Non-destructive testing. Method of magnetic particle testing
Контроль неразрушающий. Магнитопорошковый метод
Status: Not effective - Canceled in the Russian Federation. Registration information 875-st dated 07/06/2015 (official website of Rosstandart); IUS 2-2016
The standard applies to the magnetic particle method of non-destructive testing of parts, products and semi-finished products from ferromagnetic materials with a relative magnetic permeability of at least 40.
Стандарт распространяется на магнитопорошковый метод неразрушающего контроля деталей, изделий и полуфабрикатов из ферромагнитных материалов с относительной магнитной проницаемостью не менее 40.
Format: Electronic (pdf/doc)
Page Count: 16
Approved: USSR State Committee for Standards,
The Product is Contained in the Following Classifiers:
Construction (Max) »
Other state standards used in construction »
19 Tests »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
001/2011 TR TS. On safety of railway rolling stock »
Regulations and standards (to TR CU 001/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
002/2011 TR TS. On safety of high-speed rail »
Regulations and standards (to TR CU 002/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
003/2011 TR TS. On safety of railway infrastructure »
Regulations and standards (for TR CU 003/2011) »
ISO classifier »
19 TESTS »
19.100 Non-destructive testing »
National standards »
19 TESTS »
19.100 Non-destructive testing »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T59 General methods and means of control and testing of products. Methods of statistical control of quality, reliability, durability »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Applied statistics. Methods for statistical control of quality, reliability, durability. General methods of control and testing of products »
As a Replacement Of:
GOST 21105-75: Non-destructive testing. Method of magnetic particle testing
The Document References:
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.032-78: Operators location in a silting position. General ergonomic requirements
GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements
GOST 12.2.061-81: Occupational safety standards system. Industrial equipment. General safety requirements to working places
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.020-80: Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 3.1502-85: Unified system for technological documentation. Forms and rules of making documents on technical control
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
TU 17-08-249-86: Military clothing for the commanding and the rank and file of the fire brigade
The Document is Referenced By:
Decision 162: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis ensures compliance with the requirements of the technical regulations of the Eurasian Economic Union "On requirements for main pipelines for the transportation of liquid and gaseous hydrocarbons (TR EAEU 049/2020), and the list of international and regional (interstate) standards, and in their absence - national (state) standards that contain rules and methods of research (tests) and measurements, including sampling rules necessary for the application and implementation of the requirements of technical regulation of the Eurasian Economic Union "On requirements for pipelines for the transportation of liquid and gaseous hydrocarbons (TR EAEU 049/2020) and conformity assessment of technical regulation objects
DiOR 05: Methodology of diagnosing of technical condition and determining of residual life of process equipment of oil refineries and petrochemical plants
FTS ZhT TsT 086-2002: Locomotives and wagon rolling stock. Composite finishing wheels and solid-rolled finishing wheels. Certification requirements
GOST 10037-83: Autoclaves for building industry
GOST 11018-2011: Traction railway stock wheelsets of 1520 mm gauge railways. General specifications
GOST 1452-2011: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
GOST 15850-84: Mine parachutes for cages
GOST 15851-84: Suspension devices for mine cages
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 19191-73: Rigging screws with automatic stopping. Specifications
GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)
GOST 24950-2019: Curved bends and curve inserts on bends of the linear part of steel pipelines. Technical specifications
GOST 27834-95: Tool joints for drill pipes. Specifications
GOST 30237-96: Finished axles for rolling stock of railroads with 1520 mm track
GOST 30767-2002: Gas lift well use equipment. Safety requirements and test methods
GOST 30768-2001: Control head oil field equipment. Test methods
GOST 30776-2002: Oil field mobile pumping units. General specifications
GOST 30803-2002: Transmission tooth gears of the traction main railway stock . Specifications
GOST 30803-2014: Transmission tooth gears of the traction railway stock. Specifications
GOST 31334-2007: Axles for rolling stock of 1520 mm gauge railways. Specifications
GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments
GOST 31847-2012: Wheel sets for the special-purpose rolling stock. General specifications
GOST 3242-79: Welded joints
GOST 32503-2013: Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment. General technical requirements
GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
GOST 32601-2013: Centrifugal pumps for petroleum, petrochemical and natural gas industries. General technical requirements
GOST 32699-2014: Moulded side frame and bolster beam of two-axle three-piece bogies for freight wagons of 1520 mm gauge railways. Methods of non-destructive testing
GOST 3281-93: Axles for 1520 (1,524) mm gauge railway locomotives
GOST 33005-2014: Oil and gas industry. Drilling and production equipment. Connections of marine drilling risers. General specifications
GOST 33200-2014: Axles for wheelsets of railway rolling stock. General specifications
GOST 33752-2017: Steel welded cylinders for liquefied hydrocarbon gas, used as motor fuel on automotive vehicle. Specifications
GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications
GOST 34181-2017: Trunk pipelines for oil and oil products transportation. Technical diagnosis. Main principles
GOST 34568-2019: The main pipeline transport of oil and oil products. Cameras for starting and receiving cleaning and diagnostic tools. General specifications
GOST 34650-2020: Solid-rolled wheels and wheelset tires for railway rolling stock. Non-destructive testing methods
GOST 34656-2020: Axles of wheelsets of railway rolling stock. Non-destructive testing methods
GOST 34657-2020: Cast and rolled wheel centers for railway rolling stock. Non-destructive testing methods
GOST 4491-2016: Cast centers of wheels for railway rolling stock. General specifications
GOST 5286-2022: Screw-in steel pipe clamps for drill pipes. General technical requirements
GOST 5520-2017: Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions
GOST 7360-2015: Drill-stem subs. Technical specification
GOST R 50599-93: Welded steel vessels and apparatus under high pressure. Non-destructive control while the manufacturing and operating
GOST R 51175-98: Transmission tooth gears of the traction main railway stock. Specifications
GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications
GOST R 51365-99: Control head oil field equipment. General specifications
GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST R 52264-2004: Pressure diving chambers. General specifications
GOST R 52630-2006: Steel welded vessels and apparatus. General specifications
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST R 52942-2008: Railway applications. Axles. Product requirements.
