GOST 11530-93
ГОСТ 11530-93
|
|
Rail joint bolts. Specifications
Болты для рельсовых стыков железнодорожного пути. Технические условия
Status: Not effective - Superseded. Information about the registration of 84-st from 02.17.2015 (the official website of Rosstandart); (IUS 8-2015)
The standard applies to round head bolts and an oval head, accuracy class C, used to fasten the P38, P43, P50, P65 and P75 rail-type rail joints with two-head lining, as well as bolts with a reduced oval head height for insulating joints of the specified
Стандарт распространяется на болты с круглойголовкой и овальным подголовком, класса точности С, применяемые для скрепления двухголовными накладками стыков железнодорожных рельсовтипов Р38, Р43, Р50, Р65 и Р75, а также на болты с уменьшенной высотой овальн
Choose Language:
Format: Electronic (pdf/doc)
Approved: Committee of the Russian Federation for Standardization, Metrology and Certification,
6/2/1994
SKU: RUSS50056
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
45 Railway technology »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
002/2011 TR TS. On safety of high-speed rail »
Regulations and standards (to TR CU 002/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
003/2011 TR TS. On safety of railway infrastructure »
Regulations and standards (for TR CU 003/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.3 Railway and tram locomotives, rail rolling stock »
ISO classifier »
45 RAILWAY ENGINEERING »
45.080 Rails and railway components »
National standards »
45 RAILWAY ENGINEERING »
45.080 Rails and railway components »
National Standards for KGS (State Standards Classification) »
Latest edition »
D Vehicles and packaging »
D5 Rail transport »
D55 Frames, units and parts of rolling stock of railways »
The Document is Replaced With:
GOST 11530-2014: Rail joint bolts. Specifications
As a Replacement Of:
GOST 11530-76: Rail joint bolts
The Document References:
GOST 11532-93: Nuts for rail joints. Specifications
GOST 1497-84: Metals. Methods of tension test
GOST 16018-79: Nuts for clamp and inserted bolts of rail track fastenings
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 1759.1-82: Bolts, screws, studs and nuts. Tolerance, monitoring methods of dimensions and deviations of shape and surface orientation
GOST 1759.2-82: Bolts, screws, and studs. Surface imperfections and monitoring methods
GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods
GOST 17769-83: Fastening details. Rules of acceptance
GOST 18160-72: Fasteners. Packing. Marking. Transportation and storage
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
The Document is Referenced By:
GJeSN 81-02-28-2001: State estimated standards. State elementary estimate norms for construction and special construction work. Part 28. Railways (as amended by orders of the Ministry of Construction of Russia dated January 30, 2014 N 31 / pr, dated October 17, 2014 N 634 / pr, dated November 12, 2014 N 703 / pr)
GOST 11532-93: Nuts for rail joints. Specifications
MDS 12-44.2008: Recommendations for drafting work on the construction of a railway track tower crane
MDS 12-61.2012: The project for the production of works on the device of a rail track of a tower crane with a concrete beam BRP-62.8.3
MDS 12-68.2015: Work Project. The device rail track tower crane
RD 10-117-95: Requirements for Installation and Safe Operation of Rail Tracks of Gantry Cranes
RD 22-28-35-99: Design, construction and safe operation of the rail tracks of tower cranes
RD 50:48:0075.01.05: Recommendations on organization and safe operation of ground gantry rails.
RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks
SNiP 3.08.01-85: Construction mechanical means. Rail tracks for tower cranes
SP 12-103-2002: Tracks for ground rail cranes. Design, installation and operation
|
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
