GOST 27484-87
ГОСТ 27484-87
|
|
Fire hazard testing. Test methods. Needle-flame test
Испытания на пожароопасность. Методы испытаний. Испытания горелкой с игольчатым пламенем
Status: Effective - Introduced for the first time. IUS 2-1988
The standard establishes one of the test methods for electrical products and their components for fire hazard.
Стандарт устанавливает один из методов испытаний электротехнических изделий и их компонентов на пожароопасность
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
11/25/1987
SKU: RUSS51249
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
2 Fire and explosion safety of substances, materials and products »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.1 Electric machines, electrical equipment and materials »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.020 Electrical engineering in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.020 Electrical engineering in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E0 General rules and regulations for electrical and heat engineering »
E09 Test methods. Packaging. Marking »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
Control methods (testing, analysis, measurements) »
The Document is Referenced By:
GOST 12.2.042-2013: Occupational safety standards system. Machines and technological equipment for live-stock-raising and forage production. General safety requirements
GOST 12.2.042-91: Occupational safety standards system. Machines and technological equipment for livestock raising and forage production.
GOST 27209.0-89: Electrical thermal equipment. General test methods
GOST 2746-90: Screw holders for electric lamps. General specifications
GOST 27570.01-92: Safety of electrically heated blankets, pads and similar flexible heating appliances for household use. Requirements and test methods
GOST 27570.0-87: Safety of household appliances and similar devices
GOST 27924-88: Fire-hazard testing. Test methods. Bad-connection test with heaters
GOST 28896-91: Fixed capacitors for use in electronic equipment. Part 1. General specifications
GOST 30011.1-2012: Low-voltage switchgear and control gear. Part 1. General rules
GOST 30011.7.1-2012: Low-voltage switchgear and control gear. Part 7. Ancillary equipment. Section 1. Terminal blocks for copper conductors
GOST 30326-95: Safety of information technology equipment included electrical business equipment
GOST 30337-95: Lighting chains. General specifications
GOST 30345.0-95: Safety of household and similar electrical appliances. General requirements
GOST 30824-2002: Production equipment. Metal and wood machining tools. Method of experimental determination of fire breaking-out risk.
GOST 31817.1.1-2012: Alarm systems. Part 1. General requirements. Section 1. General
GOST 32668-2014: Safety relays, relay units and cabinets. General specifications
GOST 33153-2014: Automobile roads of general use. Design of tunnels. General requirements
GOST 33738-2016: Agricultural and forestry machinery with electric drive. General safety requirements
GOST 33897-2016: Railway telecommunications. Safety requirement control methods
GOST 6047-90: General purpose floodlights
GOST 9806-90: Lamp-holders for tubular fluorescent lamps and starter-holders. General specifications
GOST IEC 1048-95: Capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements
GOST IEC 60127-6-2013: Miniature fuses. Part 6. Fuse-holders for miniature fuse-links
GOST IEC 60255-27-2013: Measuring relays and protection equipment. Part 27. Product safety requirements
GOST IEC 60838-1-2011: Miscellaneous lamp holders. Part 1. General requirements and tests
GOST IEC 60920-2012: Ballasts for tubular fluorescent lamps. General and safety requirements
GOST IEC 60922-2002: Devices for lamps. Ballasts for discharge lamps (except tubular fluorescent lamps). General and safety requirements
GOST IEC 60922-2012: Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). General and safety requirements
GOST IEC 60924-2012: D.C. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
GOST IEC 60928-2012: Auxiliaries for lamps. A.C. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
GOST IEC 60947-1-2017: Low-voltage distribution and control equipment. Part 1. General rules
GOST IEC 61046-2012: Auxiliaries for lamps. D.c. or a.c. supplied electronic step-down converters for filament lamps. General and safety requirements
GOST IEC 61048-2011: Auxiliaries for lamps. Capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements
GOST IEC 61184-2011: Bayonet lamp holders
GOST IEC 61204-7-2014: Low-voltage power supplies that produce direct current. Part 7. Safety requirements
GOST IEC 61439-1-2013: Low- voltage switchgear and control gear assemblies. Part 1. General rules
GOST ISO 10079-1-2012: Medical suction equipment. Part 1. Electrically powered suction equipment. General technical requirements and test methods
GOST MEK 60238-2002: Screwed lamp-holder
GOST MEK 730-1-95: Automatic electrical controls for household and similar use. General requirements and test methods
GOST R 1.5-2002: State system for standardization of Russian Federation. Standards. General requirements for structure, drafting, presentation, content and indication
GOST R 1.5-2004: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of structure, drafting, presentation and indication
GOST R 50030.1-2000: Low-voltage switchgear and controlgear. Part 1. General rules and test methods
GOST R 50030.1-2007: Low-voltage switchgear and controlgear. Part 1. General rules
GOST R 50030.2-2010: Low-voltage switchgear and control gear. Part 2. Circuit-breakers
