GOST 5916-70
ГОСТ 5916-70
|
|
Hexagon lock nuts (standard precision). Construction and dimensions
Гайки шестигранные низкие класса точности В. Конструкция и размеры
Status: Not effective - Canceled in the Russian Federation. Discontinued use on the territory of the Russian Federation completely. Information about registration 946-st dated 07/21/2015 (the official website of Rosstandart); (IUS 2-2016)
The standard applies to hexagonal low nuts of accuracy class B with a thread diameter of 1 to 48 mm.
Стандарт распространяется на шестигранные низкие гайки класса точности В с диаметром резьбы от 1 до 48 мм.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Committee of Standards, Measures and Measuring Instruments under the Council of Ministers of the USSR,
2/18/1970
SKU: RUSS52971
National keywords: гайки;
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
21 Mechanical systems and general purpose devices »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.20 Nuts »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.20 Nuts »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G3 Fasteners for general engineering applications »
G33 Nuts »
National Standards for OKSTU »
METAL PRODUCTS FOR INDUSTRIAL PURPOSE (HARDWARE) »
Loose nuts »
As a Replacement Of:
GOST 5916-62: Thin hex nuts (normal accuracy). Dimensions
The Document References:
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 1759.1-82: Bolts, screws, studs and nuts. Tolerance, monitoring methods of dimensions and deviations of shape and surface orientation
GOST 1759.3-83: Nuts. Surface defects and methods of control
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST R 52627-2006: Bolts, screws and studs. Mechanical properties and test methods
GOST R 52628-2006: Nuts. Mechanical properties and test methods
The Document is Referenced By:
808-2017 PKB CV: Instructions for the maintenance of wagons in operation (Instructions for the inspector of wagons)
GOST 12586.1-83: Reinforced-concrete hydraulically forged pressure culverts. Design.
GOST 14225-83: Wooden cases
GOST 14751-69: Cover handles for plain incomplete plug-gauges. Design and dimensions
GOST 16549-2019: Cast iron plug-through cranes, coupling cast iron, for nominal pressure PN? 1.0 MPa (10 kgf / cm2) with a plug for draining water
GOST 16549-71: Sleeve type iron plug valves with gland and blind flange for drainage for Py <= 10 kgf/sq.cm
GOST 16561-76: Metal accessories for wood containers. Specifications
GOST 17201-71: Gripping collets for cutting tools with cylindrical shank. Design
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 18369-73: Cover handles for snap gauges. Design and dimensions
GOST 19826-74: Chain pipe tongs
GOST 20920-75: Valve heads for sanitary ware and laboratory bilge valves. Types and basic dimensions
GOST 20925-75: Units of changeable press-moulds with low positioned loading chamber for moulding thermoset articles. Construction and dimensions
GOST 20926-75: Unit for changeable compression moulding thermoset articles press-moulds. Construction and dimensions
GOST 21295-75: Adjustable ejectors for heated core boxes. Design and dimensions
GOST 21301-75: Guide joining with clamp for heated core boxes. Design and dimensions
GOST 22188-83: Cylindrical helical spring buffers for sheet stamping dies. Design and dimensions
GOST 22189-83: Cylindrical helical spring buffers with body-size hole for sheet stamping dies. Design and dimensions
GOST 22191-83: Rubber spring buffers for sheet stamping dies. Design and dimensions
GOST 22192-83: Polyurethane compression spring buffers for sheet stamping dies. Design and dimensions
GOST 22193-83: Polyurethane spring buffers with body size hole for sheet stamping dies. Design and dimensions
GOST 22199-83: Buffer holders for sheet stamping dies. Design and dimensions
GOST 22200-83: Buffer holders with body size hole for sheet stamping dies. Design and dimensions
GOST 22916-78: Reducers planetary gear-type two-stage sizes Pz2-31,5 - Pz2-63. Basic parameters and dimensions
GOST 22919-78: Reducers planetary gearless single-stage of sizes Pz-31,5 - Pz-63. Basic parameters and dimensions
GOST 23106-78: Longitudinal screw cap couplings. Basic parameters. Design and dimensions
GOST 24584-81: Doors of aluminium for public buildings. Types, constructions and dimensions
GOST 26394-84: Tools for cold upset automatic machines. Hard alloy insert cutters for cutting off bolt blanks with shank length up to five diameters. Construction and dimensions
GOST 31.1066.02-85: Attachments for metall-cutting machine tools. Mandrels with split collets for precision machining. Basic parameters and dimensions
GOST 6482-88: Reinforced concrete non-pressure pipes
GOST 7210-75: Hand-held metal-cutting shears
GOST 9690-71: Lanyard stoppers
OST 108.275.29-80: Single-yoke sliding bearings for thermal and nuclear power plants pipelines. Design and dimensions.
OST 108.275.30-80: Double-yoke Slide bearings for pipelines thermal and nuclear power plants. Design and dimensions.
OST 108.275.38-80: Double-yoke support for thermal and nuclear power plants piping. Design and dimensions.
OST 108.275.52-80: Loop units for pipe hangers of CHP plant and nuclear thermal power plant. Design and dimensions.
OST 108.275.53-80: Loop units for pipe hangers of nuclear thermal power plant. Design and dimensions.
OST 108.275.57-80: Loop units for pipe hangers of nuclear thermal power plant. Design and dimensions.
OST 108.275.60-80: Supporting spring units for pipe hangers of CHP plant and nuclear thermal power plant. Design and dimensions.
OST 108.275.63-80: Loop units with cross head for pipe hangers of CHP plant and nuclear thermal power plant. Design and dimensions.
OST 108.275.64-80: Loop units with cross head for pipe hangers of CHP plant and nuclear thermal power plant. Design and dimensions.
OST 108.275.65-80: Loop units with cross head for pipe hangers of CHP plant and nuclear thermal power plant. Design and dimensions.
OST 24.125.116-01: CHP and NTPP pipeline suspensions. Clamp units with cross-bar. Design and dimensions.
OST 24.125.118-01: CHP and NTPP pipeline suspensions. Clamp suspensions on support beam with lugs. Design and dimensions.
OST 24.125.122-01: CHP and NTPP pipeline suspensions. Spring clamp suspensions on support beam. Design and dimensions.
OST 24.125.151-01: Fixed support for thermal and nuclear power plants piping. Design and dimensions.
OST 24.125.154-01: Slide bearings for pipelines thermal and nuclear power plants. Design and dimensions.
OST 26-01-66-86: cap trays for steel columns. Parameters, design and dimensions.
OST 26-1111-74: Plates TSK-RC, TSK-RB for column apparatus. Parameters, design and dimensions
OST 26-705-79: Plates ТСН ТСН-2 and-3 of columns. Design and dimensions.
OST 26-805-73: Perforated plates of column apparatus. Type and parameters. Design and dimensions.
RD 153-34.0-45.510-98: Model Guidelines for Operation and Repair of Slip Rings and Brushes of Turbine Generators with Power of 63 MW and Above
VSN 164-82: Design and Installation Guidelines to Busways-to-Busway Contact Connections and Connections of Busways to Utilization Equipment Leads
VSN 362-87: Disinfections and Etching of Pipelines
VSN 464-85: General Specified Quantity Allowances for Building Materials. Compendium 20: Installation of Industrial Ventilating Systems
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.