GOST 22266-76
ГОСТ 22266-76
|
|
Sulphate resisting cements. Specifications
Цементы сульфатостойкие. Технические условия
Status: Not effective - Superseded. IUS 11-1995
The standard applies to sulfate-resistant cements manufactured on the basis of Portland cement clinker and intended for the manufacture of concrete and reinforced concrete structures that are corrosion resistant when exposed to media that are aggressive in the content of sulfates
Стандарт распространяется на сульфатостойкие цементы, изготовляемые на основе портландцементного клинкера и предназначенные для изготовления бетонных и железобетонных конструкций, обладающих коррозионной стойкостью при воздействии сред, агрессивных по содержанию в них сульфатов
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of the Council of Ministers of the USSR for Construction,
12/14/1976
SKU: RUSS51792
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.61 Mineral binders »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.10 Cement. Gypsum. Lime. Building mixture »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.10 Cement. Gypsum. Lime. Building mixture »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh12 Cementing materials »
National Standards for OKSTU »
CONSTRUCTION MATERIALS, EXCEPT REFINED CONCRETE STRUCTURES AND PARTS »
Cement »
The Document is Replaced With:
GOST 22266-94: Sulphate-resistant cements. Specifications
As a Replacement Of:
GOST 10178-62: Portland cement slag, pozzolanic Portland cement and their varieties
GOST 5.2138-73: Portland cement, sulfate-resistant. Quality requirements for certified products
The Document References:
GOST 22236-76: Cements. Rules of acceptance
GOST 22236-85: Cements. Rules of acceptance
GOST 22237-76: Cements. Packing, labelling, transport and storage
GOST 22237-85: Cements. Packing, labelling, transport and storage
GOST 310.1-76: Cements. Test methods
GOST 310.2-76: Cements. Methods of grinding fineness determination
GOST 310.3-76: Cements. Methods of tests consistency, times of settining and of soundness
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 310.5-88: Cements. Test method for heat of hydration
GOST 3476-74: Slags domain and electrothermophosphoric granulated for the production of cements
GOST 3584-73: Wire mesh woven with square check and high precision. Specification
GOST 4013-82: Gypsum and gypsum-anhydrite rock for the manufacture of binders. Specifications
GOST 5382-73: Cements. Chemical testing methods
The Document is Referenced By:
GOST 19222-84: Arbolit and its products. General specifications
GOST 21509-76: Reinforced concrete shoots for irrigation systems. Specifications
GOST 22266-94: Sulphate-resistant cements. Specifications
GOST 23464-79: Cements classification
GOST 24893.0-81: Reinforced concrete frame brace for industrial buildings. Specifications
GOST 25820-83: Lightweight concrete. Specifications
GOST 26633-85: Heavy-weight and sand concretes. Specifications
GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures
GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST 6133-84: Concrete wall stone. Specifications
GOST 6786-80: Reinforced concrete parapet slabs for production buildings. Specifications
Manual for SNiP 2.03.11-85: A manual for monitoring the state of building metal structures of buildings and structures in aggressive environments, conducting surveys and designing the restoration of corrosion protection of structures
Manual for SNiP 2.03.11-85: Designer's Guide to Corrosion Protection for Concrete and Reinforced Concrete Structures
Manual for SNiP 2.03.11-85: Manual on the design of corrosion protection for stone, reinforced stone and asbestos-cement structures
Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities
Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction
Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP
Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems
Manual for SNiP 2.04.02-84: Cooling Tower Design Guide
Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment
Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants
Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems
Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks
Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)
Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083
Manual for SNiP 3.06.03-85: Manual for the construction of asphalt concrete pavements and foundations of roads and airfields
Manual for SNiP 3.06.03-85: Manual for surface treatment on roads
Manual for SNiP 3.06.03-85: Manual on the construction of coatings and foundations of roads and airfields from soils reinforced with cementing materials to SNiP 3.06.03-85 and SNiP 3.06.06-88
Manual for SNiP 3.06.03-85: Manual for the preparation and use of bitumen road emulsions
Manual for SNiP 3.07.02-87: Allowance for the production and acceptance of work during the construction of new, reconstruction and expansion of existing hydrotechnical sea and river transport facilities
Manual for SNiP 3.09.01-85: Manual on the use of chemical additives in the production of precast concrete structures and products
Manual for SNiP 3.09.01-85: Manual for the heat treatment of precast concrete structures and products
Manual for SNiP 3.09.01-85: The technology of manufacturing reinforced concrete pressure pipes with a steel core
Manual for SNiP 3.09.01-85: Manual for the heat treatment of reinforced concrete products with natural gas combustion products
Manual for SNiP 3.09.01-85: Production of prefabricated self-reinforced concrete structures and products
Manual for SNiP 3.09.01-85: Reinforced concrete molding technology manual
Manual for SNiP 3.09.01-85: Manual for heliothermal processing of concrete and reinforced concrete products using SVITAP coatings
Manual for SNiP 3.09.01-85: Manual for heliothermal treatment of concrete and reinforced concrete products using film-forming compounds
OSN-APK 2.10.03.001-04: Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments
P 76-2000: Handbook for the design of concrete compositions for wear-resistant facings of hydraulic structures
R 392-80: Recommendations on the composition and technology of the preparation of very heavy concrete for pipeline weights
R 589-86: Recommendations for ballasting of pipelines at underwater crossings
RD 12.13.055-87: Instructions for the preparation and use of concrete and mortar for mining coal mines
RD 153-34.2-21.544-2002: Guidelines for the chemical control of corrosion processes in water filtration through concrete and reinforced concrete hydraulic structures
RD 34.22.301-88: Procedural Guidelines for Field Inspections of Reinforced Concrete Shells of Cooling Towers
RD 34.22.402-94: Typical instructions for the acceptance and operation of tower towers
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RSN-88: Design and Construction of Roads and Highways in Non-Chernozem Areas of the RSFSR
SN 549-82: Guidelines for the Design, Fabrication, and Application of Structures and Products Made of Organic Fiber Reinforced Concrete (Arbolite)
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.06.04-91: Bridges and pipes
SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production
SNiP 5.01.23-83: Standard cement consumption rates for the preparation of precast concrete and monolithic concrete, reinforced concrete products and structures
TSN 50-303-99: Design and Installation of Shallow Foundations for Low-Rise Dwellings in the Moscow Region
TU 102-79: Concrete belt weighting compounds type UE for main pipelines
TU 34-12-11410-89: Racks of reinforced concrete CB95-1, CB95-1-a, CB95-2, CB95-2-a
VSN 212-91: Use of Natural-Porous-Aggregate Concrete in Transportation Tunnel Construction
VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III
VSN 48-93: Installation Manual for Cast-In-Place Concrete and Reinforced Concrete Tunnel Lining for Transportation Tunnels
VSN 83-92: Technical instructions for the use of concrete and cement-sand mortars hardening in the frost, in the construction of artificial structures
VSN-1-90: Technological rules for the manufacture of centrifuged racks of contact network supports, communication lines and self-locking
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.