GOST R 53443-2009: Motor vehicles. Piston pins of automobile engines. General technical requirements and methods of tests
GOST R 53444-2009: Motor vehicles. Crankshafts of engines. General technical requirements and methods of tests
GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST R 53682-2009: Fired heaters for refineries. General technical requirements
GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments
GOST R 53700-2009: Non-destructive testing. Magnetic particle testing. Part 3: Equipment
GOST R 54317-2011: Launching and technical complexes of space-rocket complexes. Safety requirements
GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions
GOST R 54907-2012: Trunk pipelines for oil and oil products transportation. Technical diagnosis. Basic principles
GOST R 55085-2012: Cylinders steel welded on pressure 1,6 MPа for liquefied hydrocarbon gas, used as motor fuel on car transport facility. Specifications
GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications
GOST R 55430-2013: Detachable pipe joints. Evaluation of technical condition and methods of testing. Operation safety
GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements
GOST R 55682.2-2013: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories
GOST R 55850-2013: Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift. Part 2. Surface-drive systems. General technical requirements
GOST R 56685-2015: Trunk pipelines for oil and oil products transportation. Fittings for diameters from 530 to 1220 mm. General specifications
GOST R 57178-2016: Electric-contact method of surface hardening of details. Typical technological process
GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure
I 23 SD-80*: Instructions for flaw detection of pipe bends made of pearlite steel
ITNJe-93: Instruction on technical supervision and operation of pressure vessels not covered by the Rules of Gosgortechnadzor
MDS 53-1.2001: Recommended Practice for Installation of Steel Structural Elements
MU 0898-00.001: Methods of conducting non-destructive testing of hooks of lifting and transport equipment (automobile, tractor, trailer cranes and crane beams)
MU 0898-00.003: Method of non-destructive ultrasonic testing of the details of the installation of the manifold unit
MU 1198-00.001: Method for non-destructive testing of ultrasonic testing of LBT drill pipes
MU 1198-00.006: Method of conducting non-destructive testing of the pulley block
MU 1198-00.007: Method of nondestructive testing of hook blocks and lifting hooks
MU 1198-00.008: Method for non-destructive testing of brake bands of drawworks and winches of units for underground and workover of wells
MU 1198-00.009: UTBC-5-170 hook block non-destructive testing methodology
MU 1198-00.010: Method for the non-destructive testing of shaft shaft winch LV-15
MU 1198-00.011: PBC-4 key non-destructive testing procedure
MU 1198-00.012: Methods of conducting non-destructive testing of HC-250 swivels
MU 1798-00.001: Methods of conducting non-destructive testing of the universal machine key UMK-1C
MU 2002-2002: Methodology for examining the technical condition of cabinet elevators for drill and casing KM type and cast elevators for casing EN type to determine the possibility of their further operation
MU 4296/755-00.011: Method of conducting non-destructive ultrasonic testing of gearbox KPC-700
MU 4296/755-00.014: Method for non-destructive ultrasound testing of wellhead armature AUSHGN-UHL
MU 4296/755-00.023: Method of nondestructive testing of the worm box of the APR-2VB submachine gun
MU 4296/755-00.025: Methods of conducting non-destructive testing of drill pipe UBT
MU 9001.00.001: Diagnostic technique for Romanian fountain fittings that have worked out their standard service life
NB ZhT TM 02-98: The safety standards for rail transport. Metal products for railway rolling stock. Standards of safety.
