GOST 12.1.040-83
ГОСТ 12.1.040-83
|
|
Occupational safety standards system. Laser safety. General
Система стандартов безопасности труда. Лазерная безопасность. Общие положения
Status: Effective
The standard establishes: the classification of hazardous and harmful production factors arising from the operation of lasers (laser systems), depending on the degree of danger of the generated radiation; requirements and standards for the types of hazardous and harmful production factors and the maximum permissible values of their parameters; methods of control of normalized parameters of hazardous and harmful production factors; requirements for the construction and presentation of standards for laser safety; general requirements for collective protection (hereinafter - protection) against dangerous and harmful production factors. The standard does not apply to personal protective equipment against laser radiation.
Стандарт устанавливает: классификацию опасных и вредных производственных факторов, возникающих при эксплуатации лазеров (лазерных установок), в зависимости от степени опасности генерируемого излучения; требования и нормы по видам опасных и вредных производственных факторов и предельно допустимые значения их параметров; методы контроля нормируемых параметров опасных и вредных производственных факторов; требования к построению и изложению стандартов по лазерной безопасности; общие требования к средствам коллективной защиты (в дальнейшем - средствам защиты) от опасных и вредных производственных факторов. Стандарт не распространяется на средства индивидуальной защиты от лазерного излучения.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
1/31/1983
SKU: RUSS48490
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.280 Protection against radiation »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.280 Protection against radiation »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Occupational safety standards system (SSBT). Scientific organization of labor. Safety precautions. Sanitation and occupational health »
The Document References:
GOST 12.0.001-82: Occupational safety standards system. Basic rules
GOST 12.0.002-80: Occupational safety standards system. Terms and definitions
GOST 12.0.003-74: Dangerous and harmful production effects. Classification
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.006-84: Occupational safety standards system. Electromagnetic fields of radio frequencies. Permissible levels at work-places and requirements for control
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.1.029-80: Means and methods of defense from noise. Classification
GOST 12.1.031-81: Occupational safety standards system. Lasers. Methods of dosimetrical control of laser radiation
GOST 12.1.050-86: Occupational safety standards system. Methods of noise measurement at work-places
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.012-83: Occupational safety standards system. Vibration. Means for measurement and control of vibration in site. Technical requirements
GOST 12.4.026-76: Signal colors and safety signs
GOST 12.4.040-78: Industrial equipment controls
GOST 12.4.120-83: Occupational safety standards system. Means of the collective protection against ionizing radiation. General technical requirements
GOST 12.4.123-83: Occupational safety standard system. Means of collective protection against infra-red radiation. General technical requirements
GOST 12.4.125-83: Safety equipment for collective protection of personnel against exposure of mechanical factors
GOST 26568-85: Vibration. Methods and means for protection Classification.
NRB 99: Radiation Safety Standards
The Document is Referenced By:
GOST 12.1.031-81: Occupational safety standards system. Lasers. Methods of dosimetrical control of laser radiation
GOST 12.2.231-2012: Occupational safety standards system. Polygraphic equipment. Safety requirements and test methods
GOST 23543-88: Geodesic instruments
GOST 24428-80: Gas lasers. General specifications
GOST 31489-2012: Garage equipment. Safety requirements and methods of inspection
GOST 31581-2012: Laser safety. General safety requirements for development and operation of laser products
GOST 31817.1.1-2012: Alarm systems. Part 1. General requirements. Section 1. General
GOST 8.591-2009: State system for ensuring the uniformity of measurements. Nanometre range relief measure with trapezoidal profile of elements. Verification method
GOST R 12.1.031-2010: Occupational safety standards system. Lasers. Methods of dosimetric control of laser radiation
GOST R 12.2.133-97: Occupational safety standards system. Polygraphic equipment. Safety requirements and test methods
GOST R 50723-94: Laser safety. General requirements for development and operation the laser products
GOST R 50775-95: Alarm systems. Part 1. General requirements. Section 1. General
GOST R 50909-96: Visual observation instruments. Safety requirements and test methods
GOST R 51036-97: Electrooptical elements. Methods for measurement of electrooptical parameters
GOST R 51101-2012: Metalworking and woodworking machines. Testing methods of compliance with safety requirements
GOST R 51151-98: Garage equipment. Safety requirements and methods of inspection
GOST R 51558-2000: Television systems of security. General technical requirements and test methods
GOST R 51558-2014: Systems and components of Video surveillance for security applications. Classification. General requirements. Test procedures
GOST R 51751-2001: Non-destructive testing. Non-destructive testing for evaluation of critical high-loaded elements when exposed to significant temperature and forces. General requirements for guidance of the selection of methods
GOST R 51846-2001: Solid-state lasers and solid-state laser heads for wide application devices. General specifications
GOST R 52434-2005: Active infra-red detectors. General technical requirements and test methods
GOST R 52891-2007: Control of residual technological stresses by laser interferometrical method. General requirements
GOST R 53704-2009: Complex and integrated security systems. General technical requirements
GOST R 54906-2012: Complex security systems. Environmental security and ecological safety guaranteed design. General technical requirements
