imgalt

GOST 24231-80

ГОСТ 24231-80

Non-ferrous metals and alloys. General requirements for sampling and sample preparation for chemical analysis

Цветные металлы и сплавы. Общие требования к отбору и подготовке проб для химического анализа

Status: Effective - Introduced for the first time. The limitation of effectiveness has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994).

The standard establishes the general requirements for the selection and preparation of samples for chemical analysis (with the exception of gas analysis) of non-ferrous metals and alloys. The standard does not set general requirements for sampling methods for the chemical analysis of rare, noble metals and their alloys, high-purity metals, mercury, hard alloys and spongy titanium, as well as for the determination of gases.

Стандарт устанавливает общие требования к отбору и подготовке проб для химического анализа (за исключением газового анализа) цветных металлов и сплавов. Стандарт не устанавливает общие требования к методам отбора проб для проведения химического анализа редких, благородных металлов и их сплавов, металлов высокой чистоты, ртути, твердых сплавов и губчатого титана, а также для определения содержания газов.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 6/10/1980

SKU: RUSS48684

Price: $101.00

English keywords: non-ferrous metals;


imgalt

The Product is Contained in the Following Classifiers:

ISO classifier » 77 METALLURGY » 77.120 Non-ferrous metals » 77.120.01 Non-ferrous metals in general »

National standards » 77 METALLURGY » 77.120 Non-ferrous metals » 77.120.01 Non-ferrous metals in general »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V5 Non-ferrous metals and their alloys. Rolled non-ferrous metals » V59 Test methods. Packaging. Marking »

National Standards for OKSTU » RAW MATERIALS OF NON-FERROUS METALS, NON-FERROUS METALS AND THEIR ALLOYS » Control methods (testing, analysis, measurements) »


The Document References:

GOST 15895-77: Statistical quality control. Terms and definitions

GOST R 50779.10-2000: Statistical methods. Probability and general statistical terms. Terms and definitions

GOST R 50779.11-2000: Statistical methods. Statistical quality control. Terms and definitions

The Document is Referenced By:

GOST 10025-2016: Tin-phosphor bronze rods. Specifications

GOST 10025-78: Tin-phosphor bronze rods. Specifications

GOST 10092-2006: Cupro-nickel tubes for heat-exchange apparatus. Specifications

GOST 10092-75: Cupro-nickel tubes for heat-exchanging apparatus. Specifications

GOST 10155-2016: Manganin uninsulated wire. Specification

GOST 10155-75: Manganin uninsulated wire

GOST 1018-2015: Aluminium, copper, brass and cupronickel strips for capsules. Specifications

GOST 1018-77: Bands aluminium, copper, brass and cupronikel for capsules. Specifications

GOST 1020-77: Cast brass ingots. Specifications

GOST 1020-97: Casting brass in pigs. Specifications

GOST 1048-2016: Strips of aluminium bronze for springs. Specifications

GOST 1048-79: Strips of aluminium bronze for springs. Specifications

GOST 1049-2015: Manganese nickel wire. Specifications

GOST 1049-74: Manganese nickel wire

GOST 1066-2015: Brass wire. Specifications

GOST 1066-90: Brass wire

GOST 10703-73: Aluminium sheets for graphic arts industry. Specifications

GOST 1089-82: Antimony. Specifications

GOST 10928-90: Bismuth. Specifications

GOST 10988-2016: Oxygen-free copper bars for electrovacuum industry. Specifications

GOST 10988-75: Oxygen-free copper bars for electrovacuum industry. Specifications

