GOST 11358-89
ГОСТ 11358-89
|
|
Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
Толщиномеры и стенкомеры индикаторные с ценой деления 0,01 и 0,1 мм. Технические условия
Status: Effective. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)
The standard applies to indicator thickness gauges and wall gauges with an upper limit of measurement of up to 50 mm, equipped with a reading device with a scale value of 0.01 and 0.1 mm and establishes mandatory requirements for them.
Стандарт распространяется на индикаторные толщиномеры и стенкомеры с верхним пределом измерения до 50 мм, оснащенные отсчетным устройством с ценой деления 0,01 и 0,1 мм и устанавливает обязательные требования к ним.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
1/24/1989
SKU: RUSS52804
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P5 Instruments, tools and devices for linear, angular, profile and spatial measurements »
P53 Instruments for measuring lengths (outer and inner dimensions) »
As a Replacement Of:
GOST 11358-74: Thickness gauge indicator with a division price of 0.01 and 0.1 mm. Basic parameters and dimensions Technical requirements
GOST 11951-82: Wall-mounted display windows with a division price of 0.01 and 0.1 mm. Specification
The Document References:
GOST 13762-86: Measuring means for linear and angular measurements. Marking, packing, transporting and storage
GOST 2.601-95: Operational documents
GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means
GOST 8.383-80: State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9038-90: Gauge blocks. Specifications
MI 1724-87: Guidelines. State system for ensuring uniformity of measurements. Thickness gauge indicator with the price division of 0.01 and 0.1 mm. Method of verification
MI 1814-87: Guidelines. State system for ensuring uniformity of measurements. Stenkomery indicator with the price of division 0, 01 and 0.1 mm. Method of verification
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
The Document is Referenced By:
GOST 10006-80: Metal pipes
GOST 10201-75: Rubber and rubber compounds. Method for determination of stiffness and elastic recovery by means of Defo-plastometer
GOST 102-75: Birch plywood for aircraft. Specifications
GOST 10633-2018: Wood chipboards and fibreboards. General rules for the preparation and conduct of physical and mechanical tests
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 10707-80: Steel cold shaped electrically welded tubes technical conditions
GOST 10782-85: Glass bottles for blood, transfusion and infusion preparations/compounds
GOST 11068-81: Electric-welded pipes from corrosion-resistant steel
GOST 11138-2019: Synthetic butadiene-methylstyrene rubbers SKMS-30ARKM-15 and styrene-butadiene rubbers SKS-30ARKM-15. Technical conditions
GOST 11310-2012: Chrysotiles cement pipes and couplings. Acceptance rules and test methods
GOST 11529-2016: Polyvinylchloride materials for floors. Control methods
GOST 11529-86: PVC materials for floors. Methods of control
GOST 11539-2014: Bakelized plywood. Specifications
GOST 11539-83: Bakelite resin plywood
GOST 11604-79: Synthetic latex CKД-1C. Specifications
GOST 1198-93: Asbestos brake bands
GOST 12.4.002-97: Vibration protection means for hands
GOST 12.4.141-99: Occupational safety standards system. Hand protection means, industrial clothing and materials for their manufacture. Methods for determination of cut resistance
GOST 12.4.166-2018: Occupational safety standards system. Respiratory protective devices. Facepiece. General specifications
GOST 12.4.166-85: Helmet face piece for commercial gas masks
GOST 12.4.239-2013: Occupational safety standards system. Special clothing for protection against liquid chemicals. Method for determination of resistance of air-impermeable materials to permeation by liquids
GOST 12.4.241-2013: Occupational safety standards system. Special clothing for protection from mechanical action. Method for determination of resistance to puncture
GOST 12.4.268-2014: Occupational safety standards system. Protective clothing against toxic chemicals. Method for determination of resistance to permeation by liquids and gases
