GOST 13762-86
ГОСТ 13762-86
|
|
Measuring means for linear and angular measurements. Marking, packing, transporting and storage
Средства измерений и контроля линейных и угловых размеров. Маркировка, упаковка, транспортирование и хранение
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Decree of the State Standard No. 743 of 05.27.91
The standard applies to measuring and controlling instruments of linear and angular dimensions (hereinafter referred to as measuring instruments) and establishes their marking, packaging, transportation and storage.
Стандарт распространяется на средства измерений и контроля линейных и угловых размеров (далее - средства измерений) и устанавливает ихмаркировку, упаковку, транспортирование и хранение.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
3/23/1986
SKU: RUSS52169
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P5 Instruments, tools and devices for linear, angular, profile and spatial measurements »
P59 Methods and means of testing »
National Standards for OKSTU »
TOOL, TECHNOLOGICAL TOOLING, ABRASIVE MATERIALS »
Measuring tool »
As a Replacement Of:
GOST 13762-80: Instruments for linear and angular measurements. Marking, packing, transportation and storage
The Document References:
GOST 1.9-67: State System of Standardization. State Quality Mark. Form, dimensions and application rules
GOST 10354-82: Polyethylene film Specifications
GOST 14192-77: Marking of cargoes
GOST 14225-83: Wooden cases
GOST 2695-83: Sawn timber of leaf-bearing species
GOST 3916-69: Plywood. Specification
GOST 4598-74: Fibre board. Technical requirements
GOST 7016-82: Products of wood and wooden materials. Parameters of surface roughness
GOST 7933-75: Boxing cardboard. Specification
GOST 8486-66: Lumber from softwood
GOST 8828-75: Two-layer packaging paper. General specifications
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9569-79: Paraffin paper
GOST 9998-74: Polyvinyl chloride plasticized film for haberdashery articles
The Document is Referenced By:
GOST 10-88: Inside micrometers. Specifications
GOST 11007-66: Measuring tips of apparatus for linear measurements. Specifications
GOST 11098-75: Gauge callipers with reading arrangement. Specifications
GOST 11196-74: Levels with micrometrical feed of ampule. Specifications
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 14864-78: Pneumatic plug gauges from 3 to 160 mm. Specifications
GOST 14865-78: Setting rings for internal measuring instruments. Specifications
GOST 162-90: Depth gauges. Specifications
GOST 164-90: Vernier height gauges. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 17353-89: Devices for measuring the shape and arrangement deviations of the surface of revolution
GOST 18833-73: Lever-gearing measuring heads. Specifications
GOST 21625-76: Digital information-measuring mechanism with stream-jet-convertor for measuring linear sizes
GOST 22601-77: Control bars. Specifications
GOST 2475-88: Wires and rolls
GOST 2875-88: Prismatic measurers of plane angle
GOST 28798-90: Spring measuring heads. General specifications
GOST 3749-77: Checking 90° squares. Specifications
GOST 3899-81: Transducers with electric contacts for control of linear dimensions. Specifications
GOST 4046-80: Sine bars. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4380-93: Micrometers with inserts. Specifications
GOST 4381-87: Lever-type micrometers. General specifications
GOST 5378-88: Vernier protractors. Specifications
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 6507-90: Micrometers. Specifications
GOST 6512-74: Metering spur gears. Specifications
GOST 7470-92: Micrometric depth meters. Specifications
GOST 7661-67: Dial depth gauges. Specifications
GOST 8.490-83: State system for ensuring the uniformity of measurements. Instruments for measurements of gear interaxial distance. Methods of verification
GOST 8026-92: Levelling rules. Specifications
GOST 868-82: Internal dial gauges graduated in 0,01 mm. Specifications
GOST 9038-90: Gauge blocks. Specifications
GOST 9244-75: Inside callipers graduated in 0,001 and 0,002 mm. Specifications
GOST 9378-93: Roughness comparison specimens
GOST 9392-89: Levelling squares and bars. Specifications
GOST 9416-83: Building levels. Technical requirements
GOST 9696-82: Multi-revolution dial indicators graduated in 0,001 and 0,002 mm. Types. Basic parameters. Specifications
GOST R 51121-97: Non-food products. Information for consumer. General requirements
GOST R 58514-2019: Building levels. Technical conditions
GOST R 8.670-2009: State system for ensuring the uniformity of measurements. Precision inductive transducers for linear dimensions (parameters). Methods of verifications
GOST R 8.671-2009: State system for ensuring the uniformity of measurements. In process gauges of linear parameters. Verification methods
MI 1919-88: Lever shackles. Method of verification
MI 1946-88: Methodical instructions. GSI Normalyzers. Models БВ-5045, БВ-5046, 22202. Verification procedure
MI 1988-89: Guidelines. State system for ensuring uniformity of measurements. Zubomer. Model 23900. Method of verification
MI 2051-90: Guidelines. GSE. Lever micrometers. Method of verification
MI 524-2010: State system for ensuring uniformity of measurements. Shtangenzubomery with vernier SHZN-18, SHZN-40. Method of verification
TU 13-427-78: An inclinometer. Technical conditions
TU 13-428-78: Altimeter. Technical conditions
TU 13-429-78: Goniometer. Technical conditions
TU 2-034-439-88: Prisms testing and marking with one prismatic recess and overlay type P1
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.