GOST 11069-2001: Primary aluminium. Grades

GOST 11069-2019: Primary aluminum. Grades

GOST 11070-2019: Primary aluminum ingots. Technical conditions

GOST 11070-74: Primary aluminium ingots. Specifications

GOST 1131-76: Strained aluminium alloys in pigs. Technical requirements

GOST 11383-2016: Thin-walled copper and brass tubes. Specification

GOST 11383-75: Thin-walled copper and brass tubes

GOST 1150-2018: Boiler zinc plates. Specifications

GOST 1150-72: Boiler zinc plates. Specifications

GOST 1173-2006: Copper foil, ribbons, sheets and plates. Specifications

GOST 1173-93: Copper strips. Specifications

GOST 1180-71: Zinc anodes. Specifications

GOST 1180-91: Zinc anodes. Specifications

GOST 12072.0-79: Cadmium. General requirements for methods of analysis

GOST 1208-2014: Pressed bronze tubes. Specifications

GOST 1208-73: Pressed bronze tubes

GOST 1208-90: Pressed bronze tubes

GOST 123-2008: Cobalt. Specifications

GOST 123-2018: Cobalt. Specifications

GOST 123-98: Cobalt. Specifications

GOST 12920-2013: Brass wire for cold upsetting

GOST 12920-67: Brass wire for cold upsetting. Specifications

GOST 1292-81: Lead-antimony alloys. Specifications

GOST 1293.14-83: Antimonous lead alloys. Spectral method for determination of sodium, calcium and magnesium

GOST 1293.15-90: Antimonous lead alloys. Spectrographical method for determination of nickel

GOST 13047.1-2002: Nickel. Cobalt. General requirements for methods of analysis

GOST 13047.1-2014: Nickel. Cobalt. General requirements for methods of analysis

GOST 13047.1-81: Nickel. Methods for the determination of nickel

GOST 13073-2018: Zinc wire.Technikal requirements. Specifications

GOST 13073-77: Zinc wire

GOST 13083-2016: Rods of nickel and nickel-silicon alloys. Specifications

GOST 13083-77: Rods of nickel and nickel-silicon alloys. Technical requirements

GOST 13548-2016: Thin-walled tubes of nickel and nickel alloys. Specification

GOST 13548-77: Thin-walled tubes of nickel and nickel alloys

GOST 1367.0-83: Antimony. General requirements for methods of analysis

GOST 13726-78: Aluminium and aluminium alloys strips. Specifications

GOST 13726-97: Aluminium and aluminium alloys strips. Specifications

GOST 13938.15-88: Copper. Methods for determination of chromium and cadmium

GOST 13938.1-78: Copper. Methods for determination of copper

GOST 1467-93: Cadmium. Specifications

GOST 1468-90: Cadmium anodes. Specifications

GOST 15040-2016: Oxygen-free copper pipes. Specification

GOST 15040-77: Oxygen-free copper pipes

GOST 1525-2015: Rods of monel. Specifications

GOST 1525-91: Rods of monel. Specifications

GOST 1535-2006: Copper rods. Specifications

GOST 1535-2016: Copper rods. Specifications

GOST 15471-2014: Ribbons and strips made of oxygen-free copper for electronics. Specifications

GOST 15471-77: Strips and ribbons of oxygen-free copper for electronics. Specifications

