GOST 9150-81
ГОСТ 9150-81
|
|
Basic norms of interchangeability. Metric screw thread. Profile
Основные нормы взаимозаменяемости. Резьба метрическая. Профиль
Status: Not effective - Superseded. IUS 9-2003
The standard applies to metric threads and establishes the nominal profile and dimensions of its elements.
Стандарт распространяется на метрические резьбы и устанавливает номинальный профиль и размеры его элементов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
4/23/1981
SKU: RUSS47762
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
21 Mechanical systems and general purpose devices »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.040 Screw threads »
21.040.10 Metric threads »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.040 Screw Threads »
21.040.10 Metric threads »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G13 Threads »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
General rules and regulations for mechanical engineering »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Detachable connections (threads, keys, splines, etc.) »
The Document is Replaced With:
GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile
The Document is Referenced By:
GOST 10272-77: Double entry centrifugal pumps. Specification
GOST 10494-80: Studs for flanged connections with lens-shaped seals for pn - 10-100 MPa (100-1000 kgf/sq sm). Technical requirements
GOST 10602-94: Hexagon head bolts with thread diameter over 48 mm. Product grade B. Specifications
GOST 10605-94: Hexagon nuts with thread diameter over 48 mm. Product grade B. Specifications
GOST 10944-75: Control valves of the heating installations for building water heating systems
GOST 11200-75: Objectives and body-tubes of the microscopes. Attaching dimensions
GOST 11447-80: Locking studs for Py 10-100 MPa (100-1000 kgf/cm2). Technical requirements
GOST 11709-81: Metric screw threads in the range 1-180 mm diameters for the parts in plastics. Profile, basic dimensions and tolerances
GOST 11779-74: Moulding combined tamper and rammer. Design
GOST 12247-80: Large seamless steel gas cylinders for operating pressure of 31,4 and 39,2 MPa (320 and 400 kgf/cm sq.). Specifications
GOST 12393-77: Fittings for overhead system of electric railways. General specifications
GOST 14213-89: Logging cable tips, sonde heads and logging tools heads. Types, main parameters, dimensions and technical requirements
GOST 15948-76: Thread-forming pieces for moulding metric thread in plastic articles. Size calculation
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 16226-81: End double-tooth mill threaded shank for machining light alloys. Design and dimensions
GOST 16345-70: Universal single-rolled devices for a surface hardening of machine parts by rolling. Types. Technical requirements
GOST 16438-70: Sand and metal moulds for making of fluidity of metals tests
GOST 16675-80: Punches, female dies, holders, liner plates and keys. Specifications
GOST 16967-81: Basic norms of interchangeability. Metric thread for instrument-making industry. Diameters and pitches
GOST 17019-78: Fixing parts for pipelines and cables. Specifications
GOST 19125-90: Fittings of connections for airborne instruments. Design and dimensions
GOST 19191-73: Rigging screws with automatic stopping. Specifications
GOST 19257-73: Holes for threading metric thread. Diameters
GOST 19513-74: Faced chill moulds. Loose pins for gated patterns. Construction and dimensions
GOST 19514-74: Faced chill moulds. Guide pins for gated patterns. Construction and dimensions
GOST 19515-74: Faced chill moulds. Centring bushing for gated patterns. Construction and dimensions
GOST 19516-74: Faced chill moulds. Guide bushe for gated patterns. Construction and dimensions
GOST 19646-74: Moulding hollow vibration-damping shoe. Design
GOST 19859-74: Plates for sheet stamping cupping dies (blanks). Specifications
GOST 19964-74: Support plate for wax-pattern dies with max 190 mm diameter cylinder matrices. Design and dimensions
GOST 19965-74: Support plate for wax-pattern dies with min 190 mm diameter cylinder matrices. Design and dimensions
GOST 19966-74: Support plate for wax-pattern dies with rectangular matrices. Design and dimensions