GOST 1208-2014: Pressed bronze tubes. Specifications
GOST 12265-78: Rubber mold boots protecting from petroleum, petroleum products, and fats
GOST 12431-72: Wood raw material for wood press masses. Specifications
GOST 12580-78: Latex films. Method of the determination of elastic and tensile stress-strain properties
GOST 126-79: Varnished cemented rubber galoshes
GOST 12855-77: Rubber sheet for transformers. Specifications
GOST 13385-78: Dielectric polymeric footwear for special purpose. Specifications
GOST 13522-78: Synthetic latex ДMMA-65 ГП. Specifications
GOST 13715-78: Glued boards. Specifications
GOST 13913-78: Laminated wood plastics. Specifications
GOST 14037-79: Footwear with textile top, with rubber soles and platforms molded on the top
GOST 14118-85: Wire made of precision alloys, designed for elastic elements
GOST 14162-79: Steel tubes of small dimensions (capillary)
GOST 14256-2000: Electro-and heat insulating tapes. Specifications
GOST 14614-79: Plywood plus
GOST 14632-79: Multilayer and single-layer polyvinylchloride linoleum without backing. Technical requirements
GOST 14924-2019: Synthetic cis-butadiene rubbers. Technical conditions
GOST 14925-79: Cis-isoprene synthetic rubber. Specifications
GOST 15040-2016: Oxygen-free copper pipes. Specification
GOST 15080-77: Synthetic latex БC-50. Specifications
GOST 15627-2019: Synthetic butadiene-methyl styrene rubbers SKMS-30ARK and styrene butadiene SKS-30ARK. Technical specifications
GOST 15627-79: Synthetic rubbers butadiene-methylstyrene CKMC-30 APK and butadiene-styrene CKC-30 APK. Specifications
GOST 15628-2019: Synthetic butadiene-methylstyrene rubbers SKMS-30ARKM-27 and styrene-butadiene rubbers SKS-30ARKM-27. Technical conditions
GOST 15628-79: Synthetic rubbers butadiene methyl styrene CKMC-30APKM-27 and butadiene styrene CKC-30APKM-27. Specifications
GOST 15960-79: Friction flexible asbestos materials and products of them. Specifications
GOST 15960-96: Asbestos friction elastic materials
GOST 16218.1-93: Small wares. Method for determination of linear dimensions
GOST 16914-71: Rubber multilayer linoleum-resin
GOST 17133-83: Rubber sheets for articles, contacting with food stuff. Specifications
GOST 17716-91: Looking-glasses. General specifications
GOST 18108-80: Polyvinylchloride linoleum with heat and sound-insulating backing. Specifications
GOST 18124-2012: Chrysotile cement sheets are flat. Technical conditions
GOST 1820-2001: Matches. Specifications
GOST 1820-85: Matches
GOST 18376-79: Fluoroelastomers CKФ-26 and CKФ-32. Specifications
GOST 18599-2001: Polyethylene pressure pipes. Specifications
GOST 18698-79: Rubber delivery hoses with textile framework
GOST 18829-2017: Rubber o-ring seals for hydraulic and pneumatic equipment. Specifications
GOST 18829-73: Rubber o-ring seals for hydraulic and pneumatic equipment. Specifications
GOST 19147-82: Skiing sticks. Specifications
GOST 19277-2016: Seamless steel pipes, cold-deformed for oil and fuel pipelines. Specification
GOST 19478-74: Polyvinyl chloride plasticate for telephone cord insulation and shell. Specifications
GOST 19592-80: Fibre boards. Test methods
GOST 19908-90: Transparent quartz glass crucibles, basins, cups, flasks, funnels, test-tubes and caps. General specifications
GOST 19920.17-74: Stereo regular butadiene synthetic rubbers. Methods for determination of plasticity and stiffness
GOST 19920.18-74: Stereo regular butadiene synthetic rubbers. Method for determination of cold flow
GOST 19920.19-74: Stereo regular butadiene synthetic rubbers. Methods for determination of millability. Mooney viscosity and scorching qualities of rubber compounds
GOST 19920.20-74: Stereo regular butadiene synthetic rubbers. Methods for vulcanization testing
GOST 19920.7-74: Stereo regular butadiene synthetic rubbers. Method for determination of presence of mechanical inclusions and insoluble polymer impurities
GOST 20010-93: Industrial rubber gloves
GOST 20-2018: Rubber-fabric conveyer belts. Specifications
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 20403-75: Rubber. Method for determination hardness in international units (30 to 100 IRHD)