NB ZhT TsP 105-2003: Special purpose rolling stock. Axles for wheel sets. Safety standards
ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
OST 108.004.10-86: Quality control program of nuclear energetics products.
OST 108.004.109-80: Welded joint seams of CHP plant power equipment. Magnetic-particle control method.
OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.
OST 153-34.0-969-99A: Assembly units and parts of the supports of the station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). General technical requirements
OST 153-34.0-969-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. General technical requirements.
OST 153-34.0-984-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). General technical requirements
OST 24.125.170-01: Details and prefabricated units of supports, hangers, ties for lens compensators and drives for remote control of pipe fittings in thermal and nuclear power plants. General Specifications.
OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.
OST 24.149.03-89: Cogwheels for traction rolling stock of mainline railways. Technical conditions.
OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26.260.758-2003: Metal structures. General technical requirements.
OST 26-01-135-81: Vessels, devices and high-pressure pipeline parts forgings. General technical requirements, acceptance rules, Test methods.
OST 26-01-1434-87: Welding of steel technological pipelines on nominal pressure over 10 to 100 MPa (over 100 to 1000 kgf/cm2). Technical requirements.
OST 26-01-49-82: Assembling units and pipeline details for working pressure of 32 MPa (320 kgf/cm2). General specifications.
OST 26-01-84-78: Steel welded seams of pressure-operated vessels and devices. Magnetic-particle method.
OST 26-07-2065-85: Quality control program for nuclear thermal power plant special fittings.
OST 36-145-88: Steel technological pipelines for pressure Ру up to 10 MPa. Fluxing automatic arc welding. Typical technological process.
OST 36-79-83: Steel process pipes of carbon and low alloy steels Pi up to 10 MPa (100 kgs/cm2). Semi-automatic welding with consumable electrode in carbon dioxide. Typical process.
OST 95 10575-2002: Equipment and pipelines of separation plants. Weld joints and deposits. Control rules
OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements
OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings
PB 03-108-96: Process pipeline design and safe operation rules
PB 03-164-97: Standards for Fabrication of Steam and Hot-Water Boilers, Pressure Vessels, and Steam and Hot Water Piping by Welding
PB 03-278-99: Process rules for qualification tests of welders and welding production specialists
PB 03-75-94: Rules for arrangement and safe operation of steam and hot water piping
PB 10-115-96: Regulations of design and safe operation of pressure vessels
PI 1.4.75-2000: Arc welding in shielding gases of structural, stainless and heat-resistant steels and alloys
PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules
PNAE G-7-015-89: Uniform methods of inspection of main materials (semi-finished products), welded joints and building-up of the equipment and piping of nuclear power units. Magnetic particle inspection
R Gazprom: Temporary technical requirements for equipment for opening pipelines
RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure
RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases
RD 03-421-01: Guidelines for the diagnosis of the technical condition and the determination of the residual service life of vessels and apparatus
RD 03-495-02: Procedures for the qualification test of welders and welding work specialists
RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)
RD 08-195-98: Instructions for the technical diagnosis of the state of mobile units for well repair
RD 09-244-98: Instructions for diagnostics of technical condition of vessels, pipes and compressors, industrial ammonia refrigeration plants.
RD 10-112-2-09: Methodological guidelines for expert examination of hoisting equipment. Part 2: General purpose boom cranes and articulated hoisting cranes.
RD 10-112-97: Guidelines for conducting a survey of the technical condition of lifts (towers) with an expired service life in order to determine the possibility of their further operation. Part 9. Lifts and aerial platforms
RD 13-05-2006: Methodical recommendations on the procedure for conducting magnetic particle inspection of technical devices and structures used and operated at hazardous production facilities
RD 153-34.0-20.202-98: Ordinance on Execution Procedure for Documents for Deinstallation of Worn Generator Equipment Electrical of Electrical Stations Included in the UES of Russia
RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.
RD 153-34.1-17.424-2001: Procedural Guidelines for Investigation of Causes of Damage to Steam Turbine Rotor Components
RD 153-34.1-17.462-00: Procedural Guidelines Assessment of Serviceability of Steam Turbine Blades in the Process of Manufacturing, Operation, and Repair
RD 153-34.1-20.202-2003: Model Regulations on the Procedure for Preparing Documentation for the Decommissioning of Worn-Out Generating Equipment of Power Plants Included in the Unified Energy System of Russia
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
RD 24.020.11-93: Welded joints of stationary steam, gas and hydraulic turbines. Testing rules and quality evaluation standards.
RD 26.260.004-91: Procedural Guidelines. Prediction of Remaining Service Life of Equipment According to the Change in its Operational Parameters During Operation
RD 26.260.007-92: Pipelines and pipeline parts for pressure of 250 MPa (2500 kgf/cm2) of polyethylene production. Basic technical requirements, certification, operation and repair
RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.
RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus
RD 26.260.16-2002: Expert technical diagnostics of vessels and equipment operating under pressure at gas and gas condensate and oil production and processing facilities in the northern regions of the Russian Federation and underground gas storage facilities
RD 26.260.225-2001: Bodies of cylindrical vessels and devices. Technology, quality assurance
RD 2-97: Regulations on the system for the technical diagnosis of autoclaves in the production of building materials
RD 32.144-2000: Acceptance nondestructive testing. Solid wheels, tires and axes of wheel sets for rolling stock. Technical requirements.
RD 34.10.117-92: Method for Development of Specified Quantity Allowances for Standby Equipment and Spare Parts for Energy System Repair and Maintenance
RD 34.17.102-88: Guidelines for Use of Portable Magnetizing Devices for Magnetic Particle Flaw Detection of Parts of Electrical Equipment Without Cleaning Surfaces
RD 34.17.310-96: Welding, Heat Treatment, and Inspection During In-Service Repair of Welded Joints in Boiler Tubing Systems and Steam Lines
RD 34.17.401-95: Instructions for scope and procedure of metal input control of power equipment with pressure of 9 MPa and more, before its commissioning.
RD 34.17.402: Guidelines for Surface Inspection of Cast Housing Components of Steam Turbines for Electric Power Generating Stations Prior to Operation
RD 34.17.403-96: Guidelines for Ultrasonic Flaw Detection of Metal of Steam Supercooler Chambers at Locations Where Water is Injected
RD 34.17.418: Instructions for crack detection of pipeline bends made of pearlitic steel.
RD 34.17.427-89: Procedural Guidelines. Nondestructive Testing at Thermal Power Stations. General Requirements
RD 34.17.440-96: Procedural Guidelines for Assessment of Individual Service Life of Steam Turbines and Prolongation of Their Operational Life Beyond the Individual Service Life of Steam Turbines and Prolonging Their Operational Life Beyond The Equipment Service Life
RD 34.30.507-92: Procedural Guidelines for the Prevention of Corrosion Damage to Disk and Blade Apparatus of Steam Turbines in Phase Transition Zone
RD 39-0147014-554-89: Process for Nondestructive Testing of Parts and Assemblies of Drilling and Oil Production Equipment Repaired by Surfacing
RD 39-12-1150-84: Technology for Non-destructive testing swivels.
RD 39-12-822-82: Method of non-destructive testing of the elements of the universal machine key UMK-1C
RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994
RD EO 184.108.40.206.0867-2012: Methods for assessing the technical condition and residual life of building structures of nuclear power plants
RD ROSEK 04-010-98: Guidelines for the technical diagnosis and extension of the service life of pressure chambers
RD ROSEK-003-97: Hoisting machines. Magnetic particle control. Key Points
RDI 38.18.017-94: Instructions for magnetic particle testing of equipment and welded joints.
Resolution: Rules for the design and safe operation of steam and hot water boilers
SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation
SO 153-34.17.456-2003: Guidelines for assessing the survivability of equipment of thermal power plants
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 86.13330.2014: Main (Trunk) pipelines
ST RK 1647-2007: Railway transport. Magnetic particles method of non-destructive control of car parts
ST RK 1675-2007: Non-destructive control of locomotives parts and units, motor-car and special rolling stock. Control methods
ST SSFZhT TsT-121-2001: Cylindrical cogged wheels of traction gearing of traction rolling stock of main railway lines. Standard testing method
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements
ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants
ST TsKBA 024-2006: Pipe fittings. Determination of residual life and reliability indicators
ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments
ST TsKBA 088-2010: Pipe fittings. The quality control program of valves used for hydrogen sulfide environments
ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual
STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products
TU 34-38-20184-94: Stationary steam boilers. Intra drum separating devices. Technical conditions for major repairs
Customers Who Viewed This Item Also Viewed:
Occupation safety standards system. Semiconductor converters of electric energy. Safety requirements
Nature protection. Hydrosphere. General requirements to surface and underground water control against pollution by oil and oil products
Man-machine system Semigraphics General ergonomic requirements
Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places
Occupational safety standards system. Means of protection. General requirements and classification
Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v
Occupation safety standards system. Safety requirements. Switching devices for voltages below 1000 v
Safety valves, control valves and pressure regulators. Face-to-face lengths
Cables and cable fittings. Safety requirements
Occupational safety standards system. Loading and unloading works General safety requirements
Ventilation systems. General requirements
Occupational safety standards system. Controls of industrial equipment. General safety requirements
Occupational safety standards system. Transporting process of loads in all fields of national economy. General requirements safety
Work area air
General sanitary requirements for working zone air
Fire safety. General requirements
Electrical articles. Grounding terminals and grounding signs
Man-machine system. Operator's arm-chair. General ergonomic requirements
Occupational safety standards system. Electrical safety. General requirements and nomenclature of kinds of protection
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.