imgalt

GOST 481-80

ГОСТ 481-80

Compressed asbestos fibre sheets and gaskets from it. Specifications

Паронит и прокладки из него. Технические условия

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)

The standard applies to sheet paronite and gaskets from it, intended for sealing flat connectors of units with different environments.

Стандарт распространяется на листовой паронит и прокладки из него, предназначенные для уплотнения плоских разъемов агрегатов с различными средами.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 3/27/1980

SKU: RUSS51846

Price: $239.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 91 Building materials and construction »

Standards for pipe fittings (TPA) » 13. Standards for basic components and parts of injection molding machines » 13.6 Gaskets »

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.4 Sealing materials, adhesives, sealants »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.15 Mineral materials and products »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.15 Mineral materials and products »

National Standards for KGS (State Standards Classification) » Latest edition » L Chemical products and rubber-asbestos products » L6 Rubber and asbestos products » L65 Asbestos products »


As a Replacement Of:

GOST 481-71: Paronite

The Document References:

GOST 13502-86: Paper bags for loose products

GOST 14192-96: Cargo marking

GOST 17308-88: Twines. Specifications

GOST 24036-80: Seal sheet materials, asbestos polymer. Method of test for folding resistance

GOST 24037-90: Asbestos-polymer seal sheet materials. Method of test for resistance to liquids

GOST 24038-90: Asbestos-polymer seal sheet materials. Method of test for compressibility and recoverability

GOST 24039-80: Seal sheet materials, asbestos polymer. Method of measurements of sizes and density

GOST 24104-88: General purpose and reference laboratory balances

GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions

GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 3560-73: Sealing tepe

GOST 3826-82: Wire cloth nets with square mesh. Specifications

GOST 4204-77: Reagents. Sulphuric acid. Specifications

GOST 4461-77: Reagents. Nitric acid. Specifications

GOST 4543-71: Structural alloyed steel

GOST 5279-74: Crystal graphite for foundry purposes. Specifications

GOST 5420-74: Cryptocrystalline graphite. Specifications

The Document is Referenced By:

ATK 24.201.10-90: Inspection Windows for Steel Vessels and Apparatus. Types, Design, and Dimensions. Technical Requirements

ATK 24.201.18-91: Flanges, Covers, and Gaskets for Compact Chemical Apparatus. Design and Dimensions. Technical Specifications

ATK 24.202.08-90: Ball valve valve four-flow plates for column type devices. Construction and main dimensions

ATK 24.218.01-90: Bosses, Plugs, and Gaskets. Design, Dimensions, and General Technical Specifications

ATK 24.218.04-90: Liquid mesh filters for pipelines. Design, dimensions and dimensions

ATK 26-01-1-89: Pipeline viewing lights. Types and designs

ATK 26-02-1-89: Direct-flow valve plates for column-type devices. Options. Construction and main dimensions

ATK 26-02-2-89: Four-flow straight valve plates for column-type apparatus. Options. Construction and main dimensions

ATK 26-02-4-89: Trapezoid valve plates for column type apparatus. Parameters, design and main dimensions

ATK 26-18-14-98: Flanges of vessels and apparatus steel flat welded to a conditional pressure up to Ru 0.1 MPa. Design, dimensions and general technical requirements

GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements

GOST 14279-79: Sleeved water collecting. Technical conditions

GOST 15180-86: Flexible flat gaskets. Main parameters and dimensions

GOST 15518-83: Plated heat exchangers. Type, basic parameters and dimensions. Technical requirements

GOST 16549-2019: Cast iron plug-through cranes, coupling cast iron, for nominal pressure PN? 1.0 MPa (10 kgf / cm2) with a plug for draining water

GOST 16756-71: Butyl methacrylate. Specifications

GOST 17147-80: Fuel TG-02. Specifications

GOST 17366-80: Welded thick-walled steel barrels for chemical products

GOST 17477-86: Tetrahydrofurfuril alcohol. Specifications

GOST 19503-88: Hydrazine hydrate technical. Technical conditions

GOST 19681-83: Water mixing and distribution accessories for sanitary and laboratory applications. General technical requirements

