GOST 8693-80

ГОСТ 8693-80

Metal pipes. Method of flange testing

Трубы металлические. Метод испытания на бортование

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)

The standard establishes a test method for boring metal seamless welded pipes with an outer diameter D up to 160 mm inclusive with a wall thickness of not more than 9.0 mm at a temperature of 20 15

Стандарт устанавливает метод испытания на бортование металлических бесшовных сварных трубс наружным диаметром D до 160 мм включительно с толщиной стенки не более 9,0 мм при температуре 20 +15/-10°С.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 4

Approved: USSR State Committee for Standards, 3/28/1980

SKU: RUSS47869

Price: $42.68




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.10 Cast iron and steel pipes »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.10 Cast iron and steel pipes »

ISO classifier » 77 METALLURGY » 77.040 Metal Testing » 77.040.10 Mechanical testing of metals »

National standards » 77 METALLURGY » 77.040 Metal Testing » 77.040.10 Mechanical testing of metals »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V6 Pipes metal and pipe products » V69 Test methods. Packaging. Marking »


As a Replacement Of:

GOST 8693-58: Tubes. Method of flange testing

The Document References:

GOST 2.308-79: Unified system for design documentation. Representation of limits of forms and surface lay-out on drawings

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 6636-69: Standard linear dimensions

GOST 8908-81: Basic norms of interchangeability. Standard angles and angle tolerances

GOST 9013-59: Metals. Method of measuring Rockwell hardness

The Document is Referenced By:

GOST 10092-75: Cupro-nickel tubes for heat-exchanging apparatus. Specifications

GOST 10705-80: Electrically welded steel tubes. Specifications

GOST 10707-80: Steel cold shaped electrically welded tubes technical conditions

GOST 11068-81: Electric-welded pipes from corrosion-resistant steel

GOST 12132-66: Electrowelded and seamless steel tubes for automotive and bicycle industries. Specifications

GOST 17217-2018: Tubes of copper-nickel alloy МНЖ 5-1. Specifications

GOST 17217-79: Copper-nickel alloyed tubes grade Mnzh 5-1

GOST 24890-81: Welded titanium and titanium alloys pipes

GOST 30432-96: Metal tubes. Selection of samples, tube stocks and specimens for mechanic and technological tests

GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications

GOST 32598-2013: Tubes copper round for water and gas. Specifications

GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.

GOST 33228-2015: Steel welded pipes for general purposes. Specifications

GOST 617-90: Copper tubes. Specifications

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements

GOST R 52318-2005: Round copper tubes for water and gas. Specifications

GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications

GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications

GOST R 54568-2011: Tubes from alloy МНЖ5-1. Specifications

GOST R 54929-2012: Steel welded pipes for general purposes. Specifications

GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements

SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel

GOST 8733-87: Steel seamless cold-deformed and heat-deformed pipes. Technical specifications

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Construction in seismic regions of Ukraine
Language: English
Price: $5,909.85
Aviation turbine fuels and kerosine. Determination of smoke point
Language: English
Price: $270.63
Distillate fuels. Determination of free water and particulate contamination by visual inspection method
Language: English
Price: $165.87
Aviation gas turbine fuels. Method for determining thermal oxidative stability
Language: English
Price: $473.36
Hazard classification of chemical products. General requirements
Language: English
Price: $356.40
Warning labeling of chemical products. General requirements
Language: English
Price: $613.80
Safety data sheet for chemical products. General requirements
Language: English
Price: $121.77
Hoisting cranes. Rules and test methods
Language: English
Price: $393.39
Aviation turbine fuels. Determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
Language: English
Price: $309.43
Aviation turbine fuel. Determination of acidity
Language: English
Price: $218.25
Petroleum products. Determination of color by Saybolt chromometer
Language: English
Price: $218.25
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Aviation fuels. Calculating net calorific value
Language: English
Price: $179.45

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!