GOST 6267-74
ГОСТ 6267-74
|
|
Grease ЦИАТИМ-201. Specifications
Смазка ЦИАТИМ-201. Технические условия
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)
The standard applies to the cold resistant grease TsIATIM-201, designed for lubrication of low-loaded rolling and sliding friction units at temperatures from minus 60 to plus 90 ° С.
Стандарт распространяется на морозостойкую смазку ЦИАТИМ-201, предназначенную для смазывания малонагруженных узлов трения качения и скольжения при температурах от минус 60 до плюс 90°С.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
7/25/1974
SKU: RUSS49473
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
030/2012 TR CU. On requirements for lubricants, oils and special fluids »
Regulations and standards (to 030/2012 TR CU) »
Standards for pipe fittings (TPA) »
9. Materials for piping valves (TPA) »
9.5 Lubricants and preservation materials »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.9 Petroleum products of industrial and domestic consumption, lubricating oils and greases, plastic »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.100 Lubricants, industrial oils and related products »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.100 Lubricants, industrial oils and related products »
National Standards for KGS (State Standards Classification) »
Latest edition »
B Oil products »
B3 Paste lubricants »
B32 Antifriction heat-resistant, frost-resistant, extreme pressure and chemically resistant lubricants »
National Standards for OKSTU »
OIL, PETROLEUM PRODUCTS, GAS »
Lubricants »
The Document is Replaced With:
GOST 6267-2021: CYATIM-201 grease. Technical specifications
As a Replacement Of:
GOST 6267-59: Grease ЦИАТИМ-201. Technical requirements
The Document References:
GOST 111-90: Polished glass. Specifications
GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage
GOST 23258-78: Plastic lubricants
GOST 2477-65: Petroleum and petroleum products. Method for determination of water content
GOST 2517-85: Crude oil and petroleum products. Methods of sampling
GOST 5346-78: Plastic lubricants. Methods for determination of penetration with the conical penetrometer
GOST 5734-76: Greases method for the determination of oxidation stability
GOST 6479-73: Lubricating greases. Method for determination of mechanical impurities content by hydrochloric acid decomposition
GOST 6707-76: Lubricating greases. Method for determination of free alkalies and free organic acids
GOST 6793-74: Petroleum products. Method of drop point determination
GOST 7142-74: Lubricating greases. Methods for determination of oil separation
GOST 7143-73: Greases. Method for determination of ultimate strength and thermostrengthening
GOST 7163-84: Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
GOST 859-2001: Copper. Grades
GOST 859-78: Copper. Grades
GOST 9.080-77: Unified system of corrosion and ageing protection. Plastic greases. Accelerated method for determination of corrosion effect on metals
GOST 9566-74: Greases. Method for determination of evaporability
The Document is Referenced By:
Album A 31.0105.01-89: Control parts. Handwheels, rotary handles, knobs, buttons. Design and dimensions
GOST 10674-97: Tank Car of 1520 mm gauge mainline railways. General technical conditions
GOST 11004-84: Principal ventilation mine blowers
GOST 15156-84: Lubricating oils, lubricants and special liquids for industrial use in tropical climate regions
GOST 15880-83: Electric drills
GOST 15880-96: Electric drills. General specifications
GOST 18324-73: Ionizing radiation source units for radioisotope instruments of relay type
GOST 19031-73: Closing up for ropes and their components. Specifications
GOST 23.221-84: Products weak resistance assurance. Experimental evaluation of lubricants temperature stability at friction
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 2361-74: Limiters for cases flap covers. Specifications
GOST 2364-74: Angles for wood cases. Specifications
GOST 23764-79: Gamma-defectoscopes. General technical specifications
GOST 24434-80: Laminated wall and roof panels with plastic foam thermal insulation. Plastic foams. Method of determining shrinkage
GOST 26191-84: Oils, lubricants and special fluids. Limited list and order of application
GOST 26613-85: Lathe tools with mechanic fastening of replaceable faceted plates
GOST 27174-86: Open-type alkaline nickel-cadmium rechargeable cells and storage batteries of capacity up to 150 a/h
GOST 2748-77: Hard rubber plates, rods and tubes for electrotechnical purposes. Specifications
GOST 28433-90: Retrievers
GOST 28434-90: Overhead travelling stacker cranes
GOST 3.1127-93: The unified system of technological documentation. General rules for drawing up of textual technological documents
GOST 32204-2013: Current collectors of railway electric rolling stock. General specifications
GOST 32586-2013: Vibroinsulators rubber and rubber-reinforced for automotive technic. Specifications
GOST 8.096-82: State system for ensuring the uniformity of measurements. The 1-st order micro manometers of МКМ-type. Methods and means of verification
GOST 9984-85: Ceramic support insulators rated for voltage over 1000 v
GOST R 50399-92: Air-foam nozzles. Specifications
GOST R 52034-2003: Ceramic support insulators for voltage over 1000 V. General specifications
GOST R 52034-2008: Ceramic support insulators for voltage over 1000 V. General specifications
GOST R 52082-2003: Support polymeric outdoor insulators for voltage 6-220 kV. General specifications
GOST R 54334-2011: Current collectors of railways electric rolling stock. General specifications
GOST R 58018-2017: Interim composite polymeric supports for overhead power lines voltage 35-220 kV. General specifications
GOST R 58021-2017: Composite polymeric supports for overhead power lines of voltage 6-20 kV. General specifications
I 1.09-10: Instructions for connecting insulated conductors of wires and cables
IO 200-RSFSR-15-0045-80: Typical technology for routine maintenance of daily, first, second and seasonal technical services for KAMAZ-5320, KAMAZ-5410, KAMAZ-5511
Letter 15153/05-DG: About the application of the standards
OST 108.988.01-82: Preservation of items of boiler production. Lubricants, inhibitors. Technical requirements.