GOST 19967-74: Movable retainer rings for wax-pattern dies with max 190 mm diameter cylinder matrices. Design and dimensions
GOST 19968-74: Movable retainer rings for wax-pattern dies with min 190 mm diameter cylinder matrices. Design and dimensions
GOST 19969-74: Movable retainer rings for wax-pattern dies with rectangular matrices. Design and dimensions
GOST 19970-74: Stationary retainer rings for wax-pattern dies with max 190 mm diameter cylinder matrices. Design and dimensions
GOST 19971-74: Stationary retainer rings for wax-pattern dies with min 190 mm diameter cylinder matrices. Design and dimensions
GOST 19972-74: Stationary retainer rings for wax-pattern dies with rectangular matrices. Design and dimensions
GOST 19976-74: Ejector plate-blanks for wax-pattern dies with max 190 mm diameter cylinder matrices. Design and dimensions
GOST 19977-74: Ejector plate-blanks for wax-pattern dies with min 190 mm diameter cylinder matrices. Design and dimensions
GOST 19978-74: Intermediate plate-blanks for wax-pattern dies with rectangular matrices. Design and dimensions
GOST 19982-74: Base-blanks for wax-pattern dies with max 190 mm diameter cylinder matrices. Design and dimensions
GOST 19983-74: Base-blanks for wax-pattern dies with min 190 mm diameter cylinder matrices. Design and dimensions
GOST 19984-74: Base-blank for wax-pattern dies with rectangular matrices. Design and dimensions
GOST 19996-74: Put-in nipple for wax-pattern dies. Design and dimensions
GOST 20062-96: Tractor seat
GOST 20849-94: Heating convectors. Specifications
GOST 21087-75: Metal casting patterns. Technical requirements
GOST 21088-75: Pushers with threaded shank for chill moulds with fluid cooling. Construction and dimensions
GOST 21090-75: Connecting pieces for chill moulds with fluid cooling. Construction and dimensions
GOST 21295-75: Adjustable ejectors for heated core boxes. Design and dimensions
GOST 21296-75: Centring bushes with screw hole for heated core boxes. Design and dimensions
GOST 21297-75: Guide bushes with screw hole for heated core boxes. Design and dimensions
GOST 21298-75: Pins with screw hole for heated core boxes. Design and dimensions
GOST 21299-75: Pins with screw tail for heated core boxes. Design and dimensions
GOST 21300-75: Centring joining with clamps for heated core boxes. Design and dimensions
GOST 21301-75: Guide joining with clamp for heated core boxes. Design and dimensions
GOST 21459-82: Removable guides for sheet stamping dies. Construction and dimensions
GOST 21993-76: Safety lubricating valves. Specification
GOST 22065-76: Plate-blanks of injection moulds. Design and dimensions
GOST 22066-76: Clamping plate-blanks of injection moulds. Design and dimensions
GOST 22069-76: Cross-forming supporting plate-blanks of injection moulds. Design and dimensions
GOST 22070-76: Rectangular supporting plate-blanks of injection moulds. Design and dimensions
GOST 22072-76: Guide pins of injection moulds. Design and dimensions
GOST 22073-76: Guide bushings of injection moulds. Design and dimensions
GOST 22079-76: Shanks of injection moulds. Design and dimensions
GOST 22080-76: Shouldered shanks of injection moulds. Design and dimensions
GOST 22081-76: Flange-blanks of injection moulds. Design and dimensions
GOST 22329-93: Screw strainers for wooden split core boxes. Design
GOST 22333-93: Bolt lifting screw for wooden cast patterns. Design
GOST 22474-77: Pins for fixing and securing the patterns on master pattern plates. Design and dimensions
GOST 22475-77: Bolt fixtures for master pattern plates. Design and dimensions
GOST 22790-83: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2). General specifications
GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)
GOST 22908-78: Dresser diamonds. Specifications
GOST 22965-78: Pins for moulding boxes. Construction and dimensions
GOST 23212-78: Units of versatile press tools for clipping. Specifications
GOST 23476-79: Tramway and trolleybus overhead trolley wire supporting devices. General specifications
GOST 24351-80: Three- and two-jaw lathe self-centring chucks with wedge and lever-type clamps. Basic dimensions