GOST 20418-75: Rubber. Methods for the determination of heat generation compression set and fatigue life for repeated compression
GOST 20571-75: Modified wood. Method for determination of shock resistance
GOST 20-85: Rubber-fabric conveyor belts
GOST 21178-2006: Glued blanks. Specifications
GOST 2162-97: Adhesive rubberized tape. Specifications
GOST 2198-76: Reinforced asbestos cloth and gaskets of it. Specifications
GOST 22596-77: Fur skins and wool-skin dressed. Mechanical test methods
GOST 22649-83: Medical air sterilizers
GOST 22689-2014: Polyethylene pipes and fittings for waste discharge inside the buildings. Specifications
GOST 22704-77: Rubber-fabric chevron seals for hydraulic units. Specifications
GOST 23492-2019: Synthetic butadiene-methylstyrene rubbers SKMS-30ARKPN and styrene-butadiene rubbers SKS-30ARKPN. Technical conditions
GOST 23492-83: Synthetic rubbers, butadiene-styrene CKC-30APKПН and butadiene-methyl styrene СKMС-30APKПН. Specifications
GOST 235-78: Rubber tubes for bicycle pumps. Specifications
GOST 24039-80: Seal sheet materials, asbestos polymer. Method of measurements of sizes and density
GOST 24950-2019: Curved bends and curve inserts on bends of the linear part of steel pipelines. Technical specifications
GOST 25018-81: Cables, wires and cords. Method of determination of mechanical characteristics of insulation and sheath
GOST 252-75: Rubber. Method of test for relative hysteresis and useful elasticity by elongation
GOST 25452-2017: High-pressure rubber hoses with metal windings without end fittings. Technical conditions
GOST 25452-90: Unarmored high-pressure rubber hoses with metal winding
GOST 25552-82: Twisted and plaited goods. Methods of tests
GOST 260-75: Rubber. Method for determination of resilience of the lacquer film on rubber surface
GOST 26149-84: Sheet floor covering on the base of chemical fibres. Specifications
GOST 26161-89: Operating tables
GOST 26221-84: Scattering suppressing linear rasters for medical roentgen apparatuses
GOST 262-93: Rubber, vulcanized. Determination of tear strength (throuser, angle and crescent test pieces)
GOST 2631-79: Materials for retreading and repairing pneumatic tyres. Specifications
GOST 263-75: Rubber. Method for the determination of Shore A hardness
GOST 26585-2003: Giant and super giant pneumatic tyres for off-the-road trucks. Specifications
GOST 26585-85: Large-sized pneumatic tires for off-road quarry automobiles
GOST 26589-94: Roofing and waterproof mastics. Methods of testing
GOST 2678-94: Rolled roofing and waterproof materials. Methods of testing
GOST 26816-2016: Cement-bonded wood boards. Specifications
GOST 26816-86: Cement-bonded wood boards. Specifications
GOST 26877-2008: Metal products. Methods of measuring form variations
GOST 26877-91: Metal products
GOST 26891-86: Aerosol valves, spray heads and caps
GOST 27019-2016: Rolled polymer materials for floors. Method of rapid determination of sound-insulation properties
GOST 27019-86: Rolled polymer materials for floors. Method of rapid determination of sound-insulation properties
GOST 270-75: Rubber. Method of the determination elastic and tensile stress-strain properties
GOST 27180-2001: Ceramic tiles. Test methods
GOST 27680-88: Particle and fibre boards. Methods of shape and dimensions control
GOST 28015-89: One-layer wooden floor panels. Technical requirements
GOST 28131-89: Dentist` s chairs
GOST 2850-2022: Chrysotile cardboard. Technical specifications
GOST 2850-95: Asbestos paperboard
GOST 28965-91: Zipper. Methods of checking
GOST 2977-82: Planed veneer. Specifications
GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications
GOST 30340-2012: Corrugated chrysotile cement sheets. Specifications
GOST 30548-97: Bonded fabrics (base) for linoleum
GOST 30563-98: Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications
GOST 30564-98: Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications
GOST 30684-2000: Asbestos and non-asbestos gasket materials. Method of testing of tensile strength
GOST 30765-2001: Metal transport packagings. General specifications
GOST 31014-2002: Glass filled poliamides profils. Specifications
GOST 31284-2004: Air heaters for industrial and agricultural enterprises. General specifications.
GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST 314-72: Felt, felt parts, felt piece goods. Acceptance rules and test methods
GOST 31619-2012: Implantable mammary prostheses. General technical requirements. Test methods
GOST 31624-2012: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications
GOST 31625-2012: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications
GOST 32078-2013: Dressed fur and sheepskins. Method of determining shrinkage temperature
GOST 32158-2013: Plywood with outer layers of miter splicing veneer for use in construction specifications
GOST 32289-2013: Wood particleboards, laminated with paper impregnated with thermosetting resins
GOST 32304-2013: Laminate flooring based on dry process wood fibreboards. Specifications
GOST 32412-2013: Unplasticized polyvinylchloride pipes and fittings for waste discharge inside the buildings. Specifications
GOST 32413-2013: Unplasticized polyvinylchloride pipes and fittings for sewerage and drainage systems outside the buildings. Specifications
GOST 32414-2013: Polypropylene pipes and fittings for waste discharge inside the buildings. Specifications
GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 32661-2014: Fibrе reinforced thermosetting plastic pipes and parts of pipelines. General specifications
GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.
GOST 32758-2014: Public roads. Temporary technical means of traffic management. Specifications and rules for use
GOST 32972-2014: Plastic manholes for sewerage and drainage systems. Specifications
GOST 3302-83: Rubber ice-bags
GOST 3302-95: Rubber ice-bags. Specification
GOST 3303-82: Rubber hot-water bottles
GOST 3303-94: Rabber hot-water bottles. Specifications
GOST 33065-2014: Plywood for truck, car, container building. Specifications
GOST 33123-2014: Pipe culverts made of polymer composites. Specifications
GOST 33188-2014: Clutches of traction drive of multiple wagon rolling stock. Rubber-cord casing. General specifications
GOST 33225-2015: Footwear. Methods for determining linear dimensions
GOST 33228-2015: Steel welded pipes for general purposes. Specifications
GOST 33229-2015: Tubes for boiler and heat exchanging equipment. Technical specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 C
GOST 33267-2015: Dressed fur and sheepskins. Mechanical test methods
GOST 33590-2015: Souvenir matches. General specifications
GOST 34078-2017: Rail fasteners pads of railway. Specifications
GOST 34519-2019: Industrial chimney and ventilation pipes. Rules for the organization and production of work, monitoring of performance and requirements for the results of work
GOST 34734-2021: Personal protective equipment for firefighter's feet. General technical requirements. Test methods
GOST 34861-2022: Non-asbestos sealing sheets and gaskets made of them. Technical conditions
GOST 38-72: Rubber packing rings for joining heads of brake hoses and end cocks of autobrakes. Specifications
GOST 3-88: Surgical rubber gloves
GOST 3916.1-2018: Plywood for general use with outer layers of deciduous veneer. Specifications
GOST 3916.1-96: Plywood with external layers of deciduous veneer for general use
GOST 3916.2-2018: Plywood for general use with outer layers of coniferous veneer. Specifications
GOST 3916.2-96: General purpose plywood with coniferous veneer
GOST 415-75: Rubber and rubber mixes. Method for determination of plasticity by means of plastometer
GOST 422-75: Rubber for shoes bottom. Methods of tests for repeated flexing
GOST 4248-2018: Chrysotile cement non-arcing boards for electrical purposes (ACEID). Specifications
GOST 4645-81: Rubber condoms
GOST 4754-97: Pneumatic tyres for passenger cars, trailers for them, light-duty trucks and buses of especially small capacity. Specifications
GOST 480-78: Asbestos cellulose filtering and sterilizing plates. Specifications
GOST 494-90: Pipes of brass
GOST 5005-82: Electric-welded cold-worked steel pipes for cardan shafts
GOST 5152-84: Gland Packing Specifications
GOST 5170-73: Repair kits for pneumatic tyres. Specifications
GOST 5244-79: Wood chips
GOST 5375-79: Rubber moulded boots. Specifications
GOST 5398-76: Textile reinforced pressure-suction rubber hoses without fittings. Specifications
GOST 5496-78: Rubber technical tubes. Specifications
GOST 5513-97: Pneumatic tiers for trucks, trailers fot them, buses and rtolleybuses
GOST 5813-2015: Fan v-belts and pulleys for engines of cars, tractors and combines. Requirements and test methods
GOST 617-90: Copper tubes. Specifications
GOST 6235-2020: Nickel sheets and strips. Specifications
GOST 6235-91: Strips and ribbons of nickel. Specifications
