SP 260.1325800.2023
СП 260.1325800.2023
|
|
Thin-walled steel structures made of cold-formed galvanized profiles and corrugated sheets. Design rules
Конструкции стальные тонкостенные из холодногнутых оцинкованных профилей и гофрированных листов. Правила проектирования
Status: Status information is available in the commercial version of NormaCS
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of construction and housing and communal services of the Russian Federation,
12/28/2023
SKU: RUSS441009
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
K.53 Metal structures »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.70 Steel profiles »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.10 Metal constructions »
As a Replacement Of:
SP 260.1325800.2016: Cold-formed thin-walled steel profile and galvanized corrugated plate constructions. Design rules
The Document References:
Amendment 3: Amendment to SP 16.13330.2017 "SNiP II-23-81* Steel Structures"
Amendment 3: Amendment to SP 4.13130.2013 Fire protection systems. Restriction of fire propagation at the objects of protection. Requirements for volume planning and structural solutions
Amendment 4: Amendment to SP 43.13330.2012 SNiP 2.09.03-85 Structures of industrial enterprises
Amendment 5: Amendment to SP 20.13330.2016 SNiP 2.01.07-85* Loads and impacts
Amendment 5: Amendment to SP 22.13330.2016 SNiP 2.02.01-83* Foundations of Buildings and Structures
Amendment 5: Amendment to SP 16.13330.2017 "SNiP II-23-81* Steel Structures"
Federal Law 184-FZ: About technical regulation
GOST 14918-2020: Hot-dip galvanized sheet metal. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 21780-2006: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 23118-2019: Steel building structures. General specifications
GOST 24045-2016: Steel sheet clad-formed sections with trapezoidal corrugations for building specifications
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 27772-2021: Rolled steel for building steel structures. General technical conditions
GOST 34180-2017: Steel cold and cold rolled hot-galvanized sheet with polimer coating, prepainted by the continuous coil-coating process. Specifications
GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions
GOST 5927-70: Hexagon nuts (high precision). Construction and dimensions
GOST 7796-70: Hexagon reduced head bolts product grade B. Construction and dimensions
GOST 7798-70: Hexagon bolts, product grade B. construction and dimensions
GOST 7805-70: Hexagon bolts, product grade A. Construction and dimensions
GOST 9.039-74: Unified system of corrosion and ageing protection. Corrosive aggressiveness of atmosphere
GOST 9.401-2018: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST ISO 4032-2014: Hex Nuts, normal (type 1). Precision classes A and B
GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch
GOST R 27.102-2021: Reliability in engineering. Reliability of a facility. Terms and definitions.
GOST R 58774-2019: The external walls are frame-sheathed self-supporting and non-bearing with a frame made of cold-rolled steel galvanized profiles. General specifications
GOST R 58942-2020: A system for ensuring the accuracy of geometric parameters in construction. Technological tolerances
GOST R 59905-2021: Self-drilling screws for steel construction. General specifications.
GOST R ISO 15977-2017: Open end blind rivets with break pull mandrel and protruding head (aluminium alloy body and a steel mandrel)
GOST R ISO 15979-2017: Open end blind rivets with break pull mandrel and protruding head (steel body and steel mandrel)
GOST R ISO 15980-2017: Open end blind rivets with break pull mandrel and countersunk head (steel body and steel mandrel)
GOST R ISO 8765-2013: Hexagon head bolts with metric fine pitch thread. Product grades A and B
GOST R ISO/IEC 12207-2010: Information technology. System and software engineering. Software life cycle processes
GOST R ISO/IEC 14764-2002: Information technology. Software maintenance
SP 131.13330.2020: Construction climatology SNiP 23-01-99 *
SP 14.13330.2018: Seismic building design code
SP 16.13330.2017: Steel structures
SP 2.13130.2020: Fire protection systems. Ensuring fire resistance of objects of protection
SP 20.13330.2016: Loads and actions
SP 260.1325800.2016: Cold-formed thin-walled steel profile and galvanized corrugated plate constructions. Design rules
SP 28.13330.2017: Protection against corrosion of construction
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
The Document is Referenced By:
List: List of regulatory legal acts, regulatory and methodological documents used in the preparation of test tasks for certification of experts in the field of industrial safety
List: List of conditions of typical situational tasks for certification of experts in the field of industrial safety
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.