GOST 15515-2016: Nickel electrolyzed strips. Specifications

GOST 15515-70: Nickel electrolyzed strips. Specifications

GOST 15834-2016: Beryllium bronze wire. Specification

GOST 15834-77: Wire from beryllium bronze

GOST 15835-2013: Beryllium bronze bars. Specifications

GOST 1583-89: Aluminium casting alloys. Specifications

GOST 1583-93: Aluminium casting alloys. Specifications

GOST 15885-2018: Tin-zinc-lead bronze ribbons and strips. Specifications

GOST 15885-77: Tin-zinc-lead bronze ribbons and strips. Specifications

GOST 1595-90: Aluminium-manganese bronze strips and ribbons. Specifications

GOST 16130-90: Welding wire and rods of copper and copper alloys. Specifications

GOST 1628-2019: Bars are bronze. Technical conditions

GOST 1628-78: Bronze rods. Specifications

GOST 16358-2019: Copper tapes for coaxial trunk cables. Technical conditions

GOST 16358-79: Copper strips for coaxial main cables. Specifications

GOST 167-69: Lead tubes. Specifications

GOST 16774-2015: Copper tubes of rectangular and square sections. Specifications

GOST 16774-78: Copper pipes of rectangular and square section

GOST 17217-2018: Tubes of copper-nickel alloy МНЖ 5-1. Specifications

GOST 17217-79: Copper-nickel alloyed tubes grade Mnzh 5-1

GOST 17232-79: Aluminium and aluminium alloys plates. Technical conditions

GOST 17232-99: Aluminium and aluminium alloys plates. Specifications

GOST 17328-78: Tintless foundry bronze ingots. Specifications

GOST 1761-2016: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications

GOST 1761-92: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications

GOST 1789-2013: Beryllium bronze strips and tapes. Specifications

GOST 1789-70: Beryllium bronze strips and ribbons. Specifications

GOST 1790-2016: Wire made of chromel alloy T, alumel, copes and constantan for thermoelectrodes of thermoelectric converters. Specification

GOST 1790-77: Wire made of chrome, aluminum, copper and constantan alloys for thermo electrodes of thermo-electric converters

GOST 1791-2014: Wire of nickel and copper-nickel alloys for extending wires for the thermoelectric converters. Specifications.

GOST 1791-67: Wire from nickel and copper-nickel alloys for extension leads to the thermoelectric transducers.

GOST 18326-87: Low-alloyed zinc sheets for one-stage and multistage etching. Specifications

GOST 18327-2018: Zinc strips for general use. Specifications

GOST 18327-73: Zinc strips for general use. Specifications

GOST 18394-2016: Tin plated lead and tin foil. Specifications

GOST 18394-73: Tin plated lead foil and tin foil. Specifications

GOST 18475-82: Cold-worked aluminum and aluminum alloy pipes

GOST 18482-2018: Aluminium and aluminium alloy extruded tubes. Specifications

GOST 18482-79: Aluminium and aluminium alloy extruded pipes. Specifications

GOST 18846-2018: Zinc foil. Specifications

GOST 18846-73: Zinc foil. Specifications

GOST 19251.0-79: Zinc. General requirements for methods of analysis

GOST 193-2015: Copper ingots. Specifications

GOST 193-79: Copper ingots. Specifications

GOST 19424-74: Cast zinc alloys in pigs. Specifications

GOST 19424-97: Cast zinc alloys in pigs. Specifications

GOST 19437-2019: Cylindrical aluminum ingots. Technical specifications

GOST 19437-81: Cylindrical aluminium ingots. Specifications

GOST 19441-74: Magnesium-alloy extruded tubes. Specifications

GOST 19657-84: Magnesium alloy pressed profiles. Specifications

GOST 19703-79: Leaded brass wire type LS 63-3 specifications

GOST 20580.0-80: Lead. General requirements for methods of chemical analysis

GOST 2060-2006: Brass rods. Specifications

GOST 2060-73: Brass rods. Specifications

GOST 2060-90: Brass rods. Specifications

GOST 20707-2015: Copper and brass ribbons for radiators. Specifications

GOST 20707-80: Copper and brass ribbons for radiators. Specifications

GOST 20900-2014: Copper tubing for waveguides and brass right angle tubes. Specifications

GOST 20900-75: Copper and brass rectangular waveguide tubes

GOST 2132-2015: Nickel anodes. Specifications

GOST 2132-90: Nickel anodes. Specifications

GOST 21438-95: Zinc antifriction alloys in pigs. Specifications

GOST 21488-76: Extruded bars of aluminium and aluminium alloys

GOST 21488-97: Pressed bars of aluminium and aluminium alloys. Specifications

GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications

GOST 21646-2003: Copper and brass tubes for heat-exchange apparatus. Specifications