GOST 6266-97: Gypsum plasterboards
GOST 6286-2017: High pressure rubber hoses with metal braids without end fittings. Technical conditions
GOST 6286-73: High-pressure rubber hoses with metal braids without fittings
GOST 6410-80: Cemented rubber and textile-and-rubber overshoes, halfboots and boots
GOST 6467-79: Vulcanized rubber cords of round and square cross-sections. Specifications
GOST 7370-2015: Railway frogs. Specifications
GOST 7463-2003: Pneumatic tyres for tractors and agricultural machinery. Specifications
GOST 7463-89: Pneumatic tires for tractors and agricultural machines
GOST 7912-74: Rubber. The method for the determination of brittle temperature
GOST 7926-75: Rubber for shoes bottom. The methods of testing
GOST 8430-2003: Pneumatic tyres for earthmoving, loading and mining machines. Specifications
GOST 8430-85: Pneumatic tyres for earthmoving, loading, and mining machines. Specifications
GOST 862.1-2020: Parquet products. Massive parquet. Technical conditions
GOST 862.1-85: Floor parquet production. Block parquet. Technical requirements
GOST 862.2-85: Floor parquet products. Mosaic parquet. Specifications
GOST 862.3-2020: Parquet products. Multilayer parquet. Technical conditions
GOST 862.3-86: Floor parquet products. Parquet boards. Technical requirements
GOST 862.4-2020: Parquet products. Parquet shields. Technical conditions
GOST 862.4-87: Floor parquet products. Parquet panels. Technical requirements
GOST 8673-2018: Plywood panels. Specifications
GOST 8673-93: Plywood panels
GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications
GOST 8747-88: Asbestos-cement sheet products. Test methods
GOST 8894-2018: Glass pipes. Specifications
GOST 8978-75: Artificial leather and films. Methods of determination of stability of repeated flexing
GOST 9.026-74: Unified system of corrosion and ageing protection. Vulcanized rubber. Method of accelerated determination to ozone and thermolightozone resistance
GOST 9.030-74: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing resistance to attack by corrosive media in limp state
GOST 9.066-76: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of ageing resistance testing under weather conditions
GOST 9.704-80: Unified system of corrosion and ageing protection. Vulcanized rubbers. Methods of determination of the packing parts for the fixed joints working capacity during the radiation-thermal ageing
GOST 9.719-94: Unified system of corrosion and ageing protection. Polymeric materials. Methods of ageing tests under the influence of moist heat, aqueous and salt spray
GOST 9155-88: Rubber and rubber-and-textile athletic footwear
GOST 9186-76: Cardboard for footwear and details made of the same. Rules of acceptance and test methods
GOST 9272-2017: Hollow glass blocks. Specifications
GOST 9272-81: Hollow glass blocks. Specifications
GOST 9356-75: Rubber hoses for gas welding and metal cutting. Specifications
GOST 938.19-71: Leather. Method of tear strength testing
GOST 938.20-71: Leather. Method of measurement of apparent density
GOST 9620-94: Laminated glued wood. Sampling and general requirements in testing
GOST 9621-72: Laminated glued wood. Methods for determination of physical properties
GOST 9622-2016: Laminated wood. Methods for determining the tensile strength and modulus of tensile elasticity
GOST 9622-87: Laminated glued wood. Methods for determination of ultimate strength and modulus of elasticity in tension
GOST 9623-87: Laminated glued wood. Method for determination of ultimate strength and modulus of elasticity in compression
GOST 9624-2009: Laminated glued wood. Method for determination of shear strength
GOST 9624-93: Laminated glued wood method for determination of shear strength
GOST 9625-2013: Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
GOST 9625-87: Laminated glued wood. Method for determination of strength and elasticity module in static bending
GOST 99-2016: Veneer peeled. Technical conditions
GOST 9941-2022: Cold-deformed seamless pipes made of corrosion-resistant high-alloy steels. Technical conditions
GOST 9982-76: Rubber. Determination of stress relaxation in compression
GOST 99-96: Rotary cut veneer
GOST R 12.4.197-99: Occupational safety standards system. Special clothing for protection against liquid chemicals. Method for determination of resistance of air-impermeable materials to permeation by liquids
GOST R 12.4.198-99: Occupational safety standards system. Special clothing for protection from mechanical action. Method for determination of resistance to puncture
