GOST 28473-90

ГОСТ 28473-90

Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

Чугун, сталь, ферросплавы, хром, марганец металлические. Общие требования к методам анализа

Status: Effective. The limitation of the effectiveness period has been lifted: Resolution of the State Standard No. 776 of 06/03/91

This standard establishes the general requirements for chemical and physico-chemical methods of analysis of iron, steel, ferroalloys, chromium and manganese metal.

Настоящий стандарт устанавливает общие требования к химическим и физико-химическим методам анализа чугуна, стали, ферросплавов, хрома и марганца металлических

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 7

Approved: Gosstandart of the USSR, 3/23/1990

SKU: RUSS52817

Price: $204.60




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.1 Ferrous metals »

ISO classifier » 77 METALLURGY » 77.040 Metal Testing » 77.040.30 Chemical analysis of metals »

National standards » 77 METALLURGY » 77.040 Metal Testing » 77.040.30 Chemical analysis of metals »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V3 Steel quality and high quality (quality stock) » V39 Test methods. Packaging. Marking »

National Standards for OKSTU » CAST IRON, FERRO ALLOYS, STEEL » Control methods (testing, analysis, measurements) »


As a Replacement Of:

GOST 16412.0-80: Iron powder. General requirements for methods of analysis

GOST 20560-81: Alloy and high-alloy steels. General requirements for methods of analysis

GOST 2604.0-77: Alloy cast iron. General requirement for methods of chemical analysis

GOST 27349-87: Ferroalloys, metal chromium and metal manganese. General requirements for the methods of chemical and physiochemical analysis

The Document References:

GOST 17260-87: Ferroalloys, metal chromium and metal manganese. General rules for sampling and sample preparation for chemical analysis

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 24104-2001: Laboratory scales. General technical requirements

GOST 24104-88: General purpose and reference laboratory balances

GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions

GOST 27025-86: Reagents. General test requirements

GOST 29169-91: Laboratory glassware. One-mark pipettes

GOST 29227-91: Laboratory glassware. Graduated pipettes. Part 1. General requirements

GOST 29228-91: Laboratory glassware. Graduated pipettes. Part 2. Pipettes for which no waiting time is specified

GOST 29229-91: Laboratory glassware. Graduated pipettes. Part 3. Pipettes for which a waiting time of 15 s is specified

GOST 29251-91: Laboratory glassware. Burettes. Part 1. General requirements

GOST 29252-91: Laboratory glassware. Burettes. Part 2. Burettes for which no waiting time is specified

GOST 29253-91: Laboratory glassware. Burettes. Part 3. Burettes for which a waiting time of 30 s is specified

GOST 6563-75: Technical articles made of noble metals and their alloys. Specifications

GOST 6709-72: Distilled water. Specifications

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 8.234-77: State system for ensuring the uniformity of measurements. Volumetric glass ware. Methods and means of verification

GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications

The Document is Referenced By:

FTS ZhT TsT 028-99: Brake block holders of the locomotives for main-line railways. Certification requirements

GOST 10160-75: Magnetically soft precision alloys

GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification

GOST 10533-86: Cold-rolled thermostatic bimetal strip

GOST 10543-82: Surfacing steal wire. Specifications

GOST 10543-98: Steel surfacing wire. Specifications

GOST 10702-2016: Rolled high-quality structural non-alloy and alloy steel for cold forging. General specifications

GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications

GOST 1071-81: Heat treated steel spring wire

GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets

GOST 10994-74: Precision alloys. Grades.

