SN 525-80: Process Guidelines for Making Polymer Concretes and Polymer Concrete Products
SN 549-82: Guidelines for the Design, Fabrication, and Application of Structures and Products Made of Organic Fiber Reinforced Concrete (Arbolite)
SNiP 3.03.01-87: Bearing and enclosing structures
TSN KR-97 MO: Roofing. Technical requirements and acceptance rules
TU 102-738-95: Weighted reinforced concrete marsh wedge with a diameter of 530, 426, 525 with low steel reinforcement consumption (1 UBKm, 2 UBKm)
TU 218 RSFSR 620-90: Hard concrete mixes for the construction of cement concrete pavements and foundations of roads and airfields
Turkmenistan Guidelines for the development and application of standards: Guidelines for the development and application of standards for unavoidable losses and waste of materials in construction
VSN 123-77: Instruction for installation of paving and roadbeds made from crushed stone, gravel and sand materials impregnated with organic binders
VSN 182-91: Standards for Road Construction Material Surveying and the Design and Development of Near-Road Quarries for Road and Highway Construction
VSN 184-75: Technical guidelines for the installation of pavement bases made of stone materials, not reinforced and fortified with inorganic binders
VSN 18-95: Guidelines for Using Polymer, Bitumen Polymer, and Roll Waterproofing Materials for Installation of New Roofing and Repair of Existing Roofing of Residential, Public, and Factory and Industrial Occupancies
VSN 27-76: Technical Instructions for the Use of Bitumen Sludges for Arrangement of Protective Layers on Roads
VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III
VSN 38-90: Technical Guidelines for the Construction of High-Friction Road Pavements
VSN 48-93: Installation Manual for Cast-In-Place Concrete and Reinforced Concrete Tunnel Lining for Transportation Tunnels
VSN 66-89-76: Guidelines to Exterior Finishes for Exterior Wall Panels
VSN 7-89: Guidelines for the Construction, Repair, and Maintenance of Gravel Pavements
VSN 9-94: Flooring Guidelines for Residential and Public Buildings
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.