GOST R 12.4.260-2011: Occupational safety standards system. Special clothing for protection from mechanical action. Method for determination of resistance to puncture
GOST R 12.4.262-2011: Occupational safety standards system. Protective clothing against toxic chemicals. Method for determination of resistance to permeation by liquids and gases
GOST R 12.4.284-2013: Occupational safety standards system. Insulating suits. Method for determination the resistance of protective materials to abrasion
GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications
GOST R 50838-95: Polyethylene pipes for the supply of gaseous fuel. Specifications
GOST R 51049-2008: Fire equipment. Pressure fire hoses. General technical requirements. Test methods
GOST R 51049-2019: Fire fighting equipment. Pressure head fire hoses. General technical requirements. Test methods
GOST R 51396-99: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications
GOST R 51397-99: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications
GOST R 51613-2000: Pressure pipes made of unplasticized polyvinylchloride. Specifications
GOST R 51829-2022: Gypsum fiberboard sheets and products based on them. Technical specifications
GOST R 51970-2002: Ski-poles for walk and sport race skiing. Specifications
GOST R 52078-2003: Wood particle boards, laminated with paper impregnated with thermosetting resins
GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST R 52114-2003: Units mechanics of upper-limb prostheses. Technical requirements and test methods
GOST R 52114-2009: Units mechanics of upper-limb prostheses. Technical requirements and test methods
GOST R 52203-2004: Tubing and coupling. Specifications
GOST R 52484-2005: Souvenir matches. General specifications
GOST R 52664-2010: Welded pipe sheet piles. Specifications
GOST R 52899-2007: Pneumatic tyres for truck power-driven vehicles and trailers. Specifications
GOST R 52900-2007: Pneumatic tyres for passenger cars and trailers for them. Specifications
GOST R 52957-2008: Dressed fur and sheepskins. Mechanical test methods
GOST R 52959-2008: Dressed fur and sheepskins. Method of determining the shrinkage temperature
GOST R 53000-2008: Implantable mammary prostheses. General technical requirements. Test methods
GOST R 53201-2008: Fibre-glass plastic pipes and fittings. Specifications
GOST R 53201-2023: Composite polymer pipes and fittings with threaded joints for pressure and non-pressure pipelines. Technical conditions
GOST R 53223-2016: Chrysotile cement slabs for wall facing. Specifications
GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications
GOST R 53821-2010: Vehicles. Diaphragms and plate membranes. Technical requirements and test methods
GOST R 53920-2010: Laminated plywood. Specifications
GOST R 54086-2010: Pressure regulators. General specifications
GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications
GOST R 54475-2011: Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
GOST R 54553-2011: Rubber, vulcanized and thermoplastic elastomers. Determination of tensile stress-strain properties
GOST R 54553-2019: Rubber and thermoplastic elastomers. Determination of tensile properties
GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications
GOST R 54560-2015: Fibre reinforced thermosetting plastic pipes and parts of pipelines. Specifications
GOST R 54574-2011: Steel drums for paint materials. Specifications
GOST R 54592-2011: Foot-wear. Methods for determination of linear dimensions
GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 54864-2016: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 54913-2012: Modified wood. Method for determination of pressure in swelling
GOST R 54929-2012: Steel welded pipes for general purposes. Specifications
GOST R 54936-2012: Implants for surgery. End expanders. General technical requirements. Test methods
GOST R 55075-2012: Sections of pipelines derived from composite materials intended for installation and rehabilitation of public water and wastewater systems. Specifications
GOST R 55398-2013: Reinforced bitumen sheets for waterproofing of bridge decks. Method for determination of thickness and mass per unit area
GOST R 55442-2013: Tubes for boiler and heat exchanging equipment. Specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 °C
GOST R 55735-2013: Mining equipment. High pressure mine rubber hoses with metallic tapings and metallic braidings with fitting. Safety requirements and test methods
GOST R 55946-2014: Saving means of crews of engineering installations operated in water areas, personal. General specifications
GOST R 56277-2014: Polymer composite pipes and fittings for intrafield pipelines. Specifications
