imgalt

GOST 22082-76

ГОСТ 22082-76

Injection mould bases, detail-blanks and details of injection moulds. Specifications

Пресс-формы-заготовки, детали-заготовки и детали пресс-форм для литья термопластов п��д давлением. Технические условия

Status: Effective. The limitation of effectiveness has been lifted: Resolution of the State Standard No. 2188 dated 05/28/82

The standard applies to molds, blanks, workpieces and parts of molds for molding thermoplastics under pressure according to GOST 22062-76 - GOST 22081-76

Стандарт распространяется на пресс-формы-заготовки, детали-заготовки и детали пресс-форм для литья термопластов под давлением по ГОСТ 22062-76 - ГОСТ 22081-76

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 8/25/1976

SKU: RUSS53335

Price: $118.00



imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.2 Machines and equipment for special purposes » 4.13.2.8 Machinery and equipment for processing of polymeric materials »

ISO classifier » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.200 Equipment for production of rubber and plastics »

National standards » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.200 Equipment for production of rubber and plastics »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G2 Industrial tools and accessories » G21 Tools and devices for hot processing »

National Standards for OKSTU » TOOL, TECHNOLOGICAL TOOLING, ABRASIVE MATERIALS » Stamps and molds »


The Document References:

GOST 10198-78: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 10905-86: Surface plates and face-plates. Specifications

GOST 11098-75: Gauge callipers with reading arrangement. Specifications

GOST 14192-77: Marking of cargoes

GOST 166-80: Vernier callipers. Specifications

GOST 22062-76: Injection mould bases with ejector plate. Design and dimensions

GOST 22063-76: Injection mould bases with take-off plate. Design and dimensions

GOST 22064-76: Injection mould bases with take-off and ejector plate. Design and dimensions

GOST 22065-76: Plate-blanks of injection moulds. Design and dimensions

GOST 22066-76: Clamping plate-blanks of injection moulds. Design and dimensions

GOST 22067-76: Cross-forming ejector plate-blanks of injection moulds. Design and dimensions

GOST 22068-76: Rectangular ejector plate-blanks of injection moulds. Design and dimensions

GOST 22069-76: Cross-forming supporting plate-blanks of injection moulds. Design and dimensions

GOST 22070-76: Rectangular supporting plate-blanks of injection moulds. Design and dimensions

GOST 22071-76: Struts of injection moulds. Design and dimensions

GOST 22072-76: Guide pins of injection moulds. Design and dimensions

GOST 22073-76: Guide bushings of injection moulds. Design and dimensions

GOST 22074-76: Short guide bushings of injection moulds. Design and dimensions

GOST 22075-76: Locating bushings of injection moulds. Design and dimensions

GOST 22076-76: Supporting disks of injection moulds. Design and dimensions

GOST 22077-76: Spring bushings of injection moulds. Design and dimensions

GOST 22078-76: Central bushings of injection moulds. Design and dimensions

GOST 22079-76: Shanks of injection moulds. Design and dimensions

GOST 22080-76: Shouldered shanks of injection moulds. Design and dimensions

GOST 22081-76: Flange-blanks of injection moulds. Design and dimensions

GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 3749-77: Checking 90° squares. Specifications

GOST 519-77: Thread gauges. Specification

GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications

GOST 7661-67: Dial depth gauges. Specifications

GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm

GOST 8026-75: Levelling rules. Types. The main parameters. Technical requirements

GOST 868-82: Internal dial gauges graduated in 0,01 mm. Specifications

GOST 882-75: Probes. Specification

GOST 8908-81: Basic norms of interchangeability. Standard angles and angle tolerances

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 9378-75: Surface roughness comparison specimens. Technical requirements

GOST 9696-82: Multi-revolution dial indicators graduated in 0,001 and 0,002 mm. Types. Basic parameters. Specifications

The Document is Referenced By:

GOST 22062-76: Injection mould bases with ejector plate. Design and dimensions

GOST 22063-76: Injection mould bases with take-off plate. Design and dimensions

GOST 22064-76: Injection mould bases with take-off and ejector plate. Design and dimensions

GOST 22065-76: Plate-blanks of injection moulds. Design and dimensions

GOST 22066-76: Clamping plate-blanks of injection moulds. Design and dimensions

GOST 22067-76: Cross-forming ejector plate-blanks of injection moulds. Design and dimensions

GOST 22068-76: Rectangular ejector plate-blanks of injection moulds. Design and dimensions

GOST 22069-76: Cross-forming supporting plate-blanks of injection moulds. Design and dimensions

GOST 22070-76: Rectangular supporting plate-blanks of injection moulds. Design and dimensions

GOST 22071-76: Struts of injection moulds. Design and dimensions

GOST 22072-76: Guide pins of injection moulds. Design and dimensions

GOST 22073-76: Guide bushings of injection moulds. Design and dimensions

GOST 22074-76: Short guide bushings of injection moulds. Design and dimensions

GOST 22075-76: Locating bushings of injection moulds. Design and dimensions

GOST 22076-76: Supporting disks of injection moulds. Design and dimensions

GOST 22077-76: Spring bushings of injection moulds. Design and dimensions

GOST 22078-76: Central bushings of injection moulds. Design and dimensions

GOST 22079-76: Shanks of injection moulds. Design and dimensions

GOST 22080-76: Shouldered shanks of injection moulds. Design and dimensions

GOST 22081-76: Flange-blanks of injection moulds. Design and dimensions

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Tight and slack wooden barrels
Language: English
Price: $349.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Construction in seismic regions
Language: English
Price: $553.00
imgalt
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English
Price: $1,851.79
imgalt
Software for measuring instruments. Procedure for of certification. General provisions
Language: English
Price: $356.86
imgalt
Current transformers. General specifications
Language: English
Price: $715.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!