Portland cements, white. Specification
Портландцементы белые. Технические условия
Status: Effective
The standard applies to white portland cements of general construction, made on the basis of white portland cement clinker. The standard does not apply to white portland cement for the production of asbestos cement products.
Стандарт распространяется на белые портландцементы общестроительного назначения, изготовленные на основе белого портландцементного клинкера. Стандарт не распространяется на белый портландцемент для производства асбестоцементных изделий.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
12/29/1988
SKU: RUSS53194
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.61 Mineral binders »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.10 Cement. Gypsum. Lime. Building mixture »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.10 Cement. Gypsum. Lime. Building mixture »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh12 Cementing materials »
National Standards for OKSTU »
CONSTRUCTION MATERIALS, EXCEPT REFINED CONCRETE STRUCTURES AND PARTS »
Portland decorative cement »
As a Replacement Of:
GOST 965-78: Portland cement, white. Specification
The Document References:
GOST 30515-97: Cements General specifications
GOST 310.1-76: Cements. Test methods
GOST 310.2-76: Cements. Methods of grinding fineness determination
GOST 310.3-76: Cements. Methods of tests consistency, times of settining and of soundness
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 4013-82: Gypsum and gypsum-anhydrite rock for the manufacture of binders. Specifications
GOST 5382-91: Cements and materials for cement production. Chemical analysis methods
GOST 6613-86: Square meshed woven wire gauzes
ST SEV 4772-84: Cements. Terms and Definitions
The Document is Referenced By:
GOST 13578-68: Lightweight concrete panels on porous aggregates for external walls of industrial buildings. Technical requirements
GOST 15825-80: Coloured Portland cement. Specifications
GOST 17608-2017: The concrete paving slabs. Specifications
GOST 17608-91: Footway concrete slabs. Specifications
GOST 19279-73: Polymer-cement paints
GOST 24099-2013: Decorative facing slabs on basis of natural stone. Specifications
GOST 24099-80: Decorative facing slabs of crushed natural stone. Specifications
GOST 24594-81: Wall panels and blocks of brick and ceramic stones. General specifications
GOST 24640-91: Additions for cements. Classification
GOST 30744-2001: Cements. Methods of testing with using polyfraction standard sand
GOST 31357-2007: Dry bulding cement binder mixes. General specifications
GOST 33126-2014: Expanded clay concrete blocs. Specifications
GOST 6133-2019: Concrete wall stones. Technical conditions
GOST 6133-99: Concrete wall stone. Specifications
GOST 6786-80: Reinforced concrete parapet slabs for production buildings. Specifications
GOST R 54358-2011: Dry cement base decorative coats for facade’s thermal insulation composite systems with external mortar’s lays. Specifications
GOST R 54358-2017: Dry cement base decorative coats for faзade’s thermo insulation composite systems with external plaster lays. Specifications
GOST R 54359-2011: Dry cement base adhesives, base coats and patching putties for facade’s thermo insulation composite systems with external mortar’s lays. Specifications
GOST R 54359-2017: Dry cement base decorative coats for faзade’s thermo insulation composite systems with external plaster lays. Specifications
GOST R 56506-2015: Coarse-pored claydite-concrete heat insulating tiles. Specifications
GOST R 56585-2015: Pigments for concretes and mortars. General Specifications
GOST R 56686-2015: Dry construction plaster mixes based on cement binder with use of ceramsite sand. Specifications
GOST R 57796-2017: Dry building mixes on cement binder with use of ceramsite sand for mortars. Specifications
MDS 12-24.2006: Installation of ordinary, decorative and waterproofing plaster coatings of building facades
RD 31.55.08.01-89: Iron casting. Materials charge and auxiliary. Consumption rates
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
SN 277-80: Guidelines for the Fabrication of Cellular Concrete Products
SN 483-76: Instructions for the manufacture of structures and products from concrete, prepared on porous aggregates
SN 549-82: Guidelines for the Design, Fabrication, and Application of Structures and Products Made of Organic Fiber Reinforced Concrete (Arbolite)
SNiP 3.09.01-85: Precast reinforced concrete structure and work-piece production
SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 82-101-98: Preparation and use of masonry mortars. To replace SN 290-74. Letter № AB-20-218 / 12 dated 06.17.98.
TR 127-01: Technical recommendations on repair and restoration works of roads, sidewalks, platforms for various purposes with the complex improvement of courtyards
TR 137-03: Technical recommendations on the use of dry specialized finishing mixtures for exterior and interior work in the construction of new buildings and structures, reconstruction and repair
TR 140-03: Technical recommendations on the technology of painting the interiors and facades of residential and public buildings under construction
TR 149-03: Technical recommendations on the technology of using the complex of specialized finishing materials for the renovation of external and internal surfaces during reconstruction and major repairs of buildings
TR 97-99: Guide to Good Practice for Comprehensive Site Improvements and Amenities for Residential Complexes
TU 5741-004-18576628-99: Stones concrete wall
VSN 61-97: Process Guidelines for Construction of Decorative Concrete Road Pavements
VSN 66-89-76: Guidelines to Exterior Finishes for Exterior Wall Panels
VSN 9-94: Flooring Guidelines for Residential and Public Buildings
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