GOST R 56242-2014: Inland water transport. Replacement laser beacons within the harbours, on the approach to them and a plot of waterway with cramped conditions navigation. General
GOST R 57602-2017: Fibre reinforced thermosetting plastic pipes and pipelines. Nondestructive testing methods with exploiting
GOST R 58432-2019: Laser hardening of mechanical engineering parts. Technological process
GOST R 8.629-2007: State system for ensuring the uniformity of measurements. Nanometre range relief measures with trapezoidal profile of elements. Methods for verification
GOST R 8.644-2008: State system for ensuring the uniformity of measurements. Nanometre range relief measures with trapezoidal profile of elements. Methods for calibration
GOST R 8.705-2010: State system for ensuring the uniformity of measurements. Embedded and external photometers for high-energy laser medical apparatus. Verification procedure
GOST R 8.706-2010: State system for ensuring the uniformity of measurements. Embedded and external photometers for laser therapeutic apparatus. Method of verification
GOST R 8.720-2010: State system for ensuring the uniformity of measurements. Optical power meters, optical radiation sources, return loss meters and optical testers for fibre-optical transfer systems. Verification procedure
GOST R 8.721-2010: State system for ensuring the uniformity of measurements. Medical biofotometrs. Verification procedure
GOST R 8.794-2012: State system for ensuring the uniformity of measurements. Ground laser scanners. Verification procedure
Indication O-1515u: Recommendations for planning labor protection measures in railway transport
Manual: Manual for impulse and low consumption fire extinguishing systems
MI 2408-97: Recommendation. State system for ensuring uniformity of measurements. The equipment of users of space navigation systems is geodesic. Method of verification
MI 2728-2002: State system for ensuring uniformity of measurements. The list of regulatory documents on security requirements. The order of their application in the normative documents of the ICE
MI LI.INT-13.01-2018: The method of measuring the parameters of laser radiation for the purpose of a special assessment of working conditions
MIGK 43-05: Satellite geodetic equipment. Methods and means of verification
MP 039.M7-19: State system for ensuring uniformity of measurements. Photodiode radiation receivers PDP. Verification Method
MP 040.M4-19: State system for ensuring uniformity of measurements. Spectro2guide spectrophotometers, spectro2guide d: 8 degrees, spectro2guide 45 degrees, c: 0 degrees. Verification method
MU 4428-87: Guidelines for improving the state preventive sanitary inspection of the design of workshops and welding stations, the development of technological processes and equipment for welding production
ONTP 11-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises. Workshops for the production of tools and tooling (completion ONTP-11-93)
ONTP 16-86: All-Union standards for technological design of thermal areas, workshops, production facilities of enterprises of mechanical engineering, instrument engineering and metalworking
ONTP 1-85/Minstrojdormash: All-Union norms of technological design of engineering enterprises, instrument making metallo-processing. Metalwork shops (Stocking and welding production)
OST 36-100.3.13-85: Labour safety standard system. Processing equipment installation. General safety requirements.
OST 68-12.0.01-02: Sectoral system of standards for labor safety. Main provisions
PB 06-227-98: Safety regulations for auxiliary workshops of mining enterprises
POT R M-005-97: Intersectoral labor protection rules for heat treatment of metals
POT R M-019-2001: Intersectoral rules for labor protection in the production of acetylene, oxygen, the process of spraying and gas-plasma processing of metals
POT R M-022-2002: Intersectoral rules on labor protection during soldering and tinning of products
POT R O 00030171: Labor protection rules during the operation of navigable hydraulic structures
POT R O 29-001-93: Labor protection regulations for printing companies
POT R O-45-007-96: Labor protection rules when working at telephone exchanges and telegraphs
R 50.2.023-2002: National System for Standardization of Measurements. Levels. Verification Technique
R 50.2.024-2002: National System for Standardization of Measurements. Theodolites and Other Geodetic Survey Instruments. Verification Methods
R 50.2.069-2009: State systems for ensuring the uniformity of measurements. Optical spectrum analyzers in fibre optical transmission systems. Verifacation procedure
R 50.2.070-2009: State systems for ensuring the uniformity of measurements. Attenuators in fibre optical transmission systems. Verifacation procedure
R 50.2.071-2009: State systems for ensuring the measurements. Optical reflectometers. Verifacation procedure
R 50.2.083-2013: State system for ensuring the uniformity of measurements. Chromatic dispersion measurement means for fiber. optical waveguides. Verification methods
R 50.2.084-2013: State systems for ensuring the uniformity of measurements. Working standards unit average optical power in fiber-optic transmission systems. Methods of verification
R 50.2.085-2013: State systems for ensuring the uniformity of measurements. Measuring instruments of dynamic characteristics of radiation in fibre-optical transmission systems. Verifacation procedure
R 50.2.086-2013: Polarization mode dispersion measurement means for fiber-optical waveguides. Verification methods
R 50-601-21-92: Recommendations. Establishment of product safety requirements in standards and technical conditions
RD 12.23.102-85: Mountain cars. Method for establishing values of noise and vibration characteristics
RD 52.37.789-2013: A method for remotely determining the thickness of snow cover in avalanche foci using a laser rangefinder. High Mountain Geophysical Institute (WGI)
SanPiN 5182-90: Sanitary rules for sewing production
STA 25.03.02-2004: Combined security system
STB 1568-2005: Occupational safety standards system. Printing equipment. Safety requirements and test methods
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
United power system and isolated power systems. Operative-dispatch management. Frequency control and control of active power. Norms and requirements
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