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 24706-81: Basic norms of interchangeability. Metric thread for instrument-making industry. Basic dimensions
GOST 24997-81: Gauges for metric threads. Tolerances
GOST 25229-82: Basic norms of interchangeability. Metric taper screw thread
GOST 26879-88: Agricultural tractors. Safety belts. Specification and test methods
GOST 2832-77: Adjusting rings with screw fastening. Dimensions
GOST 28919-91: Flange connections of wellhead equipment. Types, basic parameters and dimensions
GOST 31.0151.01-90: Universal and special-purpose setters
GOST 3124-77: Hose connections for flexible hoses of monitors. Specifications
GOST 31835-2012: Well sucker-rod pumps. General technical requirements
GOST 3362-75: Still picture and movie picture cameras. Tripod connection. Coupling dimensions
GOST 3933-75: Still photo and movie camera lenses. Joined dimensions for accessories
GOST 4608-81: Basic norms of interchangeability. Metric screw thread. Interference fits
GOST 4860.1-83: Glands for for electric cables and wires
GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications
GOST 5976-73: Centrifugal fans, general purpose
GOST 6911-71: Dual-line feeders for centralized lubricating systems. Specifications
GOST 8483-81: Fishing taps and overshots for prospecting
GOST 8530-83: Ball and roller bearings. Nuts, round, slotted for fastening and connecting bushings. Specification
GOST 8530-90: Rolling bearings. Locknuts, washers and cramps for tapered adaptive and withdrawal sleeves. Specifications
GOST 8615-89: Universal dividing heads
GOST 8724-81: Basic norms of interchangeability. Metric screw thread. Diameters and pitches
GOST 9000-81: Basic norms of interchangeability. Metric screw thread for diameters less than 1 mm. Tolerances
GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile
GOST 9321-73: Rollers. Specifications
GOST 9400-81: Threaded connecting ends for valves, fittings and pipes with tens - shaped seals for pn20-100 mpa (200-1000 kgf/cm2) dimensions
GOST 9520-73: Vertical fine boring machines. Basic dimensions
GOST 9731-79: Large capacity seamless steel gas-cylinders for operation pressure 4.5 MPa (250 kgf / cm2)
GOST R 50403-92: Countersunk head screws. Product grades A and B. Specifications
GOST R 50405-92: Slotted cheese head screws. Product grades A and B. Specifications
GOST R 51753-2001: High pressure cylinders for the compressed natural gas as a fuel for automotive vehicles. General specifications
GOST R 51896-2002: Well sucker-rod pumps. General technical requirements
GOST R 53258-2009: Fire equipment. The small size cylinders for apparatuses breathing and self-contained escape with compressed air. General technical requirements. Test methods
OST 24.090.39-78: Shell stacker cranes. Specifications.
OST 24.090.39-83: Shell stacker cranes. General specifications.
OST 24.191.04: Single-end hooks. Types and dimensions
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26.260.472-2000: devices for installation of pressure gauges and pressure selection. General technical requirements.
OST 26-04-1035-74: Assembling units and fastening details of cold pipelines with a diameter from 100 to 1020 mm. Design and dimensions.
OST 34 016-73: Self-tapping bolts. Design and dimensions. Technical requirements
OST 34-10-739-93: Threaded rods with coupling. Design and dimensions.
OST 34-13-016-88: Self-tapping bolts. Design and dimensions. Technical requirements
OST 35-02-72: High-strength bolts, nuts and washers for them.
OST 37.001.137-83*: Self-locking hex nuts, crimped at the end. Construction and dimensions
PB 03-108-96: Process pipeline design and safe operation rules
RD 26.260.007-92: Pipelines and pipeline parts for pressure of 250 MPa (2500 kgf/cm2) of polyethylene production. Basic technical requirements, certification, operation and repair
SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation
SP 53-101-98: Manufacturing and quality control of steel structures for construction
TU 14-4-87-72: High-strength thermally treated bolts and nuts with a diameter of M16 - M27 for building steel structures. Technical conditions
TU 24-09.411-82: Special electric bridge cranes
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.