GOST 11068-81: Electric-welded pipes from corrosion-resistant steel

GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel

GOST 11269-76: Universal rolled plates and wide strips made of special purpose structural high-grade Alloy steel

GOST 11474-76: Bent-steel sections. Specifications

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12351-81: Steels alloyed and highalloyed. Methods for the determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic

GOST 12358-82: Steels alloyed and highalloyed. Methods for the determination of arsinic

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 12766.1-90: High electrical resistant wire made of precision alloys

GOST 12766.2-90: Strip from precision high electric resistance alloys

GOST 12766.3-90: Precision gauged alloys of high electric resistance

GOST 12766.4-90: Graded rolled stock of precision alloys of high electrical resistance

GOST 12766.5-90: Flattened strip of high electric resistance precision alloys

GOST 13151.10-82: Ferromolybdenum. Method for determination of antimony

GOST 13151.2-82: Ferromolybdenum. Methods for determination of tungsten

GOST 13151.6-94: Ferromolybdenum. Method for determination of phosphorus

GOST 13151.7-82: Ferromolybdenum. Methods for determination of copper

GOST 13151.9-82: Ferromolybdenum. Methods for determination of tin

GOST 13201.1-93: Ferrosilicochromium. Method for determination of chromium

GOST 13217.1-90: Ferrovanadium. Method for determination of vanadium

GOST 13230.1-93: Ferrosilicon. Methods for determination of silicon

GOST 13230.4-93: Ferrosilicon. Method for determination of phosphorus

GOST 13230.5-93: Ferrosilicon. Methods for determination of manganese

GOST 13230.6-93: Ferrosilicon. Methods for determination of chromium

GOST 13230.7-93: Ferrosilicon. Methods for determination of aluminium

GOST 13230.8-93: Ferrosilicon. Methods for determination of calcium

GOST 13230.9-93: Ferrosilicon. Methods for determination of titanium

GOST 13877-96: Sucker rods and sucker rod couplings. Specifications

GOST 14021.1-78: Ferroboron. Methods for the determination of boron

GOST 14021.4-78: Ferroboron. Methods for the determination of silicon

GOST 14021.5-78: Ferroboron. Method for the determination of phosphorus

GOST 14021.6-78: Ferroboron. Methods for the determination of manganese

GOST 14021.7-78: Ferroboron. Methods for the determination of copper

GOST 14021.8-78: Ferroboron. Methods for the determination of aluminium

GOST 14080-78: Precision alloy strip with specified temperature coefficient of linear expansion. Specifications

GOST 14081-78: Wire of precision alloys with specified temperature coefficient of linear expansion. Specifications

GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications

GOST 14117-85: Strip made from precision alloys for elastic elements

GOST 14118-85: Wire made of precision alloys, designed for elastic elements

GOST 14119-85: Rods from precision alloys for elastic elements

GOST 1414-75: Construction steel with enhanced and high machinability

GOST 14162-79: Steel tubes of small dimensions (capillary)

GOST 14250.10-80: Ferrotitanium. Methods for determination of tin

GOST 14250.11-80: Ferrotitanium. Methods for determination of zirconium

GOST 14250.12-85: Ferrotitanium. Methods of chromium determination

GOST 14250.13-85: Ferrotitanium. Methods of manganese determination

GOST 14250.1-90: Ferrotitanium. Method for determination of titanium

GOST 14250.4-90: Ferrotitanium. Method for determination of phosphorus

GOST 14250.5-90: Ferrotitanium. Methods for determination of copper

GOST 14250.6-90: Ferrotitanium. Method for determination of aluminium

GOST 14250.7-90: Ferrotitanium. Method for determination of silicon

GOST 14250.8-80: Ferrotitanium. Methods for determination of vanadium

GOST 14250.9-80: Ferrotitanium. Methods for determination of molybdenum

GOST 14858.3-81: Silicocalcium. Method for the determination of phosphorus content

GOST 14858.4-91: Silicocalcium. Method for the determination of silicon

GOST 14858.5-81: Silicocalcium. Method for the determination of iron content

GOST 14858.6-91: Silicocalcium. Method for the determination of calcium

GOST 14858.7-91: Silicocalcium. Methods for the determination of aluminium

GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications

GOST 14959-79: Spring carbon and alloy steel bars. Specifications

GOST 1577-93: Plate and broadband roll stock of construction fine steel.

