GOST 5233-89
ГОСТ 5233-89
|
|
Paint materials. Method for determination of coating hardness pendulum instrument
Материалы лакокрасочные. Метод определения твердости по маятниковому прибору
Status: Effective - Supersedes. IUS 6-1989; The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)
The standard applies to paints and varnishes and establishes a quantitative method for determining the hardness of paint coatings using pendulum devices.
Стандарт распространяется на лакокрасочные материалы и устанавливает количественный метод определения твердости лакокрасочных покрытий с помощью маятниковых приборов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
3/27/1989
SKU: RUSS52796
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.3 Products of paint and varnish industry »
ISO classifier »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National standards »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L1 Inorganic chemical products »
L19 Test methods. Packaging. Marking »
National Standards for OKSTU »
PAINT MATERIALS, SEMI-PRODUCTS, FILM, PHOTO AND MAGNETIC MATERIALS AND HOUSEHOLD CHEMICALS »
Control methods (testing, analysis, measurements) »
National Standards for OKSTU »
PAINT MATERIALS, SEMI-PRODUCTS, FILM, PHOTO AND MAGNETIC MATERIALS AND HOUSEHOLD CHEMICALS »
Paints and varnishes »
The Document is Replaced With:
GOST 5233-2021: Paint and varnish materials. Method for determination of hardness of coating by pendulum device
As a Replacement Of:
GOST 5233-67: Paints and varnishes. Method for determining the hardness of the coating on a pendulum device
The Document References:
GOST 17299-78: Technical ethyl alcohol. Specifications
GOST 19007-73: Paintwork materials. Method for determination of drying time and degree
GOST 2768-84: Acetone technical. Specifications
GOST 3722-81: Rolling bearings. Balls. Technical requirements
GOST 5072-79: Mechanical stop-watches. Specification
GOST 6507-78: Micrometers with a division value of 0.01 mm. Specification
GOST 6507-90: Micrometers. Specifications
GOST 683-85: Glass for photographic plates specification
GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing
GOST 8981-78: Acetic ether and n-butyl acetate technical. Specifications
The Document is Referenced By:
GOST 10144-89: Enamels XB-124Specifications
GOST 10503-71: Oil paints, ready for use. Specifications
GOST 10982-75: Write enamel ЭП-148 for refrigerators and other electrodomestic devices. Specifications
GOST 1347-77: Varnish БТ-783. Specifications
GOST 14923-78: Enamels ПФ-223. Specifications
GOST 15030-78: Varnish KФ-965. Specifications
GOST 15865-70: Insulating varnish MЛ-92. Specifications
GOST 15907-70: Varnishes ПФ-170 and ПФ-171. Specifications
GOST 15943-80: Electrical insulating enamel ЭП-91. Specifications
GOST 16302-79: Primer ФЛ-086. Specifications
GOST 16508-70: Insulating silicon varnishes. Specifications
GOST 17151-2019: Utensils made of sheet aluminum. General specifications
GOST 17151-81: Cooking utensils made
GOST 18099-78: Enamels ML-152. Specifications
GOST 18335-83: Enamel НЦ-184. Specifications
GOST 18374-79: Enamels XB-110 and XB-113. Specifications
GOST 19024-79: Enamels AC-182. Specifications
GOST 20481-80: Enamels MЛ-1110. Specifications
GOST 20824-81: Varnish ЭП-730. Specifications
GOST 21096-75: Window steel panels of hot-rolled and roll-formed sections for industrial buildings
GOST 21227-93: Enamels ПФ-218. Specifications
GOST 21807-76: Concrete mixture conveying buckets to 2 cub m volume. General specifications
GOST 21824-76: Enamels Xc-119 And Xc-119e Specifications
GOST 22369-77: Enamels ЭП-567. Specifications
GOST 22438-85: Enamels ЭП-525. Specifications
GOST 22564-77: Enamels KO-84 and KO-859. Specifications
GOST 23122-78: Enamels KO-811 and KO-811K. Specifications
GOST 23143-83: Enamels ЭП-773. Specifications
GOST 23343-78: Primer ГФ-0119. Specifications
GOST 23438-79: Varnishes of type ПЭ-232, ПЭ-250, ПЭ-250М, ПЭ-250ПМ. Specifications
GOST 23599-79: Enamels type ЭП-255 and ЭП-275. Specifications
GOST 23626-79: Emali HV-714. Tehnicheskie usloviya
GOST 23760-79: Enamels MЧ-145. Specifications
GOST 23832-79: Varnishes AK-113 and AK-113Ф. Specifications
GOST 24595-81: Primer B-MЛ-0143. Specifications
GOST 24709-81: Enamels ЭП-140. Specifications
GOST 24784-81: Enamels ПФ-188. Specifications
GOST 25129-82: Primer GF-031. Specifications
