GOST 6211-81

ГОСТ 6211-81

Conical pipe thread. Profile, basic dimensions and tolerances

Основные нормы взаимозаменяемости. Резьба трубная коническая

Status: Effective. The limitation of effectiveness period has been lifted: Protocol No. 7 of the CIS MGS dated 01.03.95

The standard applies to pipe tapered threads with a taper of 1:16, used in tapered threaded connections, as well as to external tapered threads with an internal cylindrical thread with a profile according to GOST 6357-81 and establishes the profile, main dimensions and tolerances of the internal pipe cylindrical thread connected with outer conical.

Стандарт распространяется на трубную коническую резьбу с конусностью 1:16, применяемую в конических резьбовых соединениях, а также в соединениях наружной конической резьбы с внутренней цилиндрической резьбой с профилем по ГОСТ 6357-81 и устанавливает профиль, основные размеры и допуски внутренней трубной цилиндрической резьбы, соединяемой с наружной конической.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 12/30/1981

SKU: RUSS51571

Price: $71.00

English keywords: special threads;



The Product is Contained in the Following Classifiers:

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.1 General design issues piping valves (TPA) » 8.1.2 Interchangeability and other design requirements »

ISO classifier » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.040 Screw threads » 21.040.30 Special threads »

National standards » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.040 Screw Threads » 21.040.30 Special threads »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G13 Threads »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Detachable connections (threads, keys, splines, etc.) »


As a Replacement Of:

GOST 6211-69: Taper pipe thread. Cross-section, main dimensions and allowances

The Document References:

GOST 6357-81: Basic norms of interchangeability pipe cylindrical thread

The Document is Referenced By:

ATK 24.203.04-90: Pipeline connections with flanging of copper tubes. Types, dimensions and technical requirements

ATK 26-18-11-96: The union screw and checkpoints. Design, dimensions and general technical requirements

GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers

GOST 11700-80: Two-line lubricating stations. Specifications

GOST 12853-80: Positive-displacement hydraulic drives, pneumatic actuators and lubricating systems. Connecting threads

GOST 14630-80: Fire water sprinklers and drenchers

GOST 19090-93: Taps for pipe cylindrical thread. Tolerances

GOST 21204-97: Industrial gas burners. General technical requirements

GOST 21349-75: Bars for threading pipe taper screw thread. Diameters

GOST 21350-75: Holes for threading pipe taper screw thread. Diameters

GOST 25148-82: Stationary dental units

GOST 25573-82: Freight handling rope slings for construction

GOST 26350-84: Tube connections and fittings. Connecting threads. Series

GOST 27441-87: Gas apparatuses for thermal treatment of food for the plants of public catering classification, general technical requirements and test methods

GOST 30526-97: Pneumatic fluid power. Compressed air dryers. General technical requirements and test methods

GOST 31.0171.01-91: Devices for metal cutting machine tools. Parts and assembly units of general application. General technical requirements

GOST 31850-2012: Automatic forced draught burners for gaseous fuels. Technical requirements, requirements of safety and test methods

GOST 32028-2012: Automatic shut-off valves for gas burners and gas appliances. General technical requirements and test methods

GOST 32029-2012: Mechanical thermostats (thermoregulators) for gas appliances. General technical requirements and test methods

GOST 32032-2013: Taps for gas burning appliances. General technical requirements and test methods

GOST 32441-2013: Specifications for dedicated liquefied petroleum gas appliances. Flueless non-domestic space heaters not exceeding 10 kW

GOST 32445-2013: Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products. The general technical requirements and test methods

GOST 32447-2013: Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases

GOST 32451-2013: Open fronted gas-fired independend space heaters

GOST 32585-2013: Fittings-adapters from copper and copper alloys for connecting of pipelines. Specifications

GOST 32601-2022: Centrifugal pumps for oil, petrochemical and gas industry. General technical requirements

GOST 33008-2014: Fireplaces, fireplace inserts, for solid fuels. Requirements and methods of testing

GOST 33009.1-2014: Gas boilers of central heating. Part 1. Specifications and test methods.

GOST 33011-2014: Gas boilers of central heating. Boilers type c with a nominal heat output of more than 70 kW but not more than 1000 kW. Classification, requirements, test methods and labeling

GOST 33013-2014: Room heaters, working on solid fuel. Requirements and test methods

GOST 33014-2014: Heating boilers for solid fuels. Requirements and methods of testing

GOST 33015-2014: Heating Boilers for solid fuel nominal thermal power up to 50 kW. Requirements and methods of testing

GOST 33016-2014: Boilers for solid fuel with manual and automatic loading of the rated capacity of up to 500 kW. Terminology, requirements, test methods and labeling

GOST 33856-2016: Pipe fittings. Fire Test Method

GOST 34293-2017: Pipeline valves. Metal ball valves for petroleum, petrochemical and allied industries. General specifications

GOST 6111-52: Conical pipe thread. Profile, basic dimensions and tolerances

GOST 6226-71: 1:16 Taper thread reamers. Design and dimensions

GOST 6227-80: Taper-thread taps

GOST 6228-80: Round screw dies for taper thread

GOST 6357-81: Basic norms of interchangeability pipe cylindrical thread

GOST 6911-71: Dual-line feeders for centralized lubricating systems. Specifications

GOST 6918-81: Line screen grease strainers. Specifications

GOST 7157-79: Gauges for pine taper thread. Types. Basic dimensions and tolerances

