imgalt

GOST 9378-75

ГОСТ 9378-75

Surface roughness comparison specimens. Technical requirements

Образцы шероховатости поверхности (сравнения). Общие технические условия

Status: Not effective - Superseded. IUS 10-1994


Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 11/27/1975

SKU: RUSS43884


Price: imgalt
imgalt

The Product is Contained in the Following Classifiers:

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.20 Surface properties »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.20 Surface properties »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P5 Instruments, tools and devices for linear, angular, profile and spatial measurements » P52 Instruments and tools for controlling roughness, shape and location of surfaces »

National Standards for OKSTU » TOOL, TECHNOLOGICAL TOOLING, ABRASIVE MATERIALS » Instrument on other bundles »


The Document is Replaced With:

GOST 9378-93: Roughness comparison specimens

As a Replacement Of:

GOST 9378-60: Samples of surface roughness (working). Technical requirements

The Document References:

GOST 13762-68: Instruments for linear and angular measurements. Marking, packing, transportation and storage

GOST 2789-73: Surface roughness. Parameters and characteristics

The Document is Referenced By:

GOST 10673-75: T-slot cutters with hard metal tips. Specifications

GOST 10773-80: Grooved pins-full-length taper grooved. Specifications

GOST 10774-80: Cylindrical pins with drilled ends. Specifications

GOST 10908-75: Mechanical quadrants with level. Specifications

GOST 11007-66: Measuring tips of apparatus for linear measurements. Specifications

GOST 11031-76: Metal travellers for rings of spinning and ring-doubling frams. Specifications

GOST 11101-93: Air foam hoses. Specifications.

GOST 11290-80: Circular woodworking groove cutters

GOST 12207-79: Cylindrical pins with internal thread. Specifications

GOST 12509-75: Carbide tipped counterbores. Technical requirements

GOST 12850-80: Cylindrical notched pins with engaged ends. Sizes and technical requirements

GOST 13006-67: State system for ensuring the uniformity of measurements. Angle meters. Verification method

GOST 13944-86: Retaining spring flat rings and grooves for them. Specifications

GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications

GOST 14229-78: Spring pins. Specification

GOST 14803-85: Rivets (high precision). General specifications

GOST 14901-93: Moulds for the manufacture of industrial rubber articles

GOST 14952-75: Combined centre drills. Specifications

GOST 14953-80: Taper countersinks

GOST 15127-83: Solid worm hobs for cutting of teeth on the sprockets for the driving roller chains and bush chains

GOST 1523-81: Straight reamers

GOST 15863-81: Plate blanks of die sets for plate blanks of die sets for sheet presswork for shearing operations

GOST 16088-70: Solid carbide machine reamers. Specifications

GOST 1677-75: Solid counterbores and high steel inserted blade counterbores. Technical requirements

GOST 17007-80: Disk diamond wheels

GOST 17270-71: Frames for hand hack-saws. Specifications

GOST 17277-71: Solid carbide twist drills. Specifications

GOST 17342-81: Knives for chipping machines

GOST 17564-85: Diamond needles

GOST 18064-72: Solid carbide boring tools with steel shank. Specifications

GOST 18104-81: Forms of steel for the manufacture of reinforced concrete centrifuged non-pressure pipes. Specification

GOST 18123-82: Washers

GOST 18372-73: Carbide end mills. Specifications

GOST 18479-73: Planer-type circular saws for sawing of wood. Technical conditions

GOST 18844-73: Non-slaving taps. Technical requirements

GOST 18949-73: Carbide-tipped spherical, cylindrical and conical end milling cutters for cutting hardworking steels and alloys. Technical requirements

GOST 18981-73: Pipe toggle wrenches

GOST 19119-80: Taper axially splitted pins. Specifications

GOST 19126-79: Metallic medical instruments

GOST 19316-73: Centrifugal moulds. Specifications

GOST 19316-98: Centrifugal moulds. Specifications

GOST 19584-80: Units and replaceable parts of universal re-adjustable hammer dies for precision die forging by means of crank presses

GOST 19752-84: Sealing metal flat gaskets for closed gates. Specifications

GOST 19755-84: Sealing metal conical gaskets for closed gates. Specifications

GOST 19853-74: Lubricating plugs. Specifications

GOST 19879-74: Carbide tipped machine taps for pipe cylindrical thread. Specifications

