GOST 12.4.107-82
ГОСТ 12.4.107-82
|
|
Occupational safety standards system. Building. Safety ropes. General safety requirements
Система стандартов безопасности труда. Строительство. Канаты страховочные. Общие технические требования
Status: Not effective - Superseded. Information about registration 943-st dated November 20, 2012 (official website of Rosstandart); IUS 2-2013
The standard applies to steel safety ropes arranged horizontally or at an angle of up to 7 ° to the horizon, used in the construction and installation works to protect workers when they fall from a height, and establishes general technical requirements for them, as well as the conditions for their use.
Стандарт распространяется на стальные страховочные канаты, расположенные горизонтально или под углом до 7 ° к горизонту, применяемые при производстве строительно-монтажных работ для защиты работающих при падении с высоты, и устанавливает общие технические требования к ним, а также условия их применения.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
12/25/1981
SKU: RUSS52104
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
1. Organizational and methodological regulatory documents »
k.12 Production »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
8 Personal protective equipment »
8.6 Protection Equipment against falling from height »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.340 Protective equipment »
13.340.99 Other protective equipment »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.340 Protective equipment »
13.340.99 Other protective equipment »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh0 General rules and regulations for construction and building materials »
Zh07 Safety engineering »
The Document is Replaced With:
GOST 12.4.107-2012: Occupational safety standards system. Building. Safety ropes. Specifications
The Document References:
GOST 12.4.026-76: Signal colors and safety signs
GOST 13882-68: Desktop scales with weight and dial
GOST 2688-80: Two lay rope type ЛК-Р construction 6x19 (1+6+6/6)+1 o.c. Dimensions
GOST 29329-92: Balance for static weightings
GOST 3069-80: Two lay rope type ЛК-О construction 6x7 (1+6)+1 o.с. Dimensions
GOST 3077-80: Two lay rope type ЛК-О construction 6x19 (1+9+9)+1 o.с. Dimensions
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 7502-69: Measuring metal tapes
GOST 7502-98: Measuring metal tapes. Specifications
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
The Document is Referenced By:
GOST R 55260.1.1-2013: Hydro power plants. Part 1-1. Hydraulic structures of hydropower stations. General safety requirements
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 2.03.11-85: A manual for monitoring the state of building metal structures of buildings and structures in aggressive environments, conducting surveys and designing the restoration of corrosion protection of structures
Manual for SNiP 2.03.11-85: Designer's Guide to Corrosion Protection for Concrete and Reinforced Concrete Structures
Manual for SNiP 2.03.11-85: Manual on the design of corrosion protection for stone, reinforced stone and asbestos-cement structures
MDS 11-17.2004: Rules for the inspection of buildings, structures and complexes for liturgical and auxiliary purposes
MDS 12-16.2003: Recommended Practice for the Development of Local Regulations (Proprietary Standards) for Use in an Occupational Safety and Health Management Systems in a Construction Organization
MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements
MDS 12-39.2008: Recommendations for the preparation of a project for the installation of a panel high-rise building
MDS 12-47.2008: Roofing of metal tiles. Design of works
MDS 12-59.2011: Production design for dismantling of panel buildings
MDS 12-60.2011: Production design for installation of steel structures of buildings
ODM 218.4.002-2008: Guidelines for monitoring the status of existing bridge structures
Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures
OST 36-100.3.06-85: Occupational safety standards system. Special works on the erection of high-level reinforced concrete structures. Safety requirements.
PB 06-227-98: Safety regulations for auxiliary workshops of mining enterprises
POT R M-012-2000: Industry-Wide Occupational Safety and Health Requirements for Work at Heights
POT R M-025-2002: Intersectoral rules on labor protection during the operation of water supply and sewer facilities
POT R O-00-97: Occupational Safety and Health Requirements in the Pulp and Paper and Rosin Industry
RD 34.03.204: Safety rules when working with tools and accessories
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Rules 00-97: Rules for Occupational Safety and Health in the Pulp and Paper and Forestry Industries (final)
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
SO 153-34.03.603-2003: Guidelines for Use and Testing of Protective Means Used in Electrical Installations
SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities
VSN 203-84: Safety Requirements for the Construction of Hi-Rise Reinforced Concrete Structures
VSN 604-III-87: Occupational Safety in Construction of Cable Line Facilities
|
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
