GOST R 54257-2010
ГОСТ Р 54257-2010
|
|
Reliability of the constructions and foundations. Basic principles and requirements
Надежность строительных конструкций и оснований. Основные положения и требования
Status: Not effective - Canceled. According to the Decree of the Government of the Russian Federation of September 29, 2015 No. 1033 "On Amendments to the Decree of the Government of the Russian Federation of December 26, 2014 No. 1521"
This standard establishes the general principles for ensuring the reliability of structures and foundations of buildings and structures and should be applied when developing technical regulations, other regulatory documents and standards governing the design, construction and operation of construction objects
Настоящий стандарт устанавливает общие принципы обеспечения надежности конструкций и оснований зданий и сооружений и его следует применять при разработке технических регламентов, других нормативных документов и стандартов, регламентирующих проектирование, возведение и эксплуатацию строительных объектов
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/23/2010
SKU: RUSS52762
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
k.20 Basic provisions for reliability of building structures »
PromExpert »
SECTION I. TECHNICAL REGULATION »
III Quality »
2 Product quality assurance »
2.2 Quality requirements for individual product properties »
2.2.2 Ensuring wear resistance, reliability, durability of products and ergonomic indicators »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.01 Construction in general »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.01 Construction in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh0 General rules and regulations for construction and building materials »
Zh02 Design and calculation norms »
The Document References:
Code 190-FZ: Town Planning Code of the Russian Federation
Federal Law 184-FZ: About technical regulation
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
The Document is Referenced By:
GOST 23118-2012: Building steel structures. General specifications
GOST 33329-2015: Acoustical barriers for railway transport. Technical requirements
GOST R 54418.2-2014: Renewable power engineering. Wind power engineering. Wind turbines. Part 2. Design requirements for small wind turbines
GOST R 54928-2012: Pedestrian bridges for polymer composites. Specifications
GOST R 54931-2012: Acoustical barriers for railway transport. Technical requirements
GOST R 55198-2012: Civil defence. Constructive calculations of bearing elements defensive constructions of civil defence. General requirements
GOST R 55658-2013: Panels wall with the wooden framework. Specifications
GOST R 55943-2014: Facade’s thermo insulation composite systems with external mortar’s lays. Method for the determination and classifying of the resistance to the exposure to adverse weather conditions
GOST R 55989-2014: Trunk gas pipelines. Design standard for pressure over 10 MPa. Principal requirements
GOST R 55990-2014: Oil and gas-oil fields. Field pipelines. Design codes
GOST R 56193-2014: The services of housing and communal services and management of apartment buildings. Services capital repair of common property in apartment buildings. General requirements
GOST R 56194-2014: The services of housing and communal services and management of apartment buildings. Services conduct technical reviews of apartment houses and determine on the basis of the work plan, list of works. General requirements
GOST R 57109-2016: Inland water transport. Control of technical condition and safety assessment of hydraulic structures of inland water transport. Safety requirements
GOST R 57818-2017: Design standards of buildings and constructions for gas processing industry
GOST R ISO 13824-2013: Practical aspect of management of risk. General principles risk assessment of systems involving structures
ODM 218.2.027-2012: Guidelines for the calculation and design of reinforced ground retaining walls on highways
ODM 218.2.040-2014: Guidelines for the evaluation of the aerodynamic characteristics of the cross sections of bridges
ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
ODM 218.2.054-2015: Recommendations for the use of textile-sand piles in the construction of roads on weak grounds
ODM 218.2.058-2019: Recommendations on the use of composite materials in the construction of bridge structures and pedestrian bridges
ODM 218.2.068-2016: Recommendations on accounting for dynamic effects from modern vehicles when calculating the strength, stability and deformability of the road bed
ODM 218.2.069-2016: Recommendations for the design of approaches of the roadbed on a weak base to artificial structures
ODM 218.3.014-2011: Evaluation method for technical condition of bridges and automobile roads.
ODM 218.3.042-2014: Recommendations for determining the parameters and assignment of categories of defects in assessing the technical condition of bridges on highways
ODM 218.3.062-2019: The use of robotic telediagnostic systems for the inspection of culverts and drainage structures on roads
ODM 218.4.022-2015: Recommendations for conducting geotechnical monitoring of road tunnels under construction and operation
RD EO 1.1.2.99.0867-2012: Methods for assessing the technical condition and residual life of building structures of nuclear power plants
RMD 32-24-2015 Sankt-Peterburg: Design of artificial structures at transport facilities in St. Petersburg
SP 105.13330.2012: Buildings and premises for keeping and treating agricultural production
SP 106.13330.2012: Livestock, poultry and animal-breeding buildings and facilities
SP 107.13330.2012: Greenhouses and hotbeds
SP 108.13330.2012: Plants, buildings and constructions of storage and grain processing
SP 109.13330.2012: Cold storage units
SP 116.13330.2012: Engineering protection of territories, buildings and structures from dangerous geological processes. Basic principles.
SP 120.13330.2012: Subway systems
SP 121.13330.2012: Aerodromes
SP 122.13330.2012: Railway and highway tunnels
SP 123.13330.2012: Underground storages of natural gas, oil and processing product
SP 128.13330.2012: Aluminium structures
SP 147.13330.2012: Buildings for establishments of social service. Rules for reconstruction
SP 16.13330.2011: Steel structures
SP 164.1325800.2014: Strengthening of reinforced concrete structures by FRP composites. Rules for design
SP 20.13330.2011: Loads and impacts
SP 21.13330.2012: Buildings and structures on undermined territories and slumping soils
SP 225.1326000.2014: Station buildings, structures and devices
SP 25.13330.2012: Soil bases and foundations on permafrost soils
SP 26.13330.2012: Foundations for machines with dynamic loads
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 90.13330.2012: Thermal power stations
SP 91.13330.2012: Underground mine workings
SP 92.13330.2012: Warehouses of dry mineral hestilizers and chamical means of protection plants
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.