GOST 1585-85: Bearing cast iron for molding

GOST 15933.3-90: Ferroniobium. Method for determination of phosphorus

GOST 15933.4-90: Ferroniobium. Method for determination of silicon

GOST 15933.5-90: Ferroniobium. Method for determination of niobium and tantalum sum

GOST 15933.6-90: Ferroniobium. Method for determination of tantalum

GOST 15933.7-90: Ferroniobium. Method for determination of aluminium

GOST 15933.8-90: Ferroniobium. Method for determination of titanium

GOST 16412.2-91: Iron powder. Methods for the determination of phosphorus

GOST 16412.3-91: Iron powder. Methods for the determination of silicon

GOST 16412.4-91: Iron powder. Methods for the determination of manganese

GOST 16412.5-91: Iron powder. Methods for the determination of sulphur

GOST 16412.7-91: Iron powder. Methods for the determination of carbon

GOST 16412.8-91: Iron powder. Method for the determination of insoluble residue

GOST 16412.9-91: Iron powder. Method of photoelectric spectral analysis of silicon, manganese and phosphorus

GOST 16591.3-94: Ferro-silico-manganese. Methods for determination of manganese

GOST 16591.4-87: Silicomanganese. Methods for determination of silicon

GOST 16591.5-94: Ferro-silico-manganese. Method for determination of phosphorus

GOST 16698.12-84: Metallic manganese and nitrated metallic manganese. Method for determination of calcium and magnesium

GOST 16698.13-93: Metallic manganese and nitrated manganese. Method for determination of nitrogen

GOST 16698.1-93: Manganese metal and manganese nitrated. Method for determination of manganese

GOST 16698.4-93: Metallic manganese and nitrated manganese. Methods for determination of phosphorus

GOST 16698.5-93: Metallic manganese and nitrated manganese. Methods for determination of silicon

GOST 16698.6-93: Metallic manganese and nitrated manganese. Methods for determination of iron

GOST 17051-82: Alloyed and high-alloyed steels. Methods for determination of tantalum

GOST 17066-80: Low-alloyed structural steel sheets and strips in coils. Marks and technical requirements

GOST 17066-94: Thin sheet rolled stock of high strength steel

GOST 18143-72: Corrosion resistant

GOST 18834-83: Magnetic wire for recording harmonic signals

GOST 19265-73: Bars and strips out of high-speed steel. Specifications

GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications

GOST 19281-2014: High strength rolled steel. General specification

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 20072-74: Heat-resistant steel

GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications

GOST 21022-75: Chromic steel for precise bearings. Specifications

GOST 21876.4-76: Ferromanganese. Method for the determination of silicon

GOST 2246-70: Welding steel wire. Specifications

GOST 22703-91: Moulded pieces of automatic coupler equipment for 1520 mm gauge railway rolling stock. General specifications

GOST 2283-79: Cold-rolled tape made of tool steel and spring steel

GOST 23522-79: Cold-rolled strip for hack saws. Specifications

GOST 23705-79: Hot-rolled and forged high-temperature alloy bars

GOST 24018.7-91: Nickel-based fire-resistant alloys. Methods for the determination of carbon

GOST 24018.8-91: Nickel-based fire-resistant alloys. Methods for the determination of sulphur

GOST 25054-81: Forgings made of corrosion-resistant steels and alloys

GOST 2604.10-77: Alloy cast iron. Method for determination of titanium

GOST 2604.11-85: Alloy cast iron. Methods for determination of arsenic

GOST 2604.13-82: Alloy cast iron. Methods for determination of aluminium

GOST 2604.14-82: Alloy cast iron. Methods for determination of cobalt

GOST 2604.1-77: Alloy cast iron. Methods for determination of carbon

GOST 2604.2-86: Alloy cast iron. Methods for determination of sulphur

GOST 2604.3-83: Alloy cast iron. Methods for determination of silicon

GOST 2604.4-87: Alloy cast iron. Methods for determination of phosphorus

GOST 2604.5-84: Alloy cast iron. Methods for determination of manganese

GOST 2604.6-77: Alloy cast iron. Methods for determination of chromium content

GOST 2604.7-84: Alloy cast iron. Methods for determination of vanadium

GOST 2604.8-77: Alloy cast iron. Methods for determination of nickel

GOST 2604.9-83: Alloy cast iron. Methods for determination of copper

GOST 26131-84: Heat-resisting steel forgings. General specifications

GOST 27041-86: Ferroalloys, metal chromium and metal manganese. Methods of sulphur determination