GOST 25287-82: Suspension for lubricating film formation BНИИ НП-209. Specifications
GOST 25366-82: Enamel ЭП-5116. Specifications
GOST 25515-82: Enamels НЦ-256. Specifications
GOST 25718-83: Primers AK-069 and AK-070. Specifications
GOST 26825-86: Decontaminable protective polymeric coatings. General technical requirements
GOST 28613-90: Paint coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control
GOST 31093-2003: Paints and varnishes for furniture. General specifications
GOST 312-79: Varnish БТ-5100. Specifications
GOST 33290-2015: Paint materials used in building. General specifications
GOST 33354-2015: Paint materials being in contact with food products. General specifications
GOST 482-77: Zink oxide oil paste. Specifications
GOST 4976-83: Furniture lacquers НЦ-218, НЦ-222, НЦ-243 and НЦ-223. Specifications
GOST 5406-84: Enamels НЦ-25. Specifications
GOST 5470-75: Lacquers of ПФ-283 and ГФ-166 types. Specifications
GOST 5631-79: Lacquer BT-577 and paint BT-177. Specifications
GOST 5971-78: Enamels for instruments. Specifications
GOST 6465-76: Enamels PF-115. Specifications
GOST 64-77: Enamels ГФ-230 BЭ. Specifications
GOST 6586-77: Black paste (oil base) MA-015. Specifications
GOST 6631-74: Enamels НЦ-132. Specifications
GOST 6745-79: Enamel ГФ-1426. Specifications
GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications
GOST 7409-2018: Freight cars. Requirements to paint coatings and corrosion protection and methods of their control
GOST 7462-73: Enamels НЦ-5123. Specifications
GOST 8292-85: Oil and paste color paints
GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing
GOST 9.405-83: Unified system of corrosion and ageing protection. Paint coatings. Method for determination of hot drying conditions
GOST 9.410-88: Unified system of corrosion and ageing protection. Powder polymeric coatings. Typical technological processes
GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications
GOST 9151-75: Enamels of types ГФ-92. Specifications
GOST 9198-83: Enamels of types НЦ-11 and НЦ-11А. Specifications
GOST 926-82: Enamels ПФ-133. Specifications
GOST 9355-81: Primer HS-010. Enamel HS-710. Lacquer HS-76. Specification
GOST 9640-85: Enamels ЭП-51. Specifications
GOST 9754-76: Enamels MЛ-12 type. Specifications
GOST R 12.3.047-98: Occupational safety standards system. Fire safety of technological processes. General requirements. Methods of control
GOST R 51037-97: Protective polymer coatings for insulation, localization, localization dust suppression and deactivation. General technical requirements
GOST R 51102-97: Decontaminable protective polymeric coatings. General technical requirements
GOST R 51691-2000: Paint materials. Enamels. General specifications
GOST R 51691-2008: Paint materials. Enamels. General specifications
GOST R 52020-2003: Water dispersible paint materials. General specifications
GOST R 52165-2003: Paint materials. Varnishes. General specifications
GOST R 52491-2005: Coating materials, used in building. General specifications
GOST R 53202-2008: Paint materials being in contact with food products. General specifications
GOST R 56674-2018: Casting cookware of aluminum alloys with non-stick coating. General specifications
Letter 15153/05-DG: About the application of the standards
MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements
Protocol 03-14-PR: Meeting of the Working Group on making decisions on the possibility of using national and interstate standards developed on the basis of (instead of) previously valid, to ensure the activities of the Federal Accreditation Service (Rosakkreditatsiya) on accreditation and competence verification of accredited persons of April 29, 2022 N 03-14-pr
RD 153-34.1-21.324-98: Method for Inspection of Wall Enclosures of Buildings and Structures at Thermal Power Stations
RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots
RD 24.202.03-90: Weatherproof lacquer coating for oil and gas processing equipment. Technical requirements.
STB 1520-2008: Materials for the horizontal marking of roads. Technical conditions
TR 85-98: Technical recommendations on input quality control of materials used for facade finishing
TU 2311-042-21743165-2005: Varnish "Yarly" V-PL-1120. Technical conditions
TU 2312-075-21743165-2005: Enamel "YARLI" V-MA-1232. Technical conditions
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.