OST 24.023.29-84: Production planning system. Expanded plastic details produced by compression moulding and high-pressure die casting. Standard techniques and procedures.
OST 26-07-1144-75: Electric drives for remote control of pipeline stop valving. General specifications.
OST 26-07-1205-75: Methods of applying anti-friction lubricants on pipe fittings surfaces.
OST 26-07-2067-84: Pipeline fittings. Antifriction lubricating materials. Scope of application. Consumption standards.
OST 26-07-596-72: Electric drives for pipeline fittings. Export including tropical climate countries. General requirements.
OST 37.002.1153-86: Typical technological process sealing isolation and braiding at the ends of electrical wires. Main provisions.
P 902-94/AO: Guidelines for taking environmental protection requirements into account when designing the oil facilities of hydropower plants and PSPs
PI 1.2.315-89: Production of glazing parts from organic glasses
Protocol 03-14-PR: Meeting of the Working Group on making decisions on the possibility of using national and interstate standards developed on the basis of (instead of) previously valid, to ensure the activities of the Federal Accreditation Service (Rosakkreditatsiya) on accreditation and competence verification of accredited persons of April 29, 2022 N 03-14-pr
R 301265-0333-87: Instructions on the procedure for the maintenance and operation of speedometer equipment cars
R 50-54-44-88: Recommendations. Ensuring the durability of products. Method for determination of indicators of the lubricant duration of a plastic lubricant
RD 102-002-88: Machines, tools and equipment for pipeline construction. Designing and manufacturing.
RD 112 RSFSR-023-89: Guidelines. GSE. Capacity technological pipelines. Measurement Technique
RD 24.207.08-90: Pipe fittings. Running threaded pairs. Main dimensions and technical requirements. Recommendations for use
RD 34.10.351: Specified Quantity Allowances for Materials for Repair of Turbine Generators
RD 34.10.353: Specified Quantity Allowances for Materials for Repair of Electric Motors
RD 34.20.506-84: Typical operating and repair instructions for complete switchgears 6 - 10 kV
RD 34.27.507: Guidelines for Operation of Venturi Scrubber SVU
RD 34.45.614: Guide to Overhaul of Turbine Generators TVF-120-2 and TVF-100-2
RD 52.04.186-89: Part 1. Guidance on the control of air pollution. Pollution of the atmosphere in cities and other settlements. Main Geophysical Observatory. A.I.Voyeikova (MGO)
RD 52.33.708-2008: Rates of expenditure of materials for the production of agrometeorological observations
RD 52.68-137-87: Unified industry norms for the consumption of materials and spare parts for the repair and operation of communications (telegraph and fax equipment)
RD 52.68-137-87: Unified industry norms for the consumption of materials and spare parts for the repair and operation of communications (telegraph and fax equipment)
RD RTM 26-07-255-84: Pipe fittings. The friction coefficients in the nodes of reinforcement
RTM 16.689.169-75: Explosion-proof and mine electrical equipment repair
SN 78-79: Instructions on the device, operation and relocation of rail tracks of construction tower cranes
ST TsKBA 002-2003: Pipe fittings. Latches. The method of force calculation
ST TsKBA 057-2008: Pipe fittings. The friction coefficients in the nodes of reinforcement
ST TsKBA 059-2008: Pipe fittings. Antifriction grease. Scope, application rates and application methods
ST TsKBA 059-2018: Pipe fittings. Antifriction grease. Scope, application rates and application methods
ST TsKBA 060-2008: Pipe fittings. Running threaded pairs. Main dimensions, technical requirements
ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions
ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual
TU 102-416-86: Garage reinforced concrete prefabricated for individual use
TU 102-461-88: Garage reinforced concrete prefabricated box single and double row collective use
TU 102-541-89: Garage assembly individual use of ash and slag concrete
TU 102-84.3-87: Garage reinforced concrete prefabricated box with two floors for collective use
TU 24-09.411-82: Special electric bridge cranes
TU 34-38-20365-94: Power valves. General technical conditions for major repairs
TU 38 0051166-98: Rubber compounds for the rubber products of aircraft
VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.