GOST 27069-86: Ferroalloys, metal chromium and metal manganese. Methods for determination of carbon

GOST 27772-2015: Structural steel structure rolled products. General specifications

GOST 27772-88: structural steel structure rolled products. General specifications

GOST 2787-75: Recycled ferrous metals

GOST 28393-89: PM bars and strips of high-speed steel. General specifications

GOST 29095-91: Nickel-based precision, corrosion-resistant, heat-resistant alloys and powders. Methods of iron determination

GOST 29117-91: Alloyed and high-alloyed steels. Methods of bismuth determination

GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications

GOST 30563-98: Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications

GOST 30564-98: Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications

GOST 31443-2012: Steel pipes for crafts pipelines. Specifications

GOST 31623-2012: XK62M6L alloy cast rods for artificial joints. Specifications

GOST 31624-2012: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications

GOST 31625-2012: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

GOST 31825-2012: Sucker rods, mouth stocks and couplings for them. Specifications

GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications

GOST 4041-2017: Hot-rolled thick-rolled for cold stamping from non-alloyed constructional quality steel. Technical conditions

GOST 4041-71: Rolled plates of high quality structural steel for cold stamping

GOST 4543-2016: Metal products from structural alloy steel. Specification

GOST 4543-71: Structural alloyed steel

GOST 4986-79: Cold-rolled band from corrosion-resistant and heat-resistant steel

GOST 5497-80: Cold-rolled steel strip for saws of cotton-scrubbing machines

GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications

GOST 5520-2017: Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications

GOST 5950-73: Bars and strips from a toolhouse steel alloy

GOST 6008-90: Metallic manganese and nitrided manganese

GOST 6713-75: Low-alloyed structural rolled stock for bridge building. Specifications

GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 7769-82: Alloyed cast iron for castings with special properties

GOST 7909-56: Drill prospecting pipes and coupling to them

GOST 8.315-91: State system for ensuring the uniformity of measuring. Reference materials. Basic principles, ways of development, certification, approval, registration and use

GOST 801-78: Bearing steel. Specifications

GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements

GOST 8803-89: Round finer wire made of precision alloys with high electrical resistivity for resistive elements

GOST 9124-85: Binding tin-coated steel wire

GOST 9849-86: Iron powder. Specifications

GOST R 50424-92: Steel and iron. Method for determination of calcium

GOST R 51013-97: Nickel based fire-resistant, corrosion-resistant, precision alloys. Methods for titanium determination

GOST R 51056-97: Alloyed and high-alloyed steel. Atomic emission spectrometry method of determination of tungsten and molybdenum

GOST R 51161-2002: Sucker rods, mouth stocks and couplings for them. Specifications

GOST R 51395-99: ХК62М6Л alloy cast rods for artificial joints. Specifications

GOST R 51396-99: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications

GOST R 51397-99: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

GOST R 51576-2000: Heat-proof, corrosion-resistant, precision alloys and powders on the basis of nickel. Methods of copper determination

GOST R 51681-2000: Pneumatic hammer drills. Drill steels. General technical requirements

GOST R 51927-2002: Steel and cast iron. Atomic emission with inductively coupled plasma spectral method of calcium determination

GOST R 51928-2002: Nickel-based fire-resistant alloys. Methods for determination of boron

GOST R 52544-2006: Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications

GOST R 52927-2008: Rolled stock of normal, increased- and high-strength steel for shipbuilding. Specifications

GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications

GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications

GOST R 53580-2009: Steel pipes for crafts pipelines. Specifications

GOST R 53809-2010: Automobile engines. Cylinder liners. Technical requirements and test methods

GOST R 53810-2010: Automobile engines. Valves. Technical requirements and test methods

GOST R 53812-2010: Automobile engines. Valve tappets. Technical requirements and test methods

GOST R 53932-2010: Tube billet. General specifications

GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications

GOST R 55079-2012: Steel. Method of inductively coupled plasma atomic-emission analysis

GOST R 55374-2012: Alloyed structural rolled steel for bridge building. General specifications

GOST R 56299-2014: Rolled products from bearing steel. Specifications

GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure

GOST R 57837-2017: Hot-rolled steel I-beams with parallel edges of flanges. Specifications

GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements

OST 108.004.10-86: Quality control program of nuclear energetics products.

OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.

R 50.2.090-2013: State system for ensuring the uniformity of measurements. Quantitative chemical analysis procedures. General requirements for development, certification and application

RD EO 0505-03: Instructions for metal styloscope

RDM 929-01-93: Certificate for measuring the mass fraction of carbon by the gas-exchange method in cast iron of unalloyed, carbon, alloyed and high-alloyed steel when controlling starting materials

RDM 929-02-93: Certificate for the method of measuring the mass fraction of sulfur in the cast iron of unalloyed, carbon, alloyed and high-alloyed steel in the control of raw materials

RDM 929-03-93: Certificate for the method of measuring the mass fraction of phosphorus in unalloyed iron, carbon, alloyed and high alloyed steel in the control of raw materials

RDM 929-05-93: Certificate for the method of measuring the mass fraction of manganese in alloyed steels under the control of raw materials

RDM 929-06-93: Certificate for the method of measuring the mass fraction of manganese in alloyed steels under the control of raw materials

RDM 929-08-93: The certificate on the method of measurement of the chromium mass fraction by the titrimetric method in alloyed and high-alloyed steel not containing vanadium

RDM 929-09-93: The certificate on a technique of performance of measurements of a mass fraction of chrome a titrimetric method in the alloyed and high-alloyed steel

RDM 929-11-93: Certificate for the method of measuring the mass fraction of silicon in unalloyed iron and carbon steel in the control of raw materials

RDM 929-12-93: Certificate for the method of measuring the mass fraction of silicon in alloyed, high-alloy steel in the control of raw materials

RDM 929-14-93: Certificate for the method of measuring the mass fraction of titanium in alloyed, high-alloyed steel when controlling starting materials

RDM 929-15-93: Certificate for the method of measuring the mass fraction of copper in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-16-93: Certificate for the method of measuring the mass fraction of zirconium in steel, alloyed and high-alloyed in the control of raw materials and finished products

RDM 929-17-93: The certificate on the method of measuring the mass fraction of molybdenum in alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-18-93: Certificate for the measurement of the mass fraction of vanadium in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-19-93: The certificate on the method of measuring the mass fraction of aluminum in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-20-93: Certificate for the method of measuring the mass fraction of tungsten in alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-21-93: The certificate on the method of measuring the mass fraction of niobium in alloyed and high alloyed steels under the control of raw materials and finished products

RDM 929-23-93: The certificate on the method of measuring the mass fraction of carbon by coulometric method in carbon alloyed and high-alloy steel

ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements

TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions

TU 14-3R-110-2009: Thick-walled hot-deformed pipes made of corrosion-resistant steel. Technical conditions

TU 14-3R-115-2010: Centrifugally cast pipes for the chemical and petrochemical industries. Technical conditions

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 2787-2019: Ferrous metals are secondary. General specifications

GOST 34636-2020: Pipe billet. General specifications

GOST 8733-87: Steel seamless cold-deformed and heat-deformed pipes. Technical specifications

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

GOST 977-88: Steel castings. General specifications

GOST R 58389-2019: Bent steel sheet profiles with trapezoidal corrugations for steel-reinforced concrete structures. Technical specifications

GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications

M 15-2019: Recommendation. General requirements for analysis methods

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Hot-rolled sheet. Range
Language: English
Price: $72.27
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Steel structures
Language: English
Price: $297.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16
Metal products from structural alloy steel. Specification
Language: English
Price: $371.25
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!