GOST 6636-69
ГОСТ 6636-69
|
|
Standard linear dimensions
Основные нормы взаимозаменяемости. Нормальные линейные размеры
Status: Valid - Supersedes
The standard establishes a series of normal linear dimensions in the range from 0.001 to 100,000 mm, intended for use in mechanical engineering and recommended for use in other industries. The standard does not apply to technological interoperative dimensions associated with a calculated dependence with the accepted values of other parameters; on the dimensions established in the standards for specific products; to optimal dimensions, the replacement of which by normal linear dimensions will lead to a decrease in product quality.
Стандарт устанавливает ряды нормальных линейных размеров в диапазоне от 0,001 до 100000 мм, предназначенные для применения в машиностроении и рекомендуемые для использования в других отраслях промышленности. Стандарт не распространяется на технологические межоперационные размеры, связанные расчетной зависимостью с принятыми значениями других параметров; на размеры, установленные в стандартах на конкретные изделия; на оптимальные размеры, замена которых нормальными линейными размерами приведет к снижению качества продукции.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
7/21/1982
SKU: RUSS51501
The Product is Contained in the Following Classifiers:
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.1 General design issues piping valves (TPA) »
8.1.2 Interchangeability and other design requirements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.01 Linear and angular measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.01 Linear and angular measurements in general »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.020 Characterization and design of mechanisms, instruments and equipment »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.020 Characterization and design of mechanisms, instruments and equipment »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G0 General rules and regulations for engineering »
G02 Norms of calculation and design »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
General rules and regulations for mechanical engineering »
As a Replacement Of:
GOST 6636-60: Standard linear dimensions
The Document References:
GOST 6636-60: Standard linear dimensions
GOST 8032-84: Preferred numbers and series of preferred numbers
The Document is Referenced By:
GOST 10172-87: Semiautomatic vertical multitool and copying lathes
GOST 10264-82: Light signaling fittings
GOST 10748-79: Basic norms of interchangeability. Keyed joints with prismatic high keys. Dimensions of keys and keyways. Tolerances and fits
GOST 1105-74: Shapers. Basic dimensions
GOST 1141-74: Slotters. Basic dimensions
GOST 11654-90: External grinding machines. Basic parameters and dimensions. Accuracy standards
GOST 12126-86: Small power electric machines. Mounting dimensions
GOST 12447-80: Hydraulic and pneumatic drives and lubricating systems. Standard diameters
GOST 13135-90: Surface grinders with rectangular table. Basic dimensions. Standards of accuracy
GOST 13268-88: Tubular electric heaters
GOST 13281-93: Shaving machines. Basic dimensions. Standards of accuracy and rigidity
GOST 14-88: Surface grinders with circular table and horizontal spindle. Basic dimensions. Standards of accuracy
GOST 1574-91: Metal-cutting machine tools. Machined T - slots. Dimensions
GOST 16015-91: Semiautomatic horizontal broaching machines. Basic parameters and dimensions. Standards of accuracy and rigidity
GOST 16025-91: Semiautomatic vertical broaching machines. Basic parameters and dimensions. Standards of accuracy and rigidity
GOST 16030-70: Square and oblong through holes for fasteners. Shape and dimensions
GOST 16461-93: Slide units for modular type machine tools. Basic dimensions. Standards of accuracy
GOST 16516-80: Hydraulic and pneumatic drives and lubricating systems. Conventional passages
GOST 165-81: Milling cantilevered machines. Basic dimensions
GOST 16775-93: Plain snap gauges with cemented carbide alloy plates for diameters from 3 to 180 mm. Dimensions
GOST 16778-93: Plain plug gauges with cemented carbide alloy for diameters from 1 to 6 mm. Dimensions
GOST 16811-71: Scales platform stationary for the metallurgical industry. Types and main parameters
GOST 17696-89: Globoid gears. Calculation of geometry
GOST 18065-91: Horizontal gear-hobbing machines for spur gears. Basic parameters and dimensions. Standards of accuracy
GOST 18097-93: Screw-cutting lathes and lathes. Basic dimensions. Standards of accuracy
GOST 18125-72: Hexagon reduced head bolts with thread diameter over 48 mm (product grades A and B). Design and dimensions