GOST 21039-75: Acetic anhydride for industrial use. Specifications

GOST 22054-76: Motor and aviation gasoline. Method for the evaluation of chemical stability

GOST 22229-83: Ceramic through insulators for voltage over 1000 V. General specifications

GOST 23357-78: Threaded pipeline connections. Joint washers for radial mounting. Construction

GOST 23358-78: Fittings made on the thread. Sealing packings. Dimensions. Technical requirements

GOST 23358-87: Threaded pipe-line connections. Joint washers. Design

GOST 25164-82: Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements

GOST 26969-86: Standard orifice plates for flow meters. Specifications

GOST 27590-2005: House-tube water-watered heat supply systems. General specifications

GOST 28759.6-90: Gaskets from nonmetallic materials.

GOST 30684-2000: Asbestos and non-asbestos gasket materials. Method of testing of tensile strength

GOST 30765-2001: Metal transport packagings. General specifications

GOST 30872-2002: Air cooling machines. General specifications

GOST 32216-2013: Special railway rolling stock. General technical requirements

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 34233.4-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of the strength and tightness of flange connections

GOST 34861-2022: Non-asbestos sealing sheets and gaskets made of them. Technical conditions

GOST 3849-78: Accessories for vertical cylindrical strorace tank for pertoleum products. Cast iron joints for swing tube

GOST 9029-72: Fire turntable combined monitor

GOST 9923-80: Manual fire barrel. Specifications

GOST 9984-85: Ceramic support insulators rated for voltage over 1000 v

GOST R 50401-92: Suction gauzes. Specifications

GOST R 51364-99: Air cooling apparatus. General specifications

GOST R 52034-2003: Ceramic support insulators for voltage over 1000 V. General specifications

GOST R 52034-2008: Ceramic support insulators for voltage over 1000 V. General specifications

GOST R 52857.4-2007: Vessels and apparatus. Norms and methods of strength calculation. Stength and leak-tightness calculation of flange joints

GOST R 53978-2010: Special railway rolling stock. General technical requirements

GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General

GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General

GOST R 55982-2014: Acid acetic for the food industry. Specifications

GOST R 56968-2016: Table vinegar. Specifications

GOST R 57250-2016: Tetrahydrofurfuril alcohol. Specifications

GOST R 57624-2017: Aromatized table vinegar. Specifications

GOST R 58067-2018: Maintenance of ships under construction, refit and repair. Heating systems of ship’s compartments. Requirements

GOST R 58618-2019: The main pipeline transport of oil and oil products. Tank equipment. Breathing and safety valves. General specifications

GOST R 58620-2019: The main pipeline transport of oil and oil products. Tank equipment. Acceptance devices for tanks. General specifications

GOST R 70203-2022: Aluminum roofs for tanks. Specifications

GOST R 70638-2023: Pipeline valves. Degreasing methods

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)

Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083

Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP

Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems

Manual for SNiP 2.04.02-84: Cooling Tower Design Guide

Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment

Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants

Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems

Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks

Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities

Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction

Manual for VNTP 1-86: Guidelines for the design of pipelines laid in underground workings

MI 2638-2001: State system for ensuring uniformity of measurements. Chamber and tubeless diaphragms installed in flanged connections of measuring pipelines. Dimensional control methods for the primary and periodic calibration of measuring systems with restricting devices

NTP 10-12976-2000*: Norms of technological design of enterprises of the alcohol industry

OST 108.101.104-76: Water-steam heaters. Forward water chambers (with elliptic bottom, two-way). Design and dimensions.

OST 108.101.105-76: Water-steam heaters. Forward water chambers (with elliptic bottom, four -way). Design and dimensions.

OST 108.734.101-76: Water-steam heaters. Gaskets. Design and dimensions.

OST 108.734.102-76: Water-steam heaters. Gaskets. Design and dimensions.

OST 108.734.103-76: Water-steam heaters. Gaskets. Design and dimensions.

OST 153-39.3-051-2003: Gas-distribution system technical maintenance. Main regulations. Gas-distribution network and gas equipment. Tank and balloon plants

OST 24.125.24-89: Flanges of welded butt joint with ledge for NPP pipelines.Design and dimensions.

OST 24.125.25-89: Flanges of welded butt joint with depression for NPP pipelines. Design and dimensions.

