GOST 6697-83
ГОСТ 6697-83
|
|
Power supply systems, sources, converters and receivers of electric alternating current energy rated frequencies from 0,1 to 10000 Hz and tolerances
Системы электроснабжения, источники, преобразователи и приемники электрической энергии переменного тока. Номинальные частоты от 0,1 до 10000 Гц и допускаемые отклонения
Status: Valid - Supersedes
The standard establishes the ranges of nominal values and frequency tolerances of power supply systems, sources, transducers and electrical energy receivers directly connected to them, operating in the steady state at fixed frequencies in the range from 0.1 to 10,000 Hz.
Стандарт устанавливает ряды номинальных значений и допускаемые отклонения частот систем электроснабжения, источников, преобразователей и непосредственно присоединенных к ним приемников электрической энергии, рабатающих в установившемся режиме на фиксированных частотах в диапазоне от 0,1 до 10000 Гц.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
5/3/1983
SKU: RUSS47472
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.020 Electrical engineering in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.020 Electrical engineering in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E0 General rules and regulations for electrical and heat engineering »
E02 Norms of calculation and design »
National Standards for OKSTU »
ELECTRICITY AND HEAT »
Electricity »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
Semiconductor power converters up to 5 kW »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
Chemical, physical current sources, electrochemical and thermoelectric generators »
As a Replacement Of:
GOST 6697-75: Power supply systems, sources, converters and receivers of electric alternating current energy. Rated frequencies from 50 to 1000 Hz and tolerances
The Document is Referenced By:
GOST 10223-82: Batch-weighing dispensers of discrete action, balance and batch-weighing dispensers of continuous action
GOST 10223-97: Weighing batchers of periodic operation
GOST 12.2.009-99: Metal-working machines. General safety requirements
GOST 12.2.017.4-2003: Sheet-bending presses. Safety requirements
GOST 12.2.096-83: Standard system of labour safety. Steam boilers with pressure up to 0.07 MPa. Safety requirements
GOST 12.2.113-2006: Crank presses. Safety requirements
GOST 12.2.116-2004: Three- and four-roller plate-bending machines. Safety requirements
GOST 12.2.118-2006: Shears. Safety requirements
GOST 12139-84: Electric rotary machines. Ranges of rated output, voltages and frequencies
GOST 12434-83: Low-voltage switching devices. General specifications
GOST 14868-97: Electric motor frequency convertors with rated power up to 200 kW and frequency to 20000 Hz. Basic parameters
GOST 16308-84: Thermal current relays. General specifications
GOST 16708-84: Rotary switches. General specifications
GOST 18142-80: Electricity converters, static, semiconductor, ac to dc (rectifiers). General specifications
GOST 19132-86: Contact clips for mounting in blocks
GOST 21128-83: Power supply systems, nets, sources, converters and receivers of electric energy. Rated voltages to 1000 V
GOST 2327-89: Low-voltage switches, switch-disconnectors. General technical specifications
GOST 23366-78: Series of rated voltages of direct and alternating current
GOST 23624-79: Metering laboratory current transformers
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 24376-91: Semiconductor inverters
GOST 24607-88: Semiconductor frequency converters
GOST 24875-88: Small power electric machines. Tachogenerators. General specifications
GOST 25804.4-83: Atomic power station technological processes control system equipment. General design-constructional requirements
GOST 25864-83: Force measuring standard machines of 2 grade. General technical requirements
GOST 25953-83: Electric energy semiconductor converters of 5 kV·A power and above. Parameters
GOST 26282-84: Semiconductor power converters ranging to 5 kV·A. Parameters
GOST 27632-88: Accelerators of charged particles of industrial application
GOST 27735-94: Domestic scales
GOST 27803-88: Adjustable electrical drives for machine tools building and robotechnics. General technical requirements
GOST 28167-89: Semiconductor alternating voltage converters. General specifications
GOST 28171-89: Gambling machines
GOST 29329-92: Balance for static weightings
GOST 30011.5-93: Low-voltage switchgear and control gear
GOST 30124-94: Weight meters and weighing batchers of continuous action
GOST 30414-96: Weighbridges for weighing of vehicles in motion. General technical requirements
GOST 31542-2012: Automatic and semi-automatic metal forming machines. Safety requirements
GOST 34627-2019: Power semiconductor converters for diesel rolling stock. General parameters and general requirements
GOST 6827-76: Electrical equipment and receivers of electric energy. Series of nominal currents
GOST 721-77: Power supply systems, networks, sources,converters and receivers of electric energy. Rated voltages above 1000 V
GOST 8039-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5. Special requirements for phase meters, power factor meters and synchroscopes
GOST R 50030.3-99: Low -voltage switchgear and controlgear. Pat 3. Switchers, disconnectors, switch-disconnectors and fure-combination units
GOST R 50030.5.1-2005: Low-voltage switchgear and controlgear. Part 5. Control circuit devices and switching elements. Section 1. Electromechanical control circuit devices
GOST R 50030.5.1-99: Low-voltage switchgear and control gear. Part 5.1. Control circuit devices and switching elements. Electromechanical control circuit devices
GOST R 51918-2002: The equipment for care of coordinates through the vertical mine. General technical requirements and test methods
GOST R 52915-2008: Automatic and semi-automatic metalforming machines. Safety requirements
GOST R 54431-2011: Metal-working machines. General safety requirements
GOST R 58786-2019: Electrical equipment for nuclear power plants. General technical requirements
GOST R 58874-2020: Ship power systems. Nominal voltages and frequencies
PNST 164-2016: Electric equipment for nuclear power plants. General technical requirements
RD-APK 1.10.07.04-17: Guidelines for the technological design of veterinary and sanitary utilization plants
RD-APK 1.10.07.06-08: Guidelines for the technological design of veterinary and sanitary utilization plants
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