GOST 2021-90: Ship's steel manholes. Specifications

GOST 2034-80: Twist drills

GOST 20698-75: Twist drills for hard to machine materials. Specifications

GOST 20889-88: Pulleys for driving V-belts with normal sections. General specifications

GOST 21542-76: Carbide tipped counterbores for machining stainless and high-temperature steels and alloys. Specifications

GOST 21545-76: Solid carbide counterbores for machining stainless and high-temperature steels and alloys. Specifications

GOST 21546-88: Hammer dies for die forging

GOST 21643-82: Mechanical surgical suturing devices

GOST 21765-76: Self-opening threadcutting die heads with circular. Technical conditions

GOST 22053-76: Woodcutting twist drills with centre and undercutters. Specifications

GOST 22057-76: Woodcutting twist drills. Technical conditions

GOST 22082-76: Injection mould bases, detail-blanks and details of injection moulds. Specifications

GOST 22472-87: Dies for a sheet-metal stamping

GOST 2248-80: Flat thread-rolling dies

GOST 22685-77: Forms for making control samples of concrete. Specification

GOST 2287-88: Flat thread chasers

GOST 2300-81: Inserted pins with a tongue. Specifications

GOST 23118-78: Structural metalwork. General specifications

GOST 23249-78: End cutters for use on NC machine tools for machining parts of high-resistant steels, titanium and light alloys. Specifications

GOST 24145-80: Domestic containers for bread. General specifications

GOST 24296-80: Hardened cylindrical pins. Specifications

GOST 24360-80: Shell-type face mills with inserted carbide teeth

GOST 24474-80: Marking tools

GOST 24586-90: Soils. Laboratory methods for determining strength and strain characteristics of frozen soils

GOST 24741-81: Joint for connection of crane rails to steel crane girders. Specifications

GOST 25056-81: Cast deck and ship hawses. Specifications

GOST 25088-81: Ship's doors. Specifications

GOST 25594-83: Honing diamond bars

GOST 25605-83: Hand operated socket wrenches and drive parts

GOST 25982-83: Stomatologic tips for a microdrive

GOST 26258-87: Counterbores designed for working bearing surfaces under fastenings. Specifications

GOST 26339-84: Annular diamond drills

GOST 26405-84: Tools for manufacturing bolts and nuts using cold heading machines

GOST 26665-91: Metal bodied planes. Technical specifications

GOST 2679-73: Slitting and cut-off cutters

GOST 27579-88: Rectangular formed-welded section roof trusses. Specifications

GOST 27724-88: Drills with mechanical fixation of replaceable polyhedral plates

GOST 2786-82: Testing glasses for radii and form control of spherical optical surfaces. Specifications

GOST 28037-89: Wire cutters

GOST 28709-90: Helical end mills with elongated body and hard-alloyed change inserts

GOST 28762-90: Replaceable cutting inserts in superhard materials

GOST 28950-91: Drawing instruments. General technical requirements and test methods

GOST 3057-90: Disk springs. Specifications

GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines

GOST 3548-79: Photographic film spool 61,5 mm wide. Specifications

GOST 4045-75: Hand-operated bench vice

GOST 538-78: Window and door fittings. General specifications

GOST 5524-75: Saws for vertical gang mills

GOST 5641-66: Prisms for testing and marking

GOST 5735-81: Carbide tipped machine reamers. Specifications

GOST 6227-80: Taper-thread taps

GOST 6228-80: Round screw dies for taper thread

GOST 7063-72: T-slot cutters. Specifications

GOST 7183-93: Foam mixers. Specifications.

GOST 7236-93: Flat-nose pliers. Specifications

GOST 7890-84: Travelling single-girder suspended cranes. Specifications

GOST 8.113-85: State system for ensuring the uniformity of measurements. Vernier callipers. Verification methods

GOST 8.126-74: The State Measurement System. Scales automobile stationary. Methods and means of verification

GOST 8.236-77: State system for ensuring the uniformity of measurements. Measuring knives. Methods and means of verification

GOST 8.260-77: State system for ensuring the uniformity of measurements. Measuring lever-toothed gear heads. Procedure of verification

GOST 8.342-79: State system for ensuring the uniformity of measurements. Hole gauges graduated in 0,001 and 0,002mm. Methods and means of verification

GOST 8.376-80: State system for ensuring the uniformity of measurements. Universal instruments for measuring solvents. Methods and means of verification

