GOST 5927-70
ГОСТ 5927-70
|
|
Hexagon nuts (high precision). Construction and dimensions
Гайки шестигранные класса точности А. Конструкция и размеры
Status: Not effective - Canceled in the Russian Federation. Discontinued use on the territory of the Russian Federation completely. Information about registration 945-st dated July 21, 2015 (the official website of Rosstandart); IUS 1-2017
The standard applies to hexagon nuts of accuracy class A with a thread diameter of 1 to 48 mm.
Стандарт распространяется на шестигранные гайки класса точности А с диаметром резьбы от 1 до 48 мм.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Committee of Standards, Measures and Measuring Instruments under the Council of Ministers of the USSR,
2/18/1970
SKU: RUSS53344
National keywords: гайки;
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
21 Mechanical systems and general purpose devices »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.20 Nuts »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.20 Nuts »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G3 Fasteners for general engineering applications »
G33 Nuts »
National Standards for OKSTU »
METAL PRODUCTS FOR INDUSTRIAL PURPOSE (HARDWARE) »
Loose nuts »
As a Replacement Of:
GOST 5927-62: Hex nuts (increased accuracy). Dimensions
The Document References:
GOST 16093-70: Metric thread for diameters from 1 up to 600 mm. Tolerances
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 1759.1-82: Bolts, screws, studs and nuts. Tolerance, monitoring methods of dimensions and deviations of shape and surface orientation
GOST 1759.3-83: Nuts. Surface defects and methods of control
GOST 1759.5-87: Nuts. Mechanical properties and test methods
GOST 1759-70: Bolts, screws, pins and nuts
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST R 52627-2006: Bolts, screws and studs. Mechanical properties and test methods
GOST R 52628-2006: Nuts. Mechanical properties and test methods
The Document is Referenced By:
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 12586.1-83: Reinforced-concrete hydraulically forged pressure culverts. Design.
GOST 13153-67: Wedge clamps. Design and dimensions
GOST 18746-80: Backing dowel pins. Design and dimensions
GOST 19535-74: Flange joints for hydraulic and lubricating systems. Specifications
GOST 20.57.406-81: Electrical equipment, devices for electronic technology and quantum electronics
GOST 20084-74: Iron pattern plates for moulding boxes having inside dimensions 400 x 300 mm, 450 x 350 mm, 500 x 400 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions
GOST 20085-74: Iron pattern plates with changeable metal inserts for moulding boxes having inside dimensions 400x300 mm, 450x350 mm, 500x400 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions
GOST 20086-74: Iron pattern plates for moulding boxes having inside dimensions 1000x600 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions
GOST 20087-74: Iron pattern plates for moulding boxes having inside dimensions 1200x1000 mm for moulding foundry machines without turn of half mould without squeezing. Design and dimensions
GOST 20089-74: Iron pattern plates with changeable metal inserts for moulding boxes having inside dimensions 600x500 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions
GOST 20091-74: Iron pattern plates with changeable metal inserts for moulding boxes having inside dimensions 800x700 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions
GOST 20093-74: Iron pattern plates with changeable metal inserts for moulding boxes having inside dimensions 1000x800 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions
GOST 20094-74: Iron pattern plates for moulding boxes having inside dimensions 600x500 mm, 800x700 mm, 1000x800 mm, for moulding foundry machines with turn of half mould with squeezing. Design and dimensions
GOST 20095-74: Iron pattern plates with changeable metal inserts for moulding boxes having inside dimensions 600x500 mm, 800x700 mm, 1000x800 mm moulding foundry machines with turn of half mould with squeezing. Design and dimensions
GOST 20096-74: Iron pattern plates for moulding boxes having inside dimensions 800x700 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions
GOST 20097-74: Iron pattern plates with changeable metal inserts for moulding boxes having inside dimensions 800x700 mm for moulding foundry machines with turn of half mould with squeezing. Design and dimensions
GOST 20098-74: Iron pattern plates for moulding boxes having inside dimensions 1000x800 mm for moulding foundry machines with turn of half mould with squeezing. Design and dimensions
GOST 20099-74: Iron pattern plates with changeable metal inserts for moulding boxes having inside dimensions 1000x800 mm for moulding foundry machines with turn of half mould with squeezing. Design and dimensions
GOST 20100-74: Iron pattern plates for moulding boxes having inside dimensions 1200x1000 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions
GOST 20101-74: Steel pattern plates for moulding boxes having inside dimensions 400x300 mm, 450x350 mm, 500x400 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions
GOST 20102-74: Steel pattern plates with changeable metal inserts for moulding boxes having inside dimensions 400x300 mm, 450x350 mm, 500x400 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions
