GOST 6307-75

ГОСТ 6307-75

Petroleum products. Method of test for water-soluble acids and alkalies

Нефтепродукты. Метод определения наличия водорастворимых кислот и щелочей

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Decree of the State Standard No. 1834 of 11.28.91

The standard applies to liquid petroleum products, additives, greases, paraffins, ceresins, wax compounds and establishes a method for determining the presence of water-soluble acids and alkalis (TCC) in them.

Стандарт распространяется на жидкие нефтепродукты, присадки, пластичные смазки, парафины, церезины, восковые составы и устанавливает метод определения наличия водорастворимых кислот и щелочей (ВКЩ) в них.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 8

Approved: Gosstandart of the USSR, 7/30/1975

SKU: RUSS50942

Price: $47.53




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 75 Extraction and processing of oil, gas and related production »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.9 Petroleum products of industrial and domestic consumption, lubricating oils and greases, plastic »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.2 Testing and control of products of fuel and energy industry » 4.2.2 Oil, oil products and gas »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.080 Petroleum products in general »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.080 Petroleum products in general »

National Standards for KGS (State Standards Classification) » Latest edition » B Oil products » B0 General rules and regulations for oil refining industry » B09 Test methods. Packaging. Marking »


As a Replacement Of:

GOST 6307-60: Petroleum products. Method for the determination of water-soluble acids and alkalis

The Document References:

GOST 12026-76: Filter paper for laboratory application

GOST 17299-78: Technical ethyl alcohol. Specifications

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions

GOST 29227-91: Laboratory glassware. Graduated pipettes. Part 1. General requirements

GOST 8505-80: Nefras-C 50/170. Specifications

GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications

The Document is Referenced By:

GOST 10121-76: Selectively purified transformer oil

GOST 1012-2013: Aviation petrols. Specifications

GOST 1012-72: Aviation petrol

GOST 10227-2013: Jet fuels. Specifications

GOST 10227-86: Jet fuels

GOST 10363-78: Oil ЭШ for hydraulic systems of high-load mechanisms. Specifications

GOST 10433-75: Fuel oil for gas-turbine plants. Specifications

GOST 10585-2013: Petroleum fuel. Mazut. Specifications

GOST 10585-75: Black oil fuel

GOST 10585-99: Oil fuel. Mazut. Specifications

GOST 11122-84: Hinge oil BНИИ НП-25. Specifications

GOST 12308-2013: Thermostable fuels T-6 and T-8B for jet engines. Specifications

GOST 12308-89: Thermo stable t-6 and t-8b fuels

GOST 12672-77: Oil for rolling mills ПС-28. Technical specifications

GOST 12869-77: Electrical insulating synthetic fluid octol. Specifications

GOST 13076-86: Synthetic oil BНИИ НП 50-1-4ф. Specifications

GOST 15037-69: Grease for impregnating organic strand cores of wire rope

GOST 15819-85: Oils РМ and РМЦ. Specifications

GOST 1667-68: Motor fuel for medium- and low-speed diesel engines

GOST 1805-76: Apparatus oil МВП. Specifications

GOST 1861-73: Compressor oils

GOST 19537-83: Gun grease. Specifications

GOST 20458-89: Grease Torsiol-55. Specifications

GOST 20734-75: Hydraulic fluid 7-50C-3. Specifications

GOST 20799-75: Industrial oils. Specifications

GOST 20799-88: Industrial oils Specifications

GOST 2084-77: Mobile gasoline Specifications

GOST 21532-76: Horological lubricant PS-1. Specifications

GOST 21743-76: Aviation oils

GOST 23652-79: Transmission oils

GOST 23683-89: Hard petroleum paraffines

GOST 2488-79: Ceresin. Specifications

GOST 2712-75: Grease АМС. Specifications

GOST 305-2013: Diesel fuel. Specifications

GOST 305-82: Diesel fuel. Specifications

GOST 3134-78: White spirit

GOST 32-74: Turbine oils

GOST 3582-84: Medical vaseline. Specifications

GOST 3677-76: Ceresin composition. Specifications

GOST 4.23-83: Quality ratings system. Plastic greases. Quality characteristics nomenclature

GOST 4095-75: Isooctane for industrial use. Specifications

GOST 4225-76: Perfume oil. Specifications

GOST 443-76: Benzene-solvent for rubber industry. Technical requirements

GOST 4806-79: Shale oil fuel. Specifications

GOST 5546-86: Oils for refrigerating machines

GOST 5774-76: Condenser vaselin. Technical requirements

GOST 610-2017: Axle oils. Technical conditions

GOST 610-72: Oils for axle journals. Specifications

GOST 6360-58: Oils MT. Specification

GOST 6411-76: Heavy cylinder oils

GOST 6457-66: Oils МК-8. Specifications

GOST 6794-2017: Oil AMG-10. Technical conditions

GOST 6794-75: Oil АМГ-10. Specifications

GOST 6997-77: Compositions for filling cable joints. Specifications

GOST 7171-78: Petrol-resisting grease. Specifications

GOST 7611-75: Oil for ventilating filters. Specifications

GOST 7936-76: Thickened clock oil PS-4

GOST 8463-76: Oil С-220. Specifications

GOST 8505-80: Nefras-C 50/170. Specifications

GOST 8551-74: Grease ЦИАТИМ-205. Specifications

GOST 8863-76: Instrument naphtha. Specification

GOST 9243-75: KS-19 compressor oil

GOST 9549-80: Copper naphthenate for preservative compounds. Specifications

GOST 9762-76: Grease МС-70. Specifications

GOST 982-80: Transformer oils

GOST 9972-74: Petroleum turbine oils with additives

GOST R 55775-2013: Aviation oil МС-8П. Specifications

GOST R 56147-2014: Jet fuels. Procedure for qualification tests and drawing up of a technical statement