GOST 21646-76: Brass tubes for heat exchange apparatus

GOST 2170-2016: Strips of nickel and nickel low alloys. Specifications

GOST 2170-73: Strips of nickel and nickel low alloys. Specifications

GOST 2179-2015: Nickel and siliceous nickel wire. Specifications

GOST 2179-75: Nickel and silicon nickel wire

GOST 21930-76: Tin-lead solders in pigs. Specifications

GOST 2205-2016: L-90 tapes and strips for plating. Specifications

GOST 2205-71: L-90 tapes and strips for plating. Specifications

GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications

GOST 2208-91: Brass strips for general use. Specifications

GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications

GOST 22233-2018: Aluminium alloy extruded sections for translucent envelopes. Specifications

GOST 22666-2016: Copper wire and kopel alloy wire for low-temperature thermoelectrical transducers. Specifications

GOST 22666-77: Copper and copel alloy wire for low-temperature thermocouples

GOST 23328-95: Zinc alloys. Methods of spectral analysis

GOST 23697-79: Longitudinal welded tubes from aluminium alloys

GOST 23855-2019: Cylindrical ingots from aluminum alloy AD31. Technical conditions

GOST 23855-79: Cylindrical ingots of aluminium alloy AD31. Specifications

GOST 23886-91: Cadmium sheets and plates. Specifications

GOST 23957.1-2003: Zinc. Atomic-absorption method for determination of lead, cadmium, antimony, iron and copper

GOST 23957.1-80: Zinc. Atomic-absorbic method for the determination of lead, cadmium, antimony, iron and copper

GOST 24301-80: Bronze and brass cast bars and tubes. Technical conditions

GOST 24301-93: Bronze and brass cast bars and tubes. Specifications

GOST 24552-81: Foil out of gold, silver and their alloys. Specifications

GOST 24890-81: Welded titanium and titanium alloys pipes

GOST 24978-91: Copper-zinc alloys. Methods for determination of zinc

GOST 25086-2011: Non-ferrous metals and their alloys. General requirements for methods of analysis

GOST 25086-87: Nonferrous metals and their alloys. General requirements for methods of analysis

GOST 25284.0-82: Zinc alloys. General requirements for the methods of analysis

GOST 25284.0-95: Zinc alloys. General requirements for methods of analysis

GOST 2581-78: Magnesium alloy ingots. Specifications

GOST 25905-2018: Aluminium foil for condensers. Specifications

GOST 25905-83: Aluminium foil for condensers. Specifications

GOST 2622-2016: Manometric tubes made of bronze БрОФ4-0,25 and brass Л63. Specifications

GOST 2622-75: Manometric tubes made of bronze БрОФ4-0,25 and brass Л63. Specifications

GOST 2624-2016: Copper and brass capillary tubes. Specification

GOST 2624-77: Copper and brass capillary tubes

GOST 26492-85: Titanium and titanium alloys rolled bars. Specifications

GOST 27265-87: Titanium and titanium-alloy filling wire

GOST 28106-2015: Copper cathodes. Sampling and preparation of samples and pieces for determination of electrical resistivity

GOST 28106-89: Copper cathodes. Sampling and preparation of samples and test pieces for determination of electrical resistivity

GOST 28813-90: Plain bearings. Metallic multilayer materials for thin-walled plain bearings

GOST 2936-2016: Planc-oval scamless radiator tubes. Specifications

GOST 2936-75: Plane-oval seamless radiator tubes

GOST 295-79: Aluminium for desoxydation, manufacture of ferroalloys and aluminotermiks. Specifications

GOST 295-98: Aluminium for deoxidation, manufacture of ferroalloys and aluminothermy. Specifications

GOST 30608-98: Tin bronzes. Method of X-ray fluorescent analysis

GOST 30609-98: Brass castings. Method of X-ray fluorescent analysis

GOST 30620-98: Aluminium piston alloys. Specifications

GOST 31366-2008: Brass rods for free machining purposes. Specifications

GOST 31382-2009: Copper. Methods of analysis

GOST 32590-2013: Fittings of copper and copper alloys with ends for capillary soldering or capillary brazing to copper tubes. Specifications