GOST 8.393-80: State system for ensuring the uniformity of measurements. Optical quadrants. Methods and means of verification

GOST 8.453-82: State system for ensuring the uniformity of measurements. Balance for static weighting. Methods and means for verification

GOST 8.459-82: State system for ensuring the uniformity of measurements. Pitch difference measuring instruments. Methods and means of verification

GOST 8.548-86: State system for ensuring the uniformity of measurements. Clock-type dial indicators graduated in unit divisions of 0,01mm. Procedure of verification

GOST 8483-81: Fishing taps and overshots for prospecting

GOST 8565-81: Exploration bell sockets

GOST 8570-80: Disk shavers

GOST 8913-76: Electrical measuring instruments. Pivots. Technical requirements

GOST 8994-80: Wood-cutting cylindrical end milling cutters

GOST 9140-78: Keyway cutters. Specifications

GOST 9324-80: Finishing single-thread hobs for involute spur-wheels

GOST 9378-93: Roughness comparison specimens

GOST 9464-79: Taper pins with internal thread. Construction and dimensions

GOST 9465-79: Taper pins with threaded stem. Construction and dimensions

GOST 9539-72: Thread rolls. Specifications

GOST 9615-79: Motion-picture camera spools for 16-mm film. General specification

GOST 9650-80: Pins. Specifications

GOST 9740-71: Circular screw dies. Specifications

GOST 9923-80: Manual fire barrel. Specifications

GOST R 50059-92: Travelling single-girder suspended cranes. Specifications

GOST R 50072-92: Multiple slip joint pliers. Specifications

GOST R 50300-92: Turning tools with indexable inserts of superhard materials. Specifications

GOST R 50302-92: Regrindale superhard material (composite) tipped cartridges for toolholders. Specifications

GOST R 50640-94: Pulleys belt drives. General technical requirements

GOST R 52589-2006: Carbide tipped end milling cutters for machining wood materials and plastics. Specifications and safety requirements

MI 1382-86: Guidelines. Protractor pendulum. Type ZURI-M. Method of verification

MI 1585-86: Guidelines. GSE. Device type 2URI. Method of verification

MI 1604-87: Guidelines. GSE. The measures of length are end-plane-parallel. General requirements for calibration procedures

MI 1673-87: State system for ensuring uniformity of measurements. Stakes and supports for gage heads. Methods of control

MI 1724-87: Guidelines. State system for ensuring uniformity of measurements. Thickness gauge indicator with the price division of 0.01 and 0.1 mm. Method of verification

MI 1725-87: Methodical instructions. GSI. Spring measuring heads with a division price of 0.05 and 0.02 mm. Verification Method

MI 1729-87: State system for ensuring uniformity of measurements. Calibration lines. Method of verification

MI 1790-87: State system for ensuring uniformity of measurements. Small spring measuring heads. Mixers. Verification Method

MI 1795-87: Patterns of travel control KSH gauge 1520 mm. Control method

MI 1799-87: Guidelines. Squares testing 90 degrees. Control method

MI 1812-87: Gages threaded tapered. Methods of control

MI 1813-87: Methodical instructions. State system for ensuring uniformity of measurements. Spring measuring heads. Verification Method

MI 1814-87: Guidelines. State system for ensuring uniformity of measurements. Stenkomery indicator with the price of division 0, 01 and 0.1 mm. Method of verification

MI 181-79: Method of calibration of optical gear meters

MI 1850-88: State system for ensuring uniformity of measurements. Samples of surface roughness (comparison). Method of verification

MI 1863-88: Guidelines. State system for ensuring uniformity of measurements. The heads are measuring spring-optical. Opticators Method of verification

MI 1875-88: Guidelines. State system for ensuring uniformity of measurements. Plates are plane-parallel glass. Method of verification

MI 1876-88: Recommendations. GSE. Multiturn indicators with a scale division of 0.001 and 0.002 mm. Method of verification

MI 1904-88: Threaded cylindrical gauges. Methods of control

MI 1919-88: Lever shackles. Method of verification

MI 1927-88: Recommendation. Calibers are smooth for cylindrical shafts and holes

MI 1928-88: State system for ensuring uniformity of measurements. Indicators lever and gear with the price of division of 0,01 mm. Method of verification