GOST 18139-72: Multi-spindle chuck vertical semiautomatic lathes. Basic dimensions
GOST 18358-93: Plain snap-gauges for diameters from 1 to 6 mm. Dimensions
GOST 18360-93: Plate snap-gauges for diameters from 3 to 260 mm. Dimensions
GOST 18365-93: Plate snap-gauges with changeable lips for diameters over 100 to 360 mm. Dimensions
GOST 18367-93: Pressed snap-gauges for diameters over 10 to 180 mm. Dimensions
GOST 19354-74: Shaft line flange joints. Construction and dimensions
GOST 19468-81: Unit-type machines. Basic dimensions
GOST 2.307-2011: Unified system for design documentation. Drawing of dimensions and limit deviations
GOST 2.307-68: Unified system for design documentation. Drawing of dimensions and limit deviations
GOST 20551-93: Electrical-discharge machines. Basic dimensions. Standards of accuracy
GOST 21721-76: Horizontal hobbing machines for cylindrical fine-pitch gears. Basic dimensions
GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
GOST 2185-66: Spur gears. Basic parameters
GOST 22174-76: Variable non-wire resistors. Bodies. Basic dimensions
GOST 22940-85: Mine exploratory underground drifts. Dimensions of sections
GOST 23055-78: Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results
GOST 23330-85: Universal tool milling machines. Basic dimensions
GOST 23360-78: Basic norms of interchangeability. Keys couplings with prismatic Keys. Keys dimensions and Keyways sections. Limits and fits
GOST 24068-80: Basic norms of interchangeability. Keyed joints with taper keys. Dimensions of keys and keyways. Tolerances and fits
GOST 24379.1-2012: Foundation bolts. Structure and dimensions
GOST 24379.1-80: Foundation bolts. Structure and dimensions
GOST 24469-80: Instruments for measurements of laser radiation parameters
GOST 24754-2013: Mining electrical equipment of normal production. General technical requirements and test methods
GOST 24754-81: General purpose mining electric equipment
GOST 24772-81: Electrochemical copy-piercing machines. Basic dimensions
GOST 24788-81: Enameled steel kitchen utensils.
GOST 25247-82: Pushbutton switches and indicating lights low voltage. Overall and fixing dimensions
GOST 25301-95: Cylindrical reducing gears. Parameters
GOST 25-90: Internal grinding machines. Basic parameters and dimensions. Accuracy standards
GOST 25939-83: Floor-mounted flexible vehicles. Series of main parameters
GOST 26218-84: Reducers and harmonic reduction geared motors. Main characteristics
GOST 26342-84: Means of alarm, fire and alarm-fire systems. Types, basic parameters and dimensions.
GOST 26447-85: Rocks. Method for determination of mechanical properties for unconfined compressive strength of clay rocks
GOST 26575-85: Cylindrical throuch holes for installation of electric radio elements. Dimensions
GOST 27142-97: Bevel and bevel-cylindrical reducing gears. Parameters
GOST 27218-87: Flexible manufacturing modules and machining centres. Work holding pallets. Basic and coupling dimensions
GOST 27491-87: Drilling-milling-boring flexible manufacturing modules and machining centres. Main parameters and sizes
GOST 27797-88: Flexible manufacturing systems. Flexible manufacturing modules for grinding rotational parts. Main parameters and dimensions
GOST 27-88: Surface grinders with circular sliding table and vertical spindle. Basic dimensions. Standards of accuracy and rigidity
GOST 28354-89: FMS. Flexible turning cells. Main parameters and dimensions
GOST 28699-90: Wood-cutting tool. Cylinder shanks. Types and basic dimensions
GOST 28733-90: Chip disposal conveyors
GOST 29175-91: Thin parallel keys and their corresponding keyways. Dimensions and tolerances
GOST 29281-92: Shipboard machines and foundations. Mounting dimensions
GOST 2930-62: Measuring instruments. Characters and signs
GOST 30175-94: Jig boring and jig grinding machines. Basic dimensions
GOST 31.0151.01-90: Universal and special-purpose setters
GOST 31.121.41-84: Elements and assemblies of universal built-up and readjusted equipment for metal-cutting machines (ubre)
GOST 31178-2003: Jet-abrasive machine tools. Types and basic dimensions
GOST 3179-72: Turret Lathes. Basic dimensions
GOST 370-93: Vertical drilling machines. Basic dimensions. Standards of accuracy and rigidity
GOST 3933-75: Still photo and movie camera lenses. Joined dimensions for accessories
GOST 439-73: Planers. Basic dimensions
GOST 44-93: Yertical turret lathes. Basic parameters and dimensions
GOST 5260-75: Cast iron handwheels for pipeline armature. Types, basic dimensions and technical requirements
GOST 6282-88: Plate crank shears with inclined blade. Parameters and dimensions. Norms of accuracy
GOST 659-89: Cylindrical gear hobbers with vertical work axis. Basic parameters and dimensions. Standards of accuracy