GOST 32591-2013: Fittings of copper and copper alloys with compression ends for use with copper tubes. Specifications

GOST 32598-2013: Tubes copper round for water and gas. Specifications

GOST 3640-79: Zinc. Specifications

GOST 3640-94: Zinc. Specifications

GOST 4004-64: Aluminium ingots for wire. Specifications

GOST 4134-2015: Copper alloys sections for collectors of electrical machines. Specifications

GOST 4134-75: Copper alloys sections for collectors of electrical machines. Specifications

GOST 4442-2014: Bands and strips of lead brass. Specifications

GOST 4442-72: Strips and bands of lead brass. Specifications

GOST 4748-92: Silicon-manganese bronze strips and ribbons. Specifications

GOST 4752-2012: Cylinder copper wire. Specifications

GOST 4752-79: Copper cylinder wire

GOST 494-2014: Brass tubes. Specifications

GOST 494-90: Pipes of brass

GOST 495-77: Copper sheets and ribbons. Specifications

GOST 495-92: Copper sheets and ribbons. Specifications

GOST 5063-2016: Ribbons of cupro-nikel alloys. Specifications

GOST 5063-73: Ribbons of cupro-nickel alloys. Specifications

GOST 5187-2003: Nickel silver, german silver and monel tapes. Specifications

GOST 5187-70: Nickel silver, german silver and monel tapes. Specifications

GOST 5189-2018: Constantan strips. Specifications

GOST 5189-75: Constantan strips. Specifications

GOST 5220-2018: Germen silver wire. Specifications

GOST 5220-78: Nickel silver wire

GOST 5221-2008: Tin-zink bronze wire. Specifications

GOST 5221-77: Tin-zinc bronze wire

GOST 5222-2016: Silicon-manganese bronze wire. Specifications

GOST 5222-72: Silicon-manganese bronze wire

GOST 529-2015: Radiator tubes. Specifications

GOST 529-78: Radiator tubes

GOST 5307-2015: Constantan uninsulated wire. Specifications

GOST 5307-77: Constantan noninsulated wire

GOST 5362-2018: Brass ribbons. Specifications

GOST 5362-78: Brass ribbons. Specifications

GOST 546-2001: Copper cathodes. Specifications

GOST 5529-75: Round brass wire for foot-wear industry

GOST 5638-2018: Copper roil foil for technical purposes. Specifications

GOST 5638-75: Copper roll foil for technical purposes. Specifications

GOST 598-2020: General purpose zinc sheets. Specifications

GOST 598-90: General-purpose zinc sheets. Specifications

GOST 6012-2011: Nickel. Methods of the chemical and atomic emission spectrographic analysis.

GOST 6012-78: Nickel. Methods of chemical-atomic-emission spectral analysis

GOST 6012-98: Nickel. Methods of chemical-atomic-emission spectral analysis

GOST 614-73: Tin bronze in pigs. Specifications

GOST 614-97: Casting bronzes in pigs. Specifications

GOST 617-2006: General-purpose copper and brass tubes of round section. Specifications

GOST 617-90: Copper tubes. Specifications

GOST 618-2014: Aluminum foil for technical purposes. Specifications.

GOST 618-73: Aluminum foil for technical purposes. Specifications

GOST 6235-2020: Nickel sheets and strips. Specifications

GOST 6235-91: Strips and ribbons of nickel. Specifications

GOST 6511-2014: Wrought tin-zinc bronze rods. Specifications

GOST 6511-60: Wrought stannic-zinc bronze rods. Specifications

GOST 6674.0-96: Copper-phosphorus alloys. General requirements for methods of analysis

