GOST 26131-84

ГОСТ 26131-84

Heat-resisting steel forgings. General specifications

Поковки из жаропрочных и жаростойких сплавов. Общие технические условия

Status: Effective. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)

The standard applies to forgings of heat-resistant and heat-resistant alloys produced by forging on presses and used for further processing.

Стандарт распространяется на поковки из жаропрочных и жаростойких сплавов, изготовляемые ковкой на прессах и применяемые для дальнейшего передела.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 12

Approved: USSR State Committee for Standards, 3/27/1984

SKU: RUSS51102

Price: $57.66




The Product is Contained in the Following Classifiers:

Standards for pipe fittings (TPA) » 10. Production » 10.2 Billets (forgings, stampings, rolling, castings, etc.) »

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.1 Metals »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.85 Cast iron and steel forgings »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.85 Cast iron and steel forgings »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V03 Metal forming. Forgings »

National Standards for OKSTU » CAST IRON, FERRO ALLOYS, STEEL » Ingot forgings »


The Document References:

GOST 10145-81: Metals. Stress-rupture test method

GOST 12344-88: Alloyed and high-alloyed steels. Methods of carbon determination

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12345-88: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-81: Steels alloyed and highalloyed. Methods for the determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic

GOST 12358-82: Steels alloyed and highalloyed. Methods for the determination of arsinic

GOST 12359-81: Steels carbon, alloyed and highalloyed. Methods for the determination of nitrogen

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 12361-82: Alloyed and high-alloyed steels. Methods for determination of niobium

GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium

GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium

GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium

GOST 1497-84: Metals. Methods of tension test

GOST 20560-81: Alloy and high-alloy steels. General requirements for methods of analysis

GOST 21120-75: Round and rectangular bars and billets. Ultrasonic testing

GOST 22838-77: Heat-resistant alloys. Methods of testing and estimation of macrostructures

GOST 24018.0-80: Nickel-based fire-resistant alloys. General requirements for methods of analysis

GOST 24018.0-90: Nickel-based high-temperature strong alloys

GOST 24018.1-80: Nickel-based fire-resistant alloys. Methods for the determination of tin

GOST 24018.2-80: Nickel-based fire-resistant alloys. Methods for the determination of antimony

GOST 24018.3-80: Nickel-based fire-resistant alloys. Methods for the determination of lead

GOST 24018.4-80: Nickel-based fire-resistant alloys. Methods for the determination of bismuth

GOST 24018.5-80: Nickel-based fire-resistant alloys. Method for the determination of lead and bismuth

GOST 24018.6-80: Nickel-based fire-resistant alloys. Methods for the determination of arsenic

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 7564-73: Steel. General rules of samples, blanks and test pieces for mechanical and technological tests

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-81: Rolled stock and products for further treatment

GOST 7566-94: Metal products

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9561-76: Panels of reinforced-concrete hollow-core for floors of buildings. Specification

GOST 9561-91: Reinforced concrete multihollow panels for floors in buildings. Specifications

The Document is Referenced By:

MVI.MN 1181-2011: Method for performing measurements of the volume and specific activity of strontium-90, cesium-137 and potassium-40 on the gamma-beta spectrometer MKS-AT1315, the volume and specific activity of gamma-emitting radionuclides cesium-137 and potassium-40 on gamma spectrometer type EL 1309 (

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Hot-rolled sheet. Range
Language: English
Price: $72.27
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Steel structures
Language: English
Price: $297.00
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!