GOST 28759.4-90

ГОСТ 28759.4-90

Steel butt welded flanges of vessels and apparatus for gaskets of octangular sections. Design and dimensions

Фланцы сосудов и аппаратов стальные приварные встык под прокладку восьмиугольного сечения. Конструкция и размеры

Status: Effective

This standard is distributed to the steel butt-weld flanges of vessels and apparatus with a diameter of 400 to 1600 mm with a nominal pressure of 6.3 to 16.0 MPa at a working environment temperature of minus 70 degrees. C to plus 540 degrees. C, intended for work in chemical, petrochemical, oil refining and other industries

Настоящий стандарт распростаняется на стальные приварные встык фланцы сосудов и аппаратов диаметром от 400 до 1600 мм с условным давлением от 6,3 до 16,0 МПа при температуре рабочей среды от минус 70 град. С до плюс 540 град. С, предназначенные для работы в химической, нефтехимической, нефтеперерабатывающей и других отраслях промышленности

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 5

Approved: Gosstandart of the USSR, 11/29/1990

SKU: RUSS51100

Price: $49.47

English keywords: devices; heat exchangers; sizes;



The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 71 Chemical industry »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

Standards for pipe fittings (TPA) » 13. Standards for basic components and parts of injection molding machines » 13.1 Flanges »

Standards for pipe fittings (TPA) » 6. Standards of connecting sizes of piping valves (TPA) » 6.1 Flange connection »

ISO classifier » 71 CHEMICAL INDUSTRY » 71.120 Equipment for chemical industry » 71.120.20 Vertical vessels »

National standards » 71 CHEMICAL INDUSTRY » 71.120 Equipment for chemical industry » 71.120.20 Vertical vessels »

ISO classifier » 71 CHEMICAL INDUSTRY » 71.120 Equipment for chemical industry » 71.120.99 Other chemical industry equipment »

National standards » 71 CHEMICAL INDUSTRY » 71.120 Equipment for chemical industry » 71.120.99 Other chemical industry equipment »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G4 Machinery and equipment for heavy industry » G47 Machines and equipment for chemical industry »


As a Replacement Of:

OST 26-428-79: Flanges of vessels and apparatuses flat steel butt welded for octagonal shaped gasket. Design and dimensions

The Document References:

GOST 28759.1-90: Flanges of vessels and apparatus. Types and parameters

GOST 28759.5-90: Flanges of vessels and apparatuses

GOST 28759.8-90: Metal gaskets of octagonal cross-section

GOST 7.51-98: System of standards on information, librarianship and publishing. Cards for catalogs and card files. Cataloging in the publication. Composition, data structure and publishing design

OST 26-428-79: Flanges of vessels and apparatuses flat steel butt welded for octagonal shaped gasket. Design and dimensions

The Document is Referenced By:

GOST 28759.1-90: Flanges of vessels and apparatus. Types and parameters

GOST 28759.5-90: Flanges of vessels and apparatuses

GOST 28759.8-90: Metal gaskets of octagonal cross-section

GOST 31842-2012: Petroleum and natural gas industries. Shell-and-tube heat eхchangers. Technical requirements

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST R 53677-2009: Petroleum and natural gas industries. Shell-and-tube heat eхchangers. Technical requirements

OST 26-2007-83: Hatches with weld neck flanges, for octagonal cross-section gasket for welded steel vessels and apparatus. Design.

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

RD 26.260.010-2002: The leading document on standardization. The list of standard documentation on standardization on the cells and devices working under pressure.

RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus

SA 03-004-07: Calculation of the strength of vessels and apparatus

TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them

TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell

TU 3612-100-00220302-2005: Shell and tube heat exchangers, tube bundles for them and heat exchangers "pipe in pipe". General technical conditions

TU 3742-011-34390194-2003: Check valves DN 100-1400 PN 8, 0 MPa; PN 12, 5 MPa; PN 16, 0 MPa. Technical conditions

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Aviation turbine fuels. Determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
Language: English
Price: $309.43
Aviation turbine fuel. Determination of acidity
Language: English
Price: $218.25
Petroleum products. Determination of color by Saybolt chromometer
Language: English
Price: $218.25
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Aviation fuels. Calculating net calorific value
Language: English
Price: $179.45
Aviation fuels. Calculating net calorific value
Language: English
Price: $192.06
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Construction in seismic regions of Ukraine
Language: English
Price: $5,909.85
Aviation turbine fuels and kerosine. Determination of smoke point
Language: English
Price: $270.63
Distillate fuels. Determination of free water and particulate contamination by visual inspection method
Language: English
Price: $165.87
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!