GOST IEC 62841-2-9-2016: Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety and test methods. Part 2-9. Particular requirements for hand-held tappers and threaders

GOST R 50449-92: Taps for pipe cylindrical thread. Tolerances

GOST R 50561-93: Hexagonal dienuts. Dimensions

GOST R 51043-2002: Аutomatic water and foam fire fighting systems. Sprinklers, spray nozzles and water mist nozzles. General technical requirements. Test methods

GOST R 51382-2011: Heating boilers. Part 4. Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with output up to 70 kW and maximum operating pressure of 0,3 MPa. Terminology, special requirements, test methods and marking

GOST R 51383-2012: Automatic burner gas forced air. Technical safety requirements and test methods

GOST R 51842-2001: Automatic shut-off valves for gas burners and gas appliances. General technical requirements and test methods

GOST R 51843-2001: Flame supervision devices for gas burning appliances. Thermo-electric flame supervision devices. General technical requirements and test methods

GOST R 51843-2013: Flame supervision devices for gas burning appliances. Thermo-electric flame supervision devices

GOST R 51983-2002: Multifunctional controls for gas burning appliances. General technical requirements and test methods

GOST R 52057-2003: Taps for gas burning appliances. General technical requirements and test methods

GOST R 52209-2004: Hose assemblies for gas burners and gas appliances. General technical requirements and test methods

GOST R 52949-2008: Fittings-adapters from copper and copper alloys for connecting the pipelines. Specifications

GOST R 53634-2009: Gas-fired central heating boilers, type B boilers, of nominal heat input exceeding 70 kW, but not exceeding 300 kW. General technical requirements and test methods

GOST R 53635-2009: Gas-fired air heaters with forced convection for firing (heating) rooms not exceeding a net heat input of 100 kW. General technical requirements and test methods

GOST R 54438-2011: Gas-fired central heating boilers. Additional requirements for the domestic water heaters jointly with boilers of nominal heat input not exceeding 70 kW

GOST R 54439-2011: Gas fired central heating boilers. Type B boilers of nominal heat input not exceeding 300 kW, but not exceeding 1000 kW

GOST R 54440-2011: Heating boilers. Part 1. Heating boilers with forced draught burners. Terminology, general requirements, test and marking

GOST R 54446-2011: Non domestic gas-fired overhead luminous radiant heaters. Part 1. Safety requirements

GOST R 54448-2011: Single burner gas-fired overhead radiant tube heaters for non-domestic use. Part 1. Safety requirements

GOST R 54788-2011: Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW. Part 1. Safety

GOST R 54806-2011: Centrifugal pumps. Technical specifications. Class I

GOST R 54819-2011: Domestic heaters dedicated for liquefied petroleum gases, not connected to a chimney

GOST R 54821-2011: Gas-fired storage water heaters for the production of domestic hot water

GOST R 54822-2011: Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW. General technical requirements and test methods

GOST R 54826-2011: Gas-fired central heating boilers. Type C boilers of nominal heat input not exceeding 70 kW

GOST R 55202-2012: Gas-fired mixing air heaters for heating greenhouses and similar non-domestic spaces

GOST R 55203-2012: Gas-fired air heaters with air-flue gases mixing with forced convection for heating non-domestic premises nominal heat output of up to 300 kW

GOST R 55204-2012: Non-domestic gas-fired convective air heaters, incorporating a fan to transportation of combustion air or combustion products, nominal heat output of up to 300 kW

GOST R 58095.1-2018: Gas distribution systems. Requirements for gas consumption networks. Part 1. Steel gas pipelines

GOST R 58121.3-2018: Plastic pipings for the supply of gaseous fuels. Polyethylene (PE). Part 3. Fittings

GOST R 58423-2019: Gas pressure regulators for inlet pressure not higher than 10 MPa

GOST R 58753-2019: Cargo rope slings for construction. Technical specifications

GOST R EN 257-2004: Mechanical thermostats (thermoregulators) for gas appliances. General technical requirements and test methods

GOST R IEC 60079-1-2008: Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures 'd'

IM 14-7-2004: Automation. Instruments for measuring and regulating temperature. Part 2. Thermometers, alarms, indicators, frames, temperature relays, devices are different. Nomenclature directory

OST 26.260.472-2000: devices for installation of pressure gauges and pressure selection. General technical requirements.

PNST 208-2017: Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery. Safety. Particular requirements for transportable threading machines

SNiP III-34-74: Automation Systems

Customers Who Viewed This Item Also Viewed:

Ball valves and disk gate valves. End-to-end (face-to-face) dimensions
Language: English
Price: $28.00
Safety valves of stream and hot-water boilers. Technical requirements
Language: English
Price: $58.00
Industrial gas burners. General technical requirements
Language: English
Price: $152.00
Petroleum and natural gas industries. Shell-and-tube heat eхchangers. Technical requirements
Language: English
Price: $177.00
Straight and diamond knurl. Form and basic dimensions
Language: English
Price: $76.00
Industrial gas burners. Test methods
Language: English
Price: $204.00
Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications
Language: English
Price: $142.00
White sugar. Specifications
Language: English
Price: $279.00
Pipeline valves. Methods of control and testing
Language: English
Price: $246.00
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $215.00
Pipeline valves. Leakage rates of valves
Language: English
Price: $175.00
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English
Price: $104.00
Graphite electrodes and nipples. Specifications
Language: English
Price: $279.00
Welded steel pipes for gas and oil pipelines. Technical specifications
Language: English
Price: $90.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!