GOST R 56291-2014: Rail fasteners pads of railway. Specifications
GOST R 56388-2015: Matches for hunting. Specifications
GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications
GOST R 56594-2015: Hot-deformed seamless pipes made of corrosion-resistant high-alloy steel. Specifications
GOST R 56613-2015: Production of non-combustible and rotting modified wood. Specifications
GOST R 56904-2016: Steel cord conveyor belts for mining industry. General specifications
GOST R 57177-2016: The induction-metallurgical method of surfacing. Technological process
GOST R 57178-2016: Electric-contact method of surface hardening of details. Typical technological process
GOST R 57423-2017: Tubes for boiler and heat exchanging equipment. Part 2. Seamless steel tubes for pressure purposes more 6, 4 MPa and temperatures exceeding 400 °C. Specifications
GOST R 57529-2017: Saving means for crew of installations operated on water areas. Inflatable means for mass collection of floating people. General specifications
GOST R 57942-2017: Polymer composite sheet piles. General technical requirements and test methods
GOST R 58064-2018: Steel welded pipes for building structure. Technical specifications
GOST R 58237-2018: Intestinal stoma care products: ostomy bags, assistive products and skin care products around the stoma. Characteristics and basic requirements. Test method
GOST R 58237-2022: Intestinal stoma care products: colostomy bags, aids and skin care products around the stoma. Characteristics and basic requirements. Test methods
GOST R 58280.2-2018: Medical Products. Equipment for thermal disinfection / disposal of medical waste. Dry hot air method and saturated water vapor method. Part 2. Control and test methods
GOST R 58386-2019: Sheathed ropes for prestressed structures. Technical specifications
GOST R 58714-2019: The main pipeline transport of oil and oil products. Pipelines from flexible flat sleeves. General specifications
GOST R 58725-2019: Covers sports rubber rolled. Technical specifications
GOST R 58726-2019: Polymer and rubber tile coatings. Technical specifications
GOST R 70058-2022: Water-windproof matches. Technical specifications
GOST R 70266-2022: Transparent enclosing structures. Sealing of joints to load-bearing structures and wall openings. Rules and control of work performance
GOST R 70604-2022: Equipment for boxing. Bags. Technical conditions
GOST R 70707-2023: Compact units for treatment of domestic wastewater. General technical conditions
GOST R 70731.1-2023: Steel pipes for manufacturing of equipment and pipelines for nuclear power plants. General specifications. Part 1. Seamless steel pipes of non-alloy and alloy steels.
GOST R 70731.2-2023: Steel pipes for manufacture of equipment and pipelines of nuclear power plants. General technical conditions. Part 2. Seamless steel pipes from austenitic class steel of 08Х18Н10Т and 08Х18Н10Т-Ш grades
GOST R 70731.3-2023: Steel pipes for manufacture of equipment and pipelines of nuclear power plants. General technical conditions. Part 3. Longitudinal welded steel pipes of unalloyed and alloyed steel
GOST R 70731.4-2023: Steel pipes for manufacture of equipment and pipelines of nuclear power plants. General technical conditions. Part 4. Longitudinal welded steel pipes made of 08Х18Н10Т austenitic class steel.
GOST R ISO 2303-2003: Isoprene rubber (IR). Nоn-oil-extended, solution-polymerized types. Evaluation procedure
ITP 52-89: Instructions for the design of enterprises for the primary processing of flax
MI 1724-87: Guidelines. State system for ensuring uniformity of measurements. Thickness gauge indicator with the price division of 0.01 and 0.1 mm. Method of verification
MI 2314-2000: Recommendation. GSOEI. Codifier of groups of measuring instruments
MU 2002-2002: Methodology for examining the technical condition of cabinet elevators for drill and casing KM type and cast elevators for casing EN type to determine the possibility of their further operation
MU 9001.00.001: Diagnostic technique for Romanian fountain fittings that have worked out their standard service life
NB ZhT TsV-TsT 078-2003: Rubber sealing elements of rolling stocks brake pneumatic system. Safety norms
ODM 218.2.046-2014: Recommendations on the selection and quality control of geosynthetic materials used in construction
ODM 218.5.006-2010: Recommendations on testing methods for geosynthetic materials, depending on their field of application in the road sector
OST 108.030.133-84: Pipe elements of steam boiler heat surfaces under pressure less than 4 MPA, water boilers and heat-recovery boilers. Technical requirements, acceptance and control methods.