MI 1937-88: Gauges for taper connections. Methods of control

MI 1946-88: Methodical instructions. GSI Normalyzers. Models БВ-5045, БВ-5046, 22202. Verification procedure

MI 1988-89: Guidelines. State system for ensuring uniformity of measurements. Zubomer. Model 23900. Method of verification

MI 2007-89: State system for ensuring uniformity of measurements. Testing and marking plates. Method of verification

MI 2024-89: State system for ensuring uniformity of measurements. Metal measuring rulers. Method of verification

MI 2029-89: Calibration and marking prisms with one prismatic recess and grip. Methods of control

MI 2031-89: Calibration and marking iron prisms. Methods of control

MI 2051-90: Guidelines. GSE. Lever micrometers. Method of verification

MI 2056-90: Pneumatic plugs for holes from 3 to 160 mm. Methods of control.

MI 2066-90: Sets of accessories to plane-parallel end measures of length

MI 2077-90: Micrometers with inserts

MI 2078-90: Wires and rollers

MI 2087-90: Recommendation. State system for ensuring uniformity of measurements. Micrometers desktop with a dial reading device. Method of verification

MI 2106-90: Setting rings for measuring the diameters of the holes

MI 2130-91: Recommendation. State system for ensuring uniformity of measurements. Universal involutes of firms Zeiss Jena, Maag, Klingelnberg, Hofler, Osaka Seimitsu Kikai and Hamai. Verification Method

MI 2131-90: Goniometers with nonius

MI 2190-92: State system for ensuring uniformity of measurements. Shtangenreysmasy. Method of verification

MI 2191-92: Recommendation. State system for ensuring uniformity of measurements. Sinus rulers. Verification Method

MI 2192-92: State system for ensuring uniformity of measurements. Indicators of the watch type with a division value of 0.01 mm. Method of verification

MI 2193-92: Inside calipers, with a scale division of 0.001 and 0.002 mm.

MI 2194-92: State system for ensuring uniformity of measurements. Nutromera indicator with the price of division of 0.01 mm. Methods of verification

MI 2195-92: Recommendation. State system for ensuring uniformity of measurements. Lever-gear measuring heads. Verification Method

MI 2196-92: Depth gauges

MI 2585-2000: State system for ensuring uniformity of measurements. Diaphragm measuring piping. Primary calibration technique

MI 2638-2001: State system for ensuring uniformity of measurements. Chamber and tubeless diaphragms installed in flanged connections of measuring pipelines. Dimensional control methods for the primary and periodic calibration of measuring systems with restricting devices

MI 272-82: State system for ensuring uniformity of measurements. Methodical instructions. Commodity scales. Methods of calibration using the UGP-3 deadweight device

MI 316-83: State system for ensuring uniformity of measurements. Methodical instructions. Length vertical IZV-5. Methods and means of verification

MI 379-83: Methodical instructions. Prismatic micrometers. Types of MTI, MPI, MSI. Methods and means of verification

MI 41-88: State system for ensuring the uniformity of measurements. Method for measuring surface roughness parameters according to GOST 2789-73 by method of using profile devices

MI 424-84: State system for ensuring uniformity of measurements. Shtangenreissmass arrow model BV-6226. Methods and means of verification

MI 481-84: Guidelines. Dial Indicator with Damping Device. Model ICh 10MD. Methods and means of verification

MI 516-84: Methodical instructions. Caliper of the traveling PShV type. Verification Method

MI 524-89: Recommendation. GSE. Stangenzubomery with nonius. Types of SHZN-18, SHZN-40. Method of verification

MI 694-85: State system for ensuring uniformity of measurements. The indicator of hour type with the price of division of 0,01 mm of the I450 model. Method of verification

MI 709-85: Methodical instructions. GSI. Model of height step-by-step with digital readout model BV-6151. Verification Method

MI 782-85: Guidelines. State system for ensuring uniformity of measurements. Micrometers with a division value of 0.01 mm. Method of verification

MI 82-76: State system for ensuring uniformity of measurements. The method of calibration of the exemplary rings of the 4th category for the caliper with the cost of division of 0.001 and 0.002 mm

MI 82-87: Rings, standard, of 4th category for bore gages with a scale division of 0.001 and 0.002 mm

MI 905-85: State system for ensuring uniformity of measurements. Micrometer pipe. Type MT 15-M. Verification Method

MI 936-85: Guidelines. State system for ensuring uniformity of measurements. Measures the length of the stroke model of the 3rd category (meters-comparators). Method of verification

MI 954-85: Methodical instructions. Indicators are multi-turn. Models 05205, 05305. Verification procedure

MI 965-85: State system for ensuring uniformity of measurements. Shtangenglubinome arrow models BV-6232. Method of verification

OST 108.004.108-80: Welded connections and depositing of nuclear power plants equipment. Ultrasound testing methods

OST 108.033.01-86: mechanical stokers. Technical conditions.