GOST R 50030.7.1-2009: Low-voltage switchgear and control gear. Part 7.1. Ancillary equipment. Terminal blocks for copper conductors
GOST R 50030.7.3-2009: Low-voltage switchgear and control gear. Part 7.3. Ancillary equipment. Safety requirements for fuse terminal blocks
GOST R 50655-94: Lighting chains. General specifications
GOST R 50658-94: Alarm systems. Part 2. Requirements for intruder alarm systems. Section 4. Ultrasonic Doppler detectors for use in buildings
GOST R 50659-94: Alarm systems. Part 2. Requirements for intruder alarm systems. Section 5. Microwave Doppler detectors for use in buildings
GOST R 50775-95: Alarm systems. Part 1. General requirements. Section 1. General
GOST R 51186-98: Alarm sonic passive glass break detectors for use in buildings. General technical requirements and methods of tests
GOST R 51321.1-2007: Low-voltage switchgear and control gear assemblies. Part 1. Type-tested and partially type-tested assemblies. General technical requirements and test methods
GOST R 51558-2000: Television systems of security. General technical requirements and test methods
GOST R 51558-2014: Systems and components of Video surveillance for security applications. Classification. General requirements. Test procedures
GOST R 51838-2012: Safety of machinery. Electrical equipment for industrial machines. Test methods
GOST R 53055-2008: Agricultural and forestry machinery with the electric drive. General safety requirements
GOST R 53312-2009: Devices of protective shutdown. Fire safety requirements. Test methods
GOST R 53314-2009: Electronic products. Fire safety requirements. Test methods
GOST R 53319-2009: Electric heaters for domestic use. Fire safety requirements. Test methods
GOST R 54103-2010: Fire hazard testing. Test methods. Glow-wire test and guidance
GOST R 54958-2012: Railway telecommunications. Safety requirement control methods
GOST R IEC 1007-96: Transformers and inductors for use in electronic and telecommunication equipment. Measuring methods and test procedures
GOST R IEC 1046-98: Auxiliaries for lamps. D.c. or a.c. supplied electronic step-down converters for filament lamps. General and safety requirements
GOST R IEC 1048-94: Capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements
GOST R IEC 127-6-99: Miniature fuses. Part 6. Fuse-holders for miniature cartridge fuse-links
GOST R IEC 335-1-94: Safety of household and similar electrical appliances. General requirements and test methods
GOST R IEC 60238-99: Edison screw lampholders
GOST R IEC 60384-1-2003: Fixed capacitors for use in electronic equipment. Part 1. General specifications
GOST R IEC 60400-99: Lampholders for tubular fluorescent lamps and starter holders
GOST R IEC 60598-1-2003: Luminaires. Part 1. General requirements and test methods
GOST R IEC 60598-1-2011: Luminaires. Part 1. General requirements and test methods
GOST R IEC 60598-1-99: Luminaires. Part 1. General requirements and tests
GOST R IEC 60838-1-2008: Miscellaneous lampholders. Part 1. General requirements and test methods
GOST R IEC 60922-98: Auxiliaries for lamps-ballasts for discharge lamps (excluding tubular fluorescent lamps) - general and safety requirements
GOST R IEC 60950-2002: Safety of information technology equipment
GOST R IEC 61048-2005: Auxiliaries for lamps. Capacitors for use in tubular fluorescent and other discharge lamp circuits. General and safety requirements
GOST R IEC 61084-1-2007: Cable trunking and ducting systems for electrical installations. Part 1. General requirements
GOST R IEC 61184-99: Bayonet lampholders
GOST R IEC 730-1-94: Automatic electrical controls for household and similar use. General requirements and test methods
GOST R IEC 920-97: Ballasts for tubular fluorescent lamps. General and safety requirements
GOST R IEC 926-98: Auxiliaries for lamps. Starting devices (other than glow starters). General and safety requirements
GOST R IEC 928-98: Auxiliaries for lamps. A.c.-supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
GOST R ISO 10079.1-99: Medical suction equipment. Part 1. Electrically powered suction equipment. General technical requirements and test methods
MI 3269-2010: Recommendation. State system for ensuring uniformity of measurements. Construction, presentation, design and content of documents on methods (methods) of measurement
NPB 234-97: Lighting chains. Fire safety requirements. Methods of testings
NPB 235-97: Electroheating devices for household application. Requirements of fire safety and test methods
NPB 243-97*: Residual current devices. Fire safety requirements. Test methods
NPB 247-97: Elektronical products. Requirements fire safety. Test metods
NPB 249-97: Luminaries. Requirements of fire safety. Test methods
NPB 77-98: Fire alarm systems and evacuation management. General technical requirements and test methods
OST 32.146-2000: Devices of railway automation, telemechanics and telecommunications. General specification requirements
R 50-601-21-92: Recommendations. Establishment of product safety requirements in standards and technical conditions
R 50-601-22-92: Recommendations. Establishment of environmental requirements for products in standards and specifications
SP 122.13330.2012: Railway and highway tunnels
STB IEC 60065-2004: Audio, video and similar electronic equipment. Safety requirements
STB IEC 60950-1-2003: Information technologies equipment. Safety. Part 1. General requirements
STB IEC 61347-1-2008: Electronic control gears for lamps. Part 1. General requirements and safety requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
