imgalt

GOST 10446-80

ГОСТ 10446-80

Wire. Tensile test method

Проволока. Метод испытания на растяжение

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)

The standard establishes a method of testing for static stretching at a temperature of 20 (plus 15, minus 10) ° C wires made of metals and their alloys with a diameter or maximum cross-sectional size not exceeding 16 mm round, square, as well as rectangular section and special profile ratio of width to thickness of not more than 4 with a constant cross-section, and the wire of a periodic profile.

Стандарт устанавливает метод испытания на статическое растяжение при температуре при температуре 20 (плюс 15, минус 10) °С проволоки из металлов и их сплавов диаметром или максимальным размером поперечного сечения, не превышающим 16 мм круглого, квадратного, а также прямоугольного сечения и специального профиля с отношением ширины к толщине не более 4 с постоянным поперечным сечением, и проволоки периодического профиля.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 6/3/1980

SKU: RUSS53308

Price: $84.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 004/2011 TR CU. About safety of low voltage equipment » Regulations and standards (to TR CU 004/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.2 Testing of manufacturing products »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.040 Metal Testing » 77.040.10 Mechanical testing of metals »

National standards » 77 METALLURGY » 77.040 Metal Testing » 77.040.10 Mechanical testing of metals »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.65 Steel wire, wire ropes and link chains »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.65 Steel wire, wire ropes and link chains »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V7 Wire and Wire Products » V79 Test methods. Packaging. Marking »

National Standards for OKSTU » METAL PRODUCTS FOR INDUSTRIAL PURPOSE (HARDWARE) » Control methods (testing, analysis, measurements) »


As a Replacement Of:

GOST 10446-63: Wire. Tension test method

The Document References:

GOST 1497-84: Metals. Methods of tension test

The Document is Referenced By:

GOST 10155-2016: Manganin uninsulated wire. Specification

GOST 10155-75: Manganin uninsulated wire

GOST 1049-2015: Manganese nickel wire. Specifications

GOST 1049-74: Manganese nickel wire

GOST 10505-76: Locked-coil hoisting steel wire ropes

GOST 1066-2015: Brass wire. Specifications

GOST 1066-90: Brass wire

GOST 1071-81: Heat treated steel spring wire

GOST 10821-2007: Wire made of platinum and platinum-rhodium alloys for thermoelectric temperature transducers. Specifications

GOST 10821-75: Wire made of platinum and platinum-rhodium alloys for thermoelectric thermometers

GOST 11850-72: Steel wire for spring washers

GOST 12766.1-90: High electrical resistant wire made of precision alloys

GOST 12766.3-90: Precision gauged alloys of high electric resistance

GOST 12766.4-90: Graded rolled stock of precision alloys of high electrical resistance

GOST 12920-2013: Brass wire for cold upsetting

GOST 12920-67: Brass wire for cold upsetting. Specifications

GOST 14081-78: Wire of precision alloys with specified temperature coefficient of linear expansion. Specifications

GOST 14118-85: Wire made of precision alloys, designed for elastic elements

GOST 14340.9-69: Enameled round winding wires. Method of the elongation test

GOST 14963-78: Doped steel spring wire

GOST 1526-81: Steel zinc-coated wire for electrical lead and cable armoring

GOST 15598-70: Piano steel wire

GOST 15634.1-70: Magnet wire. Method of the elongation test

GOST 15834-2016: Beryllium bronze wire. Specification

GOST 15834-77: Wire from beryllium bronze

GOST 15892-70: Steel zinc-coated bind wire for aerial communication lines

GOST 16130-90: Welding wire and rods of copper and copper alloys. Specifications

GOST 16135-70: Steel wire for calculating devices

GOST 1668-73: Steel zinc-coated wire for aerial lines

GOST 17305-71: Wire of carbon construction steel. Specification

GOST 17305-91: Wire of carbon construction steel

GOST 1790-2016: Wire made of chromel alloy T, alumel, copes and constantan for thermoelectrodes of thermoelectric converters. Specification

GOST 1790-77: Wire made of chrome, aluminum, copper and constantan alloys for thermo electrodes of thermo-electric converters

GOST 1791-2014: Wire of nickel and copper-nickel alloys for extending wires for the thermoelectric converters. Specifications.

GOST 1791-67: Wire from nickel and copper-nickel alloys for extension leads to the thermoelectric transducers.