OST 24.125.26-89: Flanges connecting ledge welded butt joint for NPP pipelines. Design and dimensions.

OST 26.260.454-99: Spiral wound gasket. Types and dimensions. General specifications.

OST 26.260.460-99: Lobes, locks and pads. Design, dimensions and general technical requirements.

OST 26.260.472-2000: devices for installation of pressure gauges and pressure selection. General technical requirements.

OST 26-01-1242-75: Shaft seals for apparatuses with mixing devices. Hydraulic locks. Parameters, Design and main Dimensions. Technical requirements .

OST 26-01-1247-75: Shaft seals for apparatuses with mixing devices. Stuffing box Seals. Parameters, Design and main Dimensions. Technical requirements.

OST 26-01-1298-81: Flange of vessels and apparatuses made of titanium. Types, Design and dimensions. Strength and integrity calculation procedure.

OST 26-01-342-71: Parts of pipelines. Viewing portholes with flat glass. Design and dimensions

OST 26-02-1401-76: straight-flow valve plates for column devices. Parameters, design and basic dimensions.

OST 26-02-537-79: Devices of air cooling zigzag with two fans. Key parameters and dimensions.

OST 26-02-910-80: Condensate expanders. Specifications

OST 26-04-1038-74: Assembling units and fastening details of pipes with a diameter from 6 to 10 mm. Design and dimensions.

OST 26-04-1222-75: Products of cryogenic engineering. General technical requirements and standards.

OST 26-07-2027-80: Symbols of materials in the design documentation.

OST 26-18-3-86: liquid mesh filter for piping. Design, parameters and dimensions.

OST 26-2011-83: Welded vessels and apparatus hatches. Technical requirements.

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OST 34-10-504-95: Details and components of TPS pipelines. Flanged connections for disk orifice plates of TPS pipelines for Pnom 2.5 MPa (25 kg/cm2). Construction and dimensions.

OST 34-10-569-93: Axial single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-10-570-93: Axial two-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-10-571-93: Axial three-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-10-572-93: Axial four-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-10-755-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf

OST 34-10-756-97: Parts and assembly units of pipelines of TPPs at Rrab <2.2 MPa (22 kgf

OST 34-13-016-88: Self-tapping bolts. Design and dimensions. Technical requirements

OST 34-13-875-86: Paronite and gaskets from it. Technical conditions (restriction GOST 481-80)

OST 34-42-569-82: Axial single-lens compensator for Pnom ≤1.6 MPa (16 kg/cm2). Design and dimensions.

OST 34-42-668-84: Details and prefabricated units of NPP pipelines, working P<2.2 MPa (22 kg/cm2), t <= 350 °C. Flat welded flanges with a nipple. Construction and dimensions.

OST 37.002.1153-86: Typical technological process sealing isolation and braiding at the ends of electrical wires. Main provisions.

PB 03-108-96: Process pipeline design and safe operation rules

PI 1.2.315-89: Production of glazing parts from organic glasses

PKO-2010.6: Reference materials for the design work of the electrical part of the project

RD 153-34.1-24.505-98: Recommended Practice for Selection of Injectors for Supplying Water Spray in Fuel Pulverizing Systems in Order to Quickly Reduce the Temperature of the Dust-Gas-Air Mixture in Emergencies

RD 153-34.1-43.106-2001: Model Guidelines for Acceptance, Storage, and Use of Fireresistant Turbine Oils Type OMTI

RD 204 USSR 157-84: Recommendations for the design and operation of silicate water treatment plants for corrosion protection of the internal surfaces of hot water pipelines

RD 24.207.07-90: Pipe fittings. Gaskets sealing. Dimensions and materials

RD 26-15-88: Vessels and apparatus. Norms and methods of strength and tightness calculation for flanged joints.

RD 302-07-22-93: Pipe fittings. Packing glands. Construction and main dimensions. Technical requirements

RD 31.48.01.01-81: Spare parts for gantry cranes of foreign construction. Assembly units and parts. Technical requirements

RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.