PNST 394-2020: Steel pipes for the manufacture of equipment and pipelines of nuclear plants. General specifications. Part 1. Seamless steel pipes from unalloyed and alloyed steels
PNST 453-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 2. Seamless steel pipes of austenitic steel grades 08Х18Н10Т and 08Х18Н10Т-Ш
PNST 454-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 3. Longitudinal welded steel pipes of unalloyed and alloyed steel
PNST 455-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 4. Longitudinal welded steel pipes made of austenitic steel grade 08Х18Н10Т
PNST 456-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 5. Longitudinal welded cold-worked steel pipes of austenitic class steel
PNST 683-2023: Oil and gas industry. Underwater production systems. Tubes from austenitic-ferritic corrosion-resistant steel. Technical specifications
RD 15-13-2008: Guidelines for the examination of industrial safety of compressor installations used in coal mines and mines
RD 15-14-2008: Guidelines for the examination of the industrial safety of single-bucket excavators
RD 24.023.52-90: Products of chemical engineering. Gumming. Typical technological process.
RD BGEI 37-01: Metrological support. The list of instruments and equipment of the calibration laboratory for cartographic work
RD-15-15-2008: Guidelines on the procedure for conducting industrial safety expertise of mine electric locomotives
SP 83.13330.2016: Industrial furnaces and brick chimneys
STB 1432-2003: Hats. General specifications
STB 1679-2006: Cultivators for inter-row tillage. General specifications
TU 13.03-011-00212179-2003: Spiral-welded electric-welded pipes made of carbon steel 20 for pipelines of nuclear power plants. Technical conditions
TU 13-600-2-05-85: Tags. Technical conditions
TU 13-600-2-10-86: Parts of the floors and walls of country houses. Technical conditions
TU 1381-003-47966425-2006: Steel electric-welded steel pipes with an outer diameter of 610 - 1420 mm for gas pipelines for operating pressures up to 9.8 MPa
TU 14-3-1573-96: Steel electric welded longitudinal pipes with a diameter of 530-1020 mm with a wall thickness of up to 32 mm for main gas pipelines, oil pipelines and oil product pipelines
TU 14-3-190-2004: Seamless steel pipes for boiler plants and pipelines
TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions
TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines
TU 14-3R-56-2001: Welded steel pipes with a diameter of 1420, 1620, 1720, 2020 and 2220 mm for general use. Technical conditions
TU 2245-011-44271562-2004: Cuff thermo-shrinkable "Therma-STMP". Technical conditions
TU 2246-004-56755147-2006: Rock sheet polymer to protect the insulated surface of pipelines. Technical conditions
TU 2531-005-01297858-2000: Sealing cuffs for pipelines over roads and railways laid in a protective case (casing)
TU 2531-007-01297858-02: Rubber-sealing cuffs for pipelines over roads and railways, laid in a protective case (casing)
TU 36-1496-85: Cable prefabricated structures. Technical conditions
TU 36-2072-86: Boxes of lingering. Technical conditions
TU 38 0051166-98: Rubber compounds for the rubber products of aircraft
TU 38-105116-81: Rubber plate for sealing gaskets of vacuum systems
TU 38-105867-90: Technical porous plate with two films
TU 5361-002-39430024-07: Hardwood boards
TU 5768-003-3896258-06: Tapes steam insulation self-adhesive "GerFen Izol" for construction purposes
TU 83 97-019-01297858-OP1-99: Rock sheet to protect the insulated surface of pipelines (for an experimental batch). Technical conditions
TU 95 1613-01: Polyethylene heat shrink tubes. Technical conditions
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.