GOST 18143-72: Corrosion resistant

GOST 18834-83: Magnetic wire for recording harmonic signals

GOST 18899-73: Steel wire ropes. Locked conveying wire ropes. Specifications

GOST 18907-73: Hard-worked heat-treated ground bars from high-alloy and corrosion-resistant steel

GOST 19703-79: Leaded brass wire type LS 63-3 specifications

GOST 19804.2-79: Prestressed reinforced-concrete driven square piles. Structure and dimensions

GOST 19804.3-80: Reinforced concrete driven piles of square cross-section with inner round cave. Construction and dimensions

GOST 2112-79: Electromechanical round copper wire. Specification

GOST 2179-2015: Nickel and siliceous nickel wire. Specifications

GOST 2179-75: Nickel and silicon nickel wire

GOST 2246-70: Welding steel wire. Specifications

GOST 22498-88: Local telephone cables with polyethylene insulation and plastic sheath.

GOST 22666-2016: Copper wire and kopel alloy wire for low-temperature thermoelectrical transducers. Specifications

GOST 22666-77: Copper and copel alloy wire for low-temperature thermocouples

GOST 2584-86: Copper and copper alloys trolley wires

GOST 26366-84: Brass-plated steel wire for base rings of tires

GOST 26469-85: Palladium-tungsten alloy wire

GOST 26615-85: Enameled winding wires

GOST 27265-87: Titanium and titanium-alloy filling wire

GOST 285-69: Monobasic corrugated barbed wire

GOST 3110-74: Steel spoke wire

GOST 31622-2012: Wrought stainless steel for surgical implants. Specifications

GOST 31624-2012: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications

GOST 31625-2012: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments

GOST 31943-2012: Telephone cables with polyethylene insulation and plastic sheath. Specifications

GOST 31946-2012: Insulated and protected wires for overhead power lines. General specifications

GOST 31995-2012: Polyethylene insulated and plastic sheathed block-signalling cables. Specifications

GOST 3241-91: Steel ropes

GOST 3282-74: General-purpose low-carbon steel wire. Specifications

GOST 3822-79: Bimetallic steel-copper wire

GOST 3875-83: Steel card wire

GOST 3920-70: Tinned steel cable wire

GOST 434-78: Wire with rectangular cross-section and copper busbar wire for electrotechnical purposes

GOST 4727-83: Bearing wire

GOST 4752-2012: Cylinder copper wire. Specifications

GOST 4752-79: Copper cylinder wire

GOST 4775-91: Bare, bimetallic, steel-copper wires

GOST 5220-2018: Germen silver wire. Specifications

GOST 5220-78: Nickel silver wire

GOST 5221-2008: Tin-zink bronze wire. Specifications

GOST 5221-77: Tin-zinc bronze wire

GOST 5222-2016: Silicon-manganese bronze wire. Specifications

GOST 5222-72: Silicon-manganese bronze wire

GOST 5307-2015: Constantan uninsulated wire. Specifications

GOST 5307-77: Constantan noninsulated wire

GOST 5437-85: Reed wire

GOST 5468-88: Needle wire

GOST 5529-75: Round brass wire for foot-wear industry

GOST 5663-79: Carbon steel wire for cold upsetting

GOST 6436-75: PE-insulated plastic-sheathed block-signalling cables. Specifications

GOST 7372-79: Steel wire for ropes

GOST 7480-73: Polygraphic wire

GOST 7871-2019: Welding wire of aluminum and aluminum alloys. Technical specifications

GOST 7871-75: Aluminum and aluminium alloy welding wire

GOST 792-67: Quality low-carbon wire

GOST 839-2019: Uninsulated wires for overhead power lines. Technical specifications

GOST 8803-89: Round finer wire made of precision alloys with high electrical resistivity for resistive elements

GOST 9124-85: Binding tin-coated steel wire

GOST 9161-85: Harness wire

GOST 9389-75: Carbon steel spring wire

GOST 9850-72: Zinc-coated steel core wire

GOST R 50.04.06-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for new material (base or welding)

GOST R 50566-93: Steel wire for mechanical springs. General requirements

GOST R 51285-99: Twisted wire meshes with hexagonal cells for gabion constructions. Specifications

GOST R 51311-99: Telephone cables with polyethylene insulation and plastic sheath. Specifications

GOST R 51312-99: Polyethylene insulated and plastic sheathed block-signalling cables. Specifications

