GOST R 1.11-99

ГОСТ Р 1.11-99

State system for standardization of Russian Federation. Metrological expert evaluation of state standards projects

Государственная система стандартизации Российской Федерации. Метрологическая экспертиза проектов государственных стандартов

Status: Not effective - Canceled. IUS 7-2011

This standard establishes the organization, procedure and tasks of metrological examination of draft state standards of the Russian Federation, as well as projects of interstate standards developed by the TK and MTC, the secretariats of which are entrusted to the Russian Federation

Настоящий стандарт устанавливает организацию, порядок проведения и задачи метрологической экспертизы проектов государственных стандартов Российской Федерации, а также проектов межгосударственных стандартов, разрабатываемых ТК и МТК, ведение секретариатов которых возложено на Российскую Федерацию

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 8

Approved: Gosstandart of Russia, 6/21/1999

SKU: RUSS52471

Price: $113.49




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 01 General. Terminology. Standardization. Documentation »

Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »

PromExpert » SECTION II. METROLOGICAL » I Organizational and technical bases of metrological support » 1 Organization and management of metrological support » 1.3 Accreditation infield of ensuring uniformity of measurements »

PromExpert » SECTION II. METROLOGICAL » I Organizational and technical bases of metrological support » 1 Organization and management of metrological support » 1.1 Basic provisions of metrological support »

ISO classifier » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.120 Standardization. General rules »

National standards » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.120 Standardization. General rules »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T53 System of technological documentation »


The Document References:

GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm

GOST 8.417-2002: State system for ensuring the uniformity of measurements. Units of quantities

GOST R 1.12-2004: Standardization in the Russian Federation. Terms and definitions

GOST R 1.8-2002: State system for standardization of Russian Federation. Interstate standards. Rules of developing, application, renovation and cease application concerning Russian Federation

GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R ISO 5725-1-2002: Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions

GOST R ISO 5725-2-2002: Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method

GOST R ISO 5725-3-2002: Accuracy (trueness and precision) of measurement methods and results. Part 3. Intermediate measures of the precision of a standard measurement method

GOST R ISO 5725-4-2002: Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method

GOST R ISO 5725-5-2002: Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method

GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values

MI 2233-2000: Measurements efficiency provided upon technological processes control. General provisions.

R 50.2.008-2001: National System for Standardization of Measurements. Techniques for Chemical Quantitative Analysis. Scope and Procedure for Execution of Metrological Expert Review

RD 50-98-86: Methodological instructions. Selecting universal means of dimensional measurement up to 500 mm (application as per GOST 8.051-81).

RMG 29-99: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions

The Document is Referenced By:

GOST R 1.4-2004: Standardization in Russian Federation. Standards of organizations. General

GOST R 1.8-2002: State system for standardization of Russian Federation. Interstate standards. Rules of developing, application, renovation and cease application concerning Russian Federation

GOST R 1.8-2004: Standardization in the Russian Federation. Interstate standards. Rules of developing, application, renovation and cease application in the Russian Federation

GOST R 51672-2000: Metrological ensuring of product testing for the assurance of conformity. General principles

GOST R 53009-2008: Environmental control and monitoring systems. General guidelines on creation, adoption and ensuring functioning of the chemical weapons destruction

GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R 8.589-2001: State system for ensuring the uniformity of measurements. Control of nature environment soiling. Metrological ensuring. General principles

GOST R 8.595-2002: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements to procedures of measurements

GOST R 8.595-2004: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements for procedures of measurements

MI 2240-98: National Measurement Standards. Analysis of Measurement, Inspection, and Testing Practicies at Businesses, Organizations, and Associations. Work Execution Technique and Procedures

MI 2267-2000: State system for ensuring the uniformity of measurements. Ensuring the effect of measurements by the control of technological processes. Metrological examination of technical documents

R 50.1.004-2002: Preparation of Intergovernmental Standards for Adoption and Enactment in the Russian Federation and Preparation for Cancellation of Them

R 50.1.039-2002: Development, Updating, and Withdrawal of Standards and Guidelines on Standardization, Metrology, Certification, Accreditation, and Cataloging

R 50.2.008-2001: National System for Standardization of Measurements. Techniques for Chemical Quantitative Analysis. Scope and Procedure for Execution of Metrological Expert Review

R 52.14.648-2003: Recommendations. Metrological examination of regulatory and technical documentation

RD 52.14.642-2003: Text documents. General requirements for composition, presentation, design, content and designation

RMG 63-2003: State system for ensuring the uniformity of measurements. Providing measurement efficiency in control of technological processes. Metrological expertise of the technical documentation

RT 02-2008: Organization of verification of measuring instruments and the procedure for developing documents on verification methods

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Hoisting cranes. Rules and test methods
Language: English
Price: $393.39
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Cable products for nuclear power plants. Technical requirements of the operating organization
Language: English
Price: $449.11
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Loads and actions
Language: English
Price: $495.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!