GOST 6616-94: Thermoelectric converters. General specifications
GOST 6651-94: Thermal converters of resistance. General technical requirements and test methods
GOST 6728-91: Thred-grinding machines. Main parameters and dimensions
GOST 7713-62: Limits and fits. Basic definitions
GOST 8693-80: Metal pipes. Method of flange testing
GOST 8838-81: Shaftline conical joints. Types, construction and dimensions
GOST 9066-75: Studs for flanged connections with medium temperature 0 °C to 650 °C. Types and main dimensions
GOST 9369-77: Globoid gear pairs. Basic parameters
GOST 9726-89: Vertical milling machines with compound table. Terminology. Basic dimensions. Standards of accuracy and rigidity
GOST 9886-73: Semi-automatic horizontal two-sided machine-tool for face-milling and cantering. Basic dimensions
GOST R 50353-92: Resistive temperature transducers. General specifications
GOST R 50536-93: Basic requirements for interchangeability. Thin taper keys with and without gib head and their corresponding keyways. Dimensions and tolerances
GOST R 53836-2010: Automobile engines. Thin-walled liners of main and connecting rod bearings. Technical requirements and test methods
GOST R 56296-2014: Metal gate devices for explosives facility sites. Technical requirements and strength assessment
GOST R 58942-2020: A system for ensuring the accuracy of geometric parameters in construction. Technological tolerances
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 24.691.02-84: connecting flanges for heating system of passenger wagons.Types, Design and dimensions.
OST 36-42-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Curved bends. Construction and dimensions.
OST 37.001.045-82: Thin-walled main and connecting rod bearings of automobile engines. General Specifications.
OST 4 G0.059.292: Packages of removable molds for pressing products from thermosets. Design Guide
PR 50.2.023-2000: State System of Measuring Uniformity Provision. Testing procedures for validation of the type of gambling machines and establishing control of their conformity to the approved type
R 50.2.094-2013: State system for ensuring the uniformity of measurements. The methodology of the metrological examination of the technical regulations of the Customs Union
R 50-116-90: Recommendations. Hot rolled steel and bent rolled steel profiles. Unified profile mix
RD 24.207.08-90: Pipe fittings. Running threaded pairs. Main dimensions and technical requirements. Recommendations for use
RD 31.00.87-85: Specifications. Rules of construction, presentation and design. The procedure for approval, approval and registration
RD 50-632-87: Guidelines. Unification of products. Construction of parametric and standard series of parts and assembly units of general engineering application
RDMU 80-76: Guidelines for designing sheet metal stamping for separation operations
RST RSFSR 643-80: Black steel economic dishes . General specifications
ST TsKBA 060-2008: Pipe fittings. Running threaded pairs. Main dimensions, technical requirements
ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions
TU 25.12.30-77: Inserts cut from emerald grown for jewelry. Technical conditions
Customers Who Viewed This Item Also Viewed:
 |
Petroleum for oil-processing plants. Specifications
Language: English |
Industrial gas burners. General technical requirements
Language: English |
Electrical articles. General requirement for environment mechanical stability
Language: English |
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English |
Power transformer on-load tap-changing devices. General specifications
Language: English |
Conical pipe thread. Profile, basic dimensions and tolerances
Language: English |
Glass and glass products. Visual faults. Terms and definitions
Language: English |
Industrial gas burners. Test methods
Language: English |
Glass and glass products. Inspection methods for geometric parameters and appearance
Language: English |
Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
Language: English |
Crude petroleum. General specifications
Language: English |
Power transformers. Test methods of tap changing devices
Language: English |
Unified system for design documentation. Stages of designing
Language: English |
White sugar. Specifications
Language: English |
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English |
Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
Language: English |
Guidelines for the photometric determination of hydrogen sulfide in the air
Language: English |
Tempered glass. Specifications.
Language: English |
Glass with low emissivity hard coating. Specifications.
Language: English |
Glass laminated. Specifications.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.