GOST R 57659-2017: The railway transport objects testing methods of prolongation operating cycle. Part 1. Power transformers and auto transformers for railway power substations, transform substations and power supply linear devices

GOST R 58115-2018: Converter transformers for voltages from 6 to 110 kV for railway traction substations. General specifications

Manual: Manual for impulse and low consumption fire extinguishing systems

MI 2418-97: State system for ensuring uniformity of measurements. Classification and application of technical means for testing oil and petroleum products

RD 153-34.0-04.202-98: Procedural Guidelines. Certification of Departments of Energy Facilities Performing Quantitative Chemical Analysis. Organization and Procedure

RD 153-34.1-40.504-00: Procedural Guidelines for Optimal Corrosion Protection of Storage Tanks and Protection of the Water in Them Against Aeration

RD 153-34.1-43.106-2001: Model Guidelines for Acceptance, Storage, and Use of Fireresistant Turbine Oils Type OMTI

RD 34.01.203: Model Index of Operations Documentation for Chemical Shop of a Thermal Power Station

RD 34.43.105-89: Procedural Guidelines for Use of Transformer Oils

RD 34.45-51.300-97: Electrical equipment testing scope and standards.

SanPiN 1.2.681-97: Hygienic requirements for production and safety of perfumes and cosmetics

TU 22-3193-75: Cell air filters of type FN, FNR, FNP, FNP. Technical conditions

TU 38.101821-2001: Turbine oil TP-22C. Technical conditions

PUE: Electrical Installation Rules (PUE). Chapter 1.1 General (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.2 Electricity supply and electrical networks (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.7 Grounding and Electrical Safety Precautions (Seven Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.9 Insulation of electrical installations (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.6 Electric Welding Machines (Seven Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.10. Electrolysis Plants and Plating Plants (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance Test Standards (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.1. General part (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.2. Electricity supply and electrical networks (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.3. Selection of conductors by heating, economic current density and by corona conditions (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.4. Selection of electrical devices and conductors for short circuit conditions (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.5. Electricity metering (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.6. Electrical Measurements (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.7. Grounding and Electrical Safety Precautions (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.1. Electrical Wiring (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.2. Busducts up to 35 kV (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.3. Cable lines with voltage up to 220 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Beginning) (with Amendments and additions) (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.1. Protection of electrical networks with voltage up to 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.2. Relay Protection (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.3. Automation and telemechanics (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 3.4. Secondary Circuits (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.3. Converter substations and installations (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.4. Battery Units (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.1. Electrical machine rooms (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.2. Generators and Synchronous Compensators (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.3. Electric motors and their switching devices (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.4. Crane Electrical Equipment (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.5. Elevator Electrical Equipment (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 5.6. Condensing Units (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical equipment of residential, public, administrative and domestic buildings (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor lighting (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical installations of entertainment enterprises, clubs and sports facilities (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.3. Electrical Installations in Hazardous Areas (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.4. Electrical Installations in Fire Hazardous Zones (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.5. Electrothermal Plants (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.6. Electric welding machines (sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.7. Peat electrical installations (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltages above 1 kV (End) (Sixth edition)

PUE: Electrical Installation Rules (PUE). Applications

PUE: Electrical Installation Rules (PUE). Chapter 6.6. Lighting devices and wiring devices (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.1. General part (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.2. Interior lighting (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.3. Outdoor Lighting (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.4. Advertising Lighting (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 6.5. Lighting fixtures, installation devices (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.1. Electrical Equipment for Residential and Public Buildings (Sixth Edition)

PUE: Electrical Installation Rules (PUE). Chapter 7.2. Electrical equipment for entertainment enterprises, clubs and sports facilities (Sixth edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.4. Overhead power lines with voltage up to 1 kV (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 2.5. Overhead power lines with voltage above 1 kV (Seventh edition) (with Amendment)

PUE: Electrical Installation Rules (PUE). Chapter 4.1. Switchgears up to 1 kV AC and up to 1.5 kV DC (Seventh Edition)

PUE: Electrical Installation Rules (PUE). Chapter 4.2. Switchgears and substations with voltages above 1 kV (Seventh edition)

PUE: Electrical Installation Rules (PUE). Chapter 1.8. Acceptance test standards (Seventh edition)

RD 31.28.52-79: Methods of physico-chemical control of the working environments of ship equipment

RD 34.10.411-89: Ethanol consumption rates for organizations and enterprises of the USSR Ministry of Energy. Part 2

TU 38.1011299-2006: IPM 10 aviation oil

TU 38-101821-83: Turbine oil TP-22C. Technical conditions

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $106.92
High strength rolled steel. General specification
Language: English
Price: $144.54
Cable products. Requirements of fire safety.
Language: English
Price: $90.09
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Seamless steel pipes for boiler plants and pipelines
Language: English
Price: $408.80
Explosive atmospheres. Part 0. Equipment. General requirements
Language: English
Price: $1,118.41
Steel structures
Language: English
Price: $297.00
Loads and actions
Language: English
Price: $495.00
Structural steel structure rolled products. General specifications
Language: English
Price: $120.78
Mechanical reinforcement connections for reinforced concrete structures. Test methods
Language: English
Price: $218.25
Mechanical reinforcement couplers for reinforced concrete structures. Specifications
Language: English
Price: $165.87
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $307.89
Non-electrical equipment for potentially explosive atmospheres. Part 5. Protection by constructional safety «c»
Language: English
Price: $334.65
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Mixtures classification of hazard for health
Language: English
Price: $121.77
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements
Language: English
Price: $524.70

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!