GOST 11284-75
ГОСТ 11284-75
|
|
Through holes for fasteners. Dimensions
Отверстия сквозные под крепежные детали. Размеры
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)
The standard establishes the dimensions of through holes for bolts, screws, studs and rivets with rod diameters from 1.0 to 160 mm used to connect parts with gaps.
Стандарт устанавливает размеры сквозных отверстий под болты, винты, шпильки и заклепки с диаметрами стержней от 1,0 до 160 мм, применяемых для соединения деталей с зазорами.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
11/14/1975
SKU: RUSS51534
The Product is Contained in the Following Classifiers:
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.1 General design issues piping valves (TPA) »
8.1.2 Interchangeability and other design requirements »
Standards for pipe fittings (TPA) »
13. Standards for basic components and parts of injection molding machines »
13.2 Fasteners »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.01 Fasteners in general »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.01 Fasteners in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G3 Fasteners for general engineering applications »
G30 Classification, nomenclature and general rules »
As a Replacement Of:
GOST 11284-65: Through holes for fasteners. Dimensions
The Document is Referenced By:
GOST 10304-80: Rivets
GOST 12.2.036-78: Press moulds for mechanical-rubber articles
GOST 12126-86: Small power electric machines. Mounting dimensions
GOST 12218-66: Holding devices. Washers enlarges. Design and sizes
GOST 12460-67: Nuts with lock screws. Design
GOST 12644-80: Hollow and semi-hollow rivets. Specifications
GOST 12876-67: Bearing surface under fasteners. Dimensions
GOST 12943-67: Washers for machine retaining device. Design and dimensions
GOST 14901-93: Moulds for the manufacture of industrial rubber articles
GOST 16162-78: Reducers of general usage. General specifications
GOST 16162-85: Standard reducers. General specifications
GOST 16561-76: Metal accessories for wood containers. Specifications
GOST 1759.1-82: Bolts, screws, studs and nuts. Tolerance, monitoring methods of dimensions and deviations of shape and surface orientation
GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods
GOST 1759.5-87: Nuts. Mechanical properties and test methods
GOST 20746-84: Vice for precision machining
GOST 20804-81: Profiles bent and stripes perforated of steel for wiring. General specifications
GOST 21087-75: Metal casting patterns. Technical requirements
GOST 22627-77: Tapping chucks for turret-lathes. Design and dimensions
GOST 22668-77: Cable terminals and sleeves. Basic dimensions
GOST 23751-86: Printed circuit boards. Basic parameters of structure
GOST 25570-82: Hatch covers of tank for petroleum products. Types, main parameters and dimensions
GOST 26153-84: One-column dividing stands
GOST 26234-84: Head-type jig replaceable bushing of with standard and enhanced accuracy. Design and Dimensions
GOST 26258-87: Counterbores designed for working bearing surfaces under fastenings. Specifications
GOST 26259-87: Cuides. Design and dimensions
GOST 26546-85: Chain variators. General specifications
GOST 26575-85: Cylindrical throuch holes for installation of electric radio elements. Dimensions
GOST 26957-86: Variator with wide angle belt pulleys. General specifications
GOST 26957-97: Variators with wide-angle belt pulleys. General specifications
GOST 27358-87: Press moulds for manufacturing of plastic items
GOST 28319-89: Subland twist drills for holes to screw with fillister head. Basic dimensions
GOST 28331-89: Industrial aggregate-module robots. Acting modules. Connecting dimensions
GOST 28961-91: Plain washers for metric bolts, screws and nuts. General plan
GOST 29281-92: Shipboard machines and foundations. Mounting dimensions
GOST 30222-95: Cone variable speed drives. General specifications
GOST 30362.1-96: Hydraulic fluid power. Single rod cylinders for nominal pressure of 25 MPa. Mounting dimensions
GOST 30852.0-2002: Explosionproof electrical apparatus. Part 0. General requirements
GOST 31.0151.01-90: Universal and special-purpose setters
GOST 31.0171.01-91: Devices for metal cutting machine tools. Parts and assembly units of general application. General technical requirements
GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines
GOST 31284-2004: Air heaters for industrial and agricultural enterprises. General specifications.
GOST 31592-2012: Machine reducers. General specifications
GOST 31610.0-2012: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements
GOST 31610.0-2014: Explosive atmospheres. Part 0. Equipment. General requirements
GOST 34600-2019: Operational and service vehicles for patrolling and going to the scene of the outfits of duty units of law enforcement agencies. Technical requirements
GOST 34937-2023: Riveted connections for railway cars. Technical requirements
GOST 8592-79: Rotating electrical machines. Mounting and connecting dimensions. Tolerances and control methods
GOST 9650-80: Pins. Specifications
GOST ISO 16047-2015: Fasteners. Torque/clamp force testing
GOST ISO 2320-2015: Prevailing torque type steel nuts. Mechanical and performance properties
GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch
GOST ISO 8992-2015: Fasteners. General requirements for bolts, screws, studs and nuts
GOST R 50891-96: Machine reducers. General specifications
GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements
GOST R 52350.0-2005: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements
GOST R 52627-2006: Bolts, screws and studs. Mechanical properties and test methods
GOST R 53429-2009: Printed circuit boards. Basic parameters of structure
GOST R 53817-2010: Vehicles. Telescopic single acting hydraulic cylinders. Technical requirements and test methods
GOST R 55740-2013: Steel bolts, screws and studs with adhesive coating. Technical requirements
GOST R 55741-2013: Steel bolts, screws and studs with locking coating. Technical requirements
GOST R 57054-2016: Mining equipment. Tubing cast iron. Sets of tubing rings. General specifications
GOST R IEC 60079-0-2007: Explosive atmospheres. Part 0. Equipment. General requirements
GOST R IEC 60079-0-2011: Explosive atmospheres. Part 0. Equipment. General requirements
GOST R ISO 15330-2010: Fasteners. Preloading test for the detection of hydrogen embrittlement. Parallel bearing surface method
GOST R ISO 16047-2009: Fasteners. Torque/clamp force testing
GOST R ISO 8992-2011: Fasteners. General requirements for bolts, screws, studs and nuts
OST 26.260.758-2003: Metal structures. General technical requirements.
OST 26-07-2024-80: Distinguishing plates. Dimensions. Technical requirements.
OST 34-13-017-88: The rivet is combined. Design and dimensions. Technical requirements
OST 35-02-72: High-strength bolts, nuts and washers for them.
OST 4 G0.059.292: Packages of removable molds for pressing products from thermosets. Design Guide
OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 37.001.131-89: Tightening threaded connections. Tightening standards and specifications
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
SP 470.1325800.2019: Steel structures. Work Rules
ST TsKBA 076-2009: Pipe fittings. Distinctive signs. Types, sizes and specifications
STB 1679-2006: Cultivators for inter-row tillage. General specifications
VSN 361-85: Installation of Process Equipment on Foundations
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.