OST 13-86-80: Metrological support of furniture production. General requirements for calibration data base and instruments. Gauges monitoring.

OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.

RD 22-205-88: Ultrasonic flaw detection of welded joints of lifting machines. Main provisions.

RD 31.52.08-81: Caprolon steering gear bearings. Technological requirements for the manufacture and installation of ship repair

RD 34.17.415-96: Instructions for ultrasonic inspection of power equipment fasteners.

RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment

RD 34.35.618: Explosionproof Indicating Electrical Contact Pressure Gauges Type VE-16rb. Guide to Overhaul

RD 39-2-621-81: Test procedure for threaded and smooth plug gauges and ring gauges to control connections with tapered trapezoidal threads

RK 34-38-025-87: Guide to Overhaul of Indicating Pressure Gauges for Precise Measurements Type MTI

RST RSFSR 457-79: Harmonics wind and labial. General technical conditions

RST RSFSR 516-88: Eaves metal. Technical conditions

RST RSFSR 656-81: Apparatus for processing vegetables and fruits. Technical conditions

RST RSFSR 91-78: Percussion musical instruments. General technical requirements

RST RSFSR 92-83: Musical wind instruments. General technical conditions

RTM 16.689.169-75: Explosion-proof and mine electrical equipment repair

TU 035-178-86: Saws disk for pieces of pipes and bent profiles. Technical conditions for the experimental batch

TU 102-377-84: A set of elements for mobile (inventory) collapsible buildings of the structural construction system SKZ-M. Group specifications

TU 102-390-85: Vibrational low-frequency platforms with spatial oscillations of the HSV type

TU 102-425-86: A set of structures for the building of crane (crane) with structures frame production span of 12 and 18M

TU 102-533-89: A set of structures on a building without a crane with arched span of 12, 15 and 18 m

TU 1303-002-08620133-01-TU-LU: Electrowelded pipes made of carbon and low alloy steels for steam and hot water pipelines

TU 2-034-228-87: Threaded and Radius Patterns

TU 24-09.411-82: Special electric bridge cranes

TU 24-09-613-84: Electric overhead traveling cranes with a lifting capacity of 5 tons of lightweight construction with electric hoist

TU 26-02-975-84: Tips to sleeves for loading and loading risers

TU 34 10.10055-97: Vertical cylindrical steel tanks. Technical conditions

TU 34-38-20092-94: High pressure surface heaters for steam turbine regeneration systems. Technical conditions for major repairs

TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs

TU 34-38-20310-96: Centrifugal multistage sectional pumps CNS 180-85 ... 425. Technical conditions for repair

TU 34-38-20409-94: Pulse-safety devices Chekhov factory of power engineering. General technical conditions for major repairs

TU 35-1385-81: Span metal railway buildings with riding on top 18.2 - 33.6 m

TU 35-1757-87: Buildings spanning railway bridges with riding on top on the ballast of box section Lp = 33.6 m; 45.0 m. Specifications

TU 3615-044-00220302-02: Cylindrical horizontal reservoirs for liquid hydrocarbonic propane and butane gases

TU 36-2009-77: Steel structures of steel vertical cylindrical tanks with a capacity from 100 to 20,000 m3 for the storage of oil and oil products. Technical conditions

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Square steel tubes. Range
Language: English
Price: $102.00
imgalt
Design norms for antiseismic atomic power stations
Language: English
Price: $196.02
imgalt
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English
Price: $1,514.00
imgalt
Electric locomotives. General technical requirements
Language: English
Price: $282.00
imgalt
Pipeline valves. Leakage rates of valves
Language: English
Price: $499.00
imgalt
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English
Price: $334.00
imgalt
Locomotive and motor rolling stock. Requirements of fire safety
Language: English
Price: $169.00
imgalt
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English
Price: $139.00
imgalt
Oil. General specifications
Language: English
Price: $132.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!