GOST 6688-2016: Brass bars of rectangular section. Specifications

GOST 6688-91: Brass bars of rectangular section. Specifications

GOST 745-2003: Aluminium foil for packing. Specifications

GOST 745-2014: Aluminium foil for packing. Specifications

GOST 767-2020: Copper anodes. Specifications

GOST 767-91: Copper anodes. Specifications

GOST 8036-2013: Strips of brass Л90. Specifications

GOST 8036-79: Tombac strips. Specifications

GOST 804-72: Primary magnesium ingots. Specification

GOST 804-93: Primary magnesium ingots. Specifications

GOST 849-2008: Primary nickel. Specifications

GOST 849-2018: Primary nickel. Specifications

GOST 849-70: Primary nickel. Specifications

GOST 849-97: Primary nickel. Specifications

GOST 851.1-93: Primary magnesium. Methods for determination of iron

GOST 860-75: Tin. Specifications

GOST 8617-2018: Pressed sections of aluminium and aluminium alloys. Specifications

GOST 8617-81: Pressed sections out of aluminium and aluminium alloys. Specifications

GOST 8776-2010: Cobalt. Methods of chemical-atomic-emission spectral analysis

GOST 89-2018: Rolled-in lead sheets. Specifications

GOST 89-73: Rolled-in lead sheets. Specifications

GOST 931-90: Brass sheets and strips. Specifications

GOST 9498-79: Flat ingots of aluminium and wrought aluminium alloys for rolling. Specifications

GOST 9559-89: Lead sheets. Specifications

GOST R 51573-2000: Tubes from alloyed brasses for heat-exchange apparatus. Specifications

GOST R 52318-2005: Round copper tubes for water and gas. Specifications

GOST R 52597-2006: Brass rods for free machining purposes. Specifications

GOST R 52922-2008: Fittings from copper and copper alloys for capillary soldering to copper tubes. Specifications

GOST R 52948-2008: Fittings from copper and copper alloys with compression ends for use with copper tubes. Specifications

GOST R 53405-2009: Copper cylinder wire. Specifications

GOST R 53439-2009: Brass wire for cold upsetting. Specifications

GOST R 53499-2009: Tombac strips. Specifications

GOST R 53777-2010: Master alloys of aluminium. Specifications

GOST R 53803-2010: Copper rod for electrical purposes. Specifications

GOST R 54150-2010: Wire from БрКМц3-1 bronze. Specifications

GOST R 54152-2010: Tapes and strips from Л90 brass for plating. Specifications

GOST R 54158-2010: Thin-walled tubes from copper and copper alloys. Specifications

GOST R 54160-2010: Ribbons from cuprum-nickel, nickel silver and monel. Specifications

GOST R 54310-2011: Blister copper. Specifications

GOST R 54564-2011: Non-ferrous metals and alloys scarp and waste. General specifications

GOST R 54564-2022: Non-ferrous metals and alloys scrap and waste. General technical conditions

GOST R 54568-2011: Tubes from alloy МНЖ5-1. Specifications

GOST R 55375-2012: Primary aluminium and alloys based on it. Grades

GOST R 55411-2013: Roll-formed shapes of aluminium and aluminium alloys. Specifications

GOST R 56031-2014: Magnesium alloys pressed wire. Specifications

GOST R 56281-2014: Aluminum alloy extruded large round tubes. Specifications

GOST R 56282-2014: Aluminum alloy extruded large solid sections. Specifications

GOST R 57376-2016: Copper ingots. Specifications

GOST R 58333-2018: Pressed finned panels made of aluminum alloys. Technical specifications

GOST R 58419-2019: Additive technology. Products made of titanium alloys made by selective electron beam fusion. General specifications

MI 2608-2000: State system for ensuring uniformity of measurements. Content and execution of technical documentation for industry standard samples and standard samples of enterprises. General requirements

OST 1 90113-86: Pressed sections of aluminium alloys. Specifications.

ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements

ST TsKBA 051-2008: Pipe fittings. Castings from non-ferrous alloys. Technical requirements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
High strength rolled steel. General specification
Language: English
Price: $289.00
imgalt
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!