RD 34.20.514-92: Model Guidelines for Operation Gas Supply Systems of Thermal Power Stations

RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above

RD 34.47.613-74: Guidelines for the overhaul of the oil circuit breaker VMP-10P

RD 34.50.501-96: Model Guidelines for Operation of Electrolytic Units for Obtaining Hydrogen and Oxygen

RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)

RD 39-0147014-348-89: Guidelines for Corrosion Protection of Field Equipment Using Domestically Manufactured Inhibitors

RD 5.30.031-84: High pressure carbon dioxide fire extinguishing system. Design rules and regulations

RD EO 0198-2000: Maintenance and repair of NP systems and equipment. Assembly of flange connections. General technical requirements

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RMD 51-25-2018 St. Petersburg: Recommendations for the design, installation and operation of facade systems for new construction, reconstruction and repair of residential and public buildings in St. Petersburg. Part II Recommendations for the operation and repair of facade systems for new construction and reconstruction of residential and public buildings in St. Petersburg

RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

SN 10-12446-99: Collection of standards for distilleries and distilleries

SO 08-04-AKTNP-009-2004: Table of technical equipment of emergency recovery points of main oil product pipelines of JSC AK Transnefteprodukt

SO 34.20.514-2005: Guidelines for the operation of the gas economy of thermal power plants

SO 34.23.501-2005: Guidelines for the operation of fuel oil facilities of thermal power plants

SO 34.23.605-2005: Guidelines for the installation and removal of plugs on existing gas pipelines of gas supply systems of thermal power plants and boilers

SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes

ST TsKBA 046-2007: Pipe fittings. Degreasing methods

ST TsKBA 058-2008: Pipe fittings. Gaskets of paronite and rubber. Sizes and technical requirements

ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation

ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual

TU 26-02-1089-88: Type 1-AVG horizontal air coolers Technical conditions

TU 26-02-1098-89: Heat exchangers, shell and tube made of titanium. Technical conditions

TU 26-02-1102-89: Shell and tube heat exchangers of increased thermal efficiency with an expander on the housing

TU 26-02-1105-89: Shell and tube heat exchangers with fixed tube sheets and shell and tube with a temperature compensator on the shell with a shell diameter of 159, 273, 325, 426 mm increased thermal efficiency. Technical conditions

TU 26-02-1162-95: Shell and tube heat exchangers for elevated temperatures and pressures with a floating head and a compensator on it. Technical conditions

TU 3113-028-00220302-01: Heaters of steam and water-to-water for heating networks of heating and hot water systems. Technical conditions

TU 34-38-20092-94: High pressure surface heaters for steam turbine regeneration systems. Technical conditions for major repairs

TU 34-38-20111-96: Centrifugal pump TsN-400-105-U4 (3B-200x2). Technical conditions for repair

TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs

TU 34-38-20195-94: Fuel oil heaters of PM and PMR types. Technical conditions for major repairs

TU 34-38-20196-94: Steam heaters, water-water heat exchangers. Technical conditions for major repairs

TU 34-38-20365-94: Power valves. General technical conditions for major repairs

TU 3612-005-00220302-98: Shell-and-tube heat exchangers for special purposes. Thermosiphon evaporators. Technical conditions

TU 3612-007-00220302-99: Shell-and-tube heat exchangers for special purposes. Vacuum capacitors. Technical conditions

TU 3612-013-00220302-99: Shell-and-tube heat exchangers for special purposes. Evaporators with steam space and tube bundles to them

TU 3612-014-00220302-99: Heat exchangers "pipe in pipe". Technical conditions

TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them

TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell

TU 3615-044-00220302-02: Cylindrical horizontal reservoirs for liquid hydrocarbonic propane and butane gases

TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers

TU 67-18-163-93: Three-layer wall frameless panels with steel cladding and mineral wool insulation. Technical conditions

VNTP 34-93: Engineering Design Standards for Alcohol Industry Facilities

VNTP 36-84: Norms of technological design of coal and shale mines. Section "Pipelines laid in underground workings"

VSN 10-83/Minhimprom: Instruction on designing of oxygen gas pipelines

VSN 279-85: Guidelines for Sealing Joints in Ventilating and Plumbing Systems

VSN 2-93-81: Instructions for heat treatment of precast concrete and reinforced concrete products by natural gas combustion products

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!