imgalt

GOST 1405-83

ГОСТ 1405-83

Pinch and wrenching steel bars. Specifications

Ломы стальные строительные. Технические условия

Status: Not effective - Canceled in the Russian Federation. IUS 7-1995

The standard applies to steel scrap used in construction in the manufacture of construction, rigging and other works.

Стандарт распространяется на стальные ломы, применяемые в строительстве при производстве строительно-монтажных, такелажных и других работ.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 3/4/1983

SKU: RUSS51436

Price: $234.00

English keywords: handicraft equipment;


imgalt

The Product is Contained in the Following Classifiers:

ISO classifier » 53 LIFTING AND TRANSPORT EQUIPMENT » 53.120 Handicraft equipment »

National standards » 53 LIFTING AND TRANSPORT EQUIPMENT » 53.120 Handicraft equipment »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh3 Building structures and parts » Zh36 Construction Tools »

National Standards for OKSTU » CONSTRUCTION, ROAD AND UTILITY ENGINEERING PRODUCTS » Construction and finishing machines, construction and assembly tools, manual and mechanized »


As a Replacement Of:

GOST 1405-72: Pinch and wrenching steel bars

The Document References:

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 2.601-68: Unified system for design documentation. Exploitative documents

GOST 2590-88: Round steel bars. Dimensions

GOST 2879-88: Hot-rolled hexagonal steel. Range of sizes

GOST 3282-74: General-purpose low-carbon steel wire. Specifications

GOST 380-88: Common quality carbon steel. Grades

GOST 5631-79: Lacquer BT-577 and paint BT-177. Specifications

GOST 7829-70: Carbon and alloyed steel forgings fabricated by hammer forging. Allowances and tolerances

GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols

GOST 9013-59: Metals. Method of measuring Rockwell hardness

The Document is Referenced By:

K-4-13-1: Standard specification sheet. Assembly of rests

K-4-13-3: Standard specification sheet. Setting the rests with the crane KVL-8

K-4-13-4: Standard specification sheet. Setting the rests with the crane K-162

KT 1.0-6.1-76: Submission of bricks to the workplace of a bricklayer (200 pcs per lift)

KT 1.0-6.2-76: Submission of bricks to the workplace of a bricklayer (400 pcs per lift)

KT 1.0-6.3-76: Delivery of the solution in bins to the work of bricklayers with preliminary mixing

KT 1.5-0.34-76: Submission to the forests of silicate brick in bags without pallets

KT 17.0-14-2-74: Device of cement concrete pavement. Installation rail forms

KT 3.0-3.40-76: Installation of steel order

KT 3.1-1.11-76: Delivery of the solution in tubs to the workplace (without mixing)

KT 3.1-1.14-76: Installation of balcony plates

KT 3.1-1.16-76: Installation of staircases

KT 3.1-1.17-76: Installation of flight of stairs

KT 3.1-1.18-76: Installation of window reinforced concrete lintels

KT 3.1-1.19-76: Installation and temporary fixing of the interroom partitions panels

KT 3.1-1.20-76: Installation of bathroom wall panels

KT 3.1-1.21-76: Installation of eaves slabs combined cover

KT 3.1-1.22-76: Installation of panels combined coating

KT 4.1-15.9-75: Installation of sanitary cabins

KT 4.1-7.20-76: Laying floor slabs

KT 4.1-8.15-75: Installation of concrete pallets for bathrooms

KT 4.1-8.20-75: Installation of partition panels

KT 6.1-14.5-76: Installation of window and door blocks in openings of brick walls

KT 6.1-30.1-76: Installation of hinged panel scaffolding for masonry of the second and third tiers of walls

Manual for SNiP 3.05.01-85: Manual for the production and acceptance of work when installing ventilation and air conditioning systems

RD 31.49.03-85: Maps of unified accessories, tools and pallets for loading and unloading

RD 34.10.102-91: Specified Quantity Allowances for Means of Mechanization, Special Accessories, and Tools for Overhaul of Main Energy Equipment of Thermal Power Stations

RD 34.10.103: Industry-Specific Specified Quantity Allowance for Tools, Equipment, Materials, and Aids for Repair and Rehabilitation of Gas Cleaning Equipment of Thermal Electric Powers

RD 34.10.108-89: Tables of completing the enterprises of electric networks of the USSR Ministry of Energy with small-scale mechanization, devices, rigging equipment, hand tools and devices for repair and maintenance of overhead power lines with a voltage of 0.4-750 kV and cable lines 0.4-35 kV

RD 34.20.504-94: Model Guidelines for Operation of Overhead Electric Power Transmission Lines at Voltage of 35-800 kV

RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

SNiP 5.02.02-86: Standards of construction tools requirements

SO 153-34.10.109-88: Specified Quantity Allowances for Tools, Aids, and Equipment, Power Tools, Hand Tools, and Special Accessories for Repair and Operation of Thermal Power Stations, Hydroelectric Generating Stations, and Electrical and Piped Heat Supply Networks

TTK K-1-20: Arrangement of pile bases for towers of high voltage power lines 35-500 kV

TU 36-2745-85: Scrap steel Technical conditions

VSN 23-95: Instructions for the installation of floors of three-layer parquet boards of type PD-3 (PDP) in rooms of more than 40 m2

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!