GOST R 51394-99: Wrought stainless steel for surgical implants. Specifications

GOST R 51396-99: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications

GOST R 51397-99: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

GOST R 52203-2004: Tubing and coupling. Specifications

GOST R 52373-2005: Insulated and protected wires for overhead power lines. General specifications

GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications

GOST R 53405-2009: Copper cylinder wire. Specifications

GOST R 53439-2009: Brass wire for cold upsetting. Specifications

GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments

GOST R 53880-2010: Coaxial cables for cable television networks. General specifications

GOST R 54150-2010: Wire from БрКМц3-1 bronze. Specifications

GOST R 54429-2011: Symmetrical telecommunication cables for digital communication. General specification

GOST R 55647-2013: Copper and copper alloys trolley wires for electric railways. Specifications

GOST R 56292-2014: Block-signalling cables. General specification

GOST R 56830-2015: Petroleum and natural gas industries. Electrical submersible pump units. General technical requirements

GOST R 57517-2017: General-purpose aluminium and aluminium alloys drawn wire. Specifications

GOST R 57910-2017: Materials for additive process. Control and tests methods

GOST R 58416-2019: Cables are radio frequency. General specifications

GOST R 70042-2022: Symmetrical communication cables for broadband access networks. General technical specifications

GOST R 70043-2022: Telephone cables with polyethylene insulation in a plastic sheath. General specifications

GOST R ISO 15841-2017: Dentistry. Wires for use in orthodontics

GOST R ISO 5832-1-2010: Implants for surgery. Metallic materials. Part 1. Wrought stainless steel

GOST R ISO 5832-4-2011: Implants for surgery. Metallic materials. Part 4. Cobalt-chromium-molybdenum casting alloy

GOST R ISO 5832-5-2010: Implants for surgery. Metallic materials. Part 5. Wrought cobalt-nickel-chromium-tungsten-nickel alloy

GOST R ISO 5832-6-2010: Implants for surgery. Metallic materials Part 6. Wrought cobalt-nickel-chromium-molybdenum alloy

GOST R ISO 5832-7-2009: Implants for surgery. Metallic materials. Part 7. Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy

GOST R ISO 5832-8-2010: Implants for surgery. Metallic materials. Part 8. Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy

GOST R ISO 5832-9-2009: Implants for surgery. Metallic materials. Part 9. Wrought high nitrogen stainless steel

GOST R ISO 5838-1-2011: Implants for surgery. Spokes, skeletal pins and wires. Part 1. Material and mechanical requirements

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

P 69-97/VNIIG: Guidance on methods for assessing the life and safety of concrete and reinforced concrete structures of hydraulic structures

RD 15-12-2007: Methodical instructions on the procedure for testing steel ropes at cable test stations

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures

RTM 17-02-2003: Guiding technical materials on the design and manufacture of steel-fiber-concrete structures on fiber, cut from sheet

RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber

RTM 5-05-2009: Guiding technical materials for the design, manufacture and use of steel fiber concrete structures on the fiber of thin steel wire

SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel

ST RK 2339-2013: Plastic insulated small-paired telephone cables. Specification

ST RK 2341-2013: Stationary cross wire with insulation from vinyl blend. Specification

ST RK 2794-2015: Wires are self-supporting, insulated and protected for overhead power lines. Technical conditions

ST TsKBA 007-2004: Pipe fittings. Organizing and conducting an industrial safety review of pipeline valves operated at hazardous production facilities

ST TsKBA 051-2008: Pipe fittings. Castings from non-ferrous alloys. Technical requirements

TU 0991-123-53832025-2001: Steel fiber for dispersed concrete reinforcement

TU 0991-125-46854090-2001: Milled steel fiber for concrete reinforcement

TU 1211-205-46854090-2005: Steel wire fiber for concrete reinforcement

TU 1221-002-95751815-2009: Fiber from thin steel wire. Technical conditions

TU 14-4-1431-87: AP-AN4 Activated Welding Wire. Technical conditions

TU 16.K71-087-90: Round electrotechnical copper wire. Technical conditions

TU 16-705.492-2005: Round electrotechnical copper wire. Technical conditions

TU 3-1002-77: Corrosion-resistant high-strength spring wire

TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English
Price: $634.00
imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English
Price: $139.00
imgalt
Ice cream. General technical requirements
Language: English
Price: $162.60
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!