GOST 20103-74: Steel pattern plates for moulding boxes having inside dimensions 1000x600 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions
GOST 20104-74: Steel pattern plates for moulding boxes having inside dimensions 1200x1000 mm for moulding foundry machines without turn of half mould without squeezing. Design and dimensions
GOST 20106-74: Steel pattern plates with changeable metal inserts for moulding boxes having inside dimensions 600x500 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions
GOST 20108-74: Steel pattern plates with changeable metal inserts for moulding boxes having inside dimensions 800x700 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions
GOST 20110-74: Steel pattern plates with changeable metal insets for moulding boxes having inside dimensions 1000x800 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions
GOST 20111-74: Steel pattern plates moulding boxes having inside dimensions 600х500 mm, 800х700 mm, 1000х800 mm for moulding foundry machines with turn of half mould with squeezing. Design and dimensions
GOST 20112-74: Steel pattern plates with changeable metal inserts for moulding boxes having inside dimensions 600x500 mm, 800x700 mm, 1000x800 mm for moulding foundry machines with turn of half mould with squeezing. Design and dimensions
GOST 20113-74: Steel pattern plates for moulding boxes having inside dimensions 800x700 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions
GOST 20114-74: Steel pattern plates with changeable metal insets for moulding boxes having inside dimensions 800x700 mm for moulding foundry machines with turn of half mould with squeezing. Design and dimensions
GOST 20115-74: Steel pattern plates for moulding boxes having inside dimensions 1000x800 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions
GOST 20116-74: Steel pattern plates with changeable metal inserts for moulding boxes having inside dimensions 1000x800 mm for moulding machines without turn of half mould without squeezing. Design and dimensions
GOST 20117-74: Steel pattern plates for moulding boxes having inside dimensions 1200x1000 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions
GOST 20118-74: Steel pattern plates for moulding boxes having inside dimensions 1600x1200 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions
GOST 20119-74: Steel pattern plates for moulding boxes having inside dimensions 2000x1600 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions
GOST 20121-74: Steel pattern plates for moulding boxes having inside dimensions 2500x2000 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions
GOST 20146-74: Pattern plates with shallow changeable wooden inserts for moulding boxes having inside dimensions 400x300 mm, 450x350 mm, 500x400 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions
GOST 20147-74: Pattern plates with shallow changeable wooden inserts for moulding boxes having inside dimensions 600x500 mm, 800x700 mm for moulding foundry machines with turn of half mould with squeezing. Design and dimensions
GOST 20148-74: Pattern plate with shallow changeable wooden insert for moulding box having inside dimensions 800x700 mm for moulding foundry machines with turn of half mould with squeezing. Design and dimensions
GOST 20149-74: Pattern plate with shallow changeable wooden inserts for moulding box having inside dimensions 800x700 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions
GOST 20150-74: Pattern plate with shallow changeable wooden inserts for moulding box having inside dimensions 600x500 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions
GOST 20155-74: Pattern plates with deep changeable wooden inserts for moulding box having inside dimensions 400x300 mm, 450x350 mm, 500x400 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions
GOST 20156-74: Pattern plates with changeable wooden insert for moulding box having inside dimensions 1000x600 mm for moulding foundry machines without turn of half mould with squeezing. Design and dimensions
GOST 20157-74: Pattern plates with deep changeable wooden inserts for moulding box having inside dimensions 600x500 mm for moulding foundry machines with turn of half mould with squeezing. Design and dimensions
GOST 20158-74: Pattern plates with deep changeable wooden inserts for moulding box having inside dimensions 800x700 mm for moulding foundry machines with turn of half mould with squeezing. Design and dimensions
GOST 20159-74: Pattern plates with changeable wooden inserts for moulding box having inside dimensions 100x800 mm for moulding foundry machines with turn of half mould with squeezing. Design and dimensions
GOST 20160-74: Pattern plates with deep changeable wooden inserts for moulding box having inside dimensions 800x700 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions
GOST 20161-74: Pattern plates with changeable wooden inserts for moulding box having inside dimensions 1000x800 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions
GOST 20162-74: Pattern plates with changeable wooden inserts for moulding box having inside dimensions 1200x1000 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions
GOST 20163-74: Pattern plates with changeable wooden inserts for moulding box having inside dimensions 1600x1200 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions
GOST 20164-74: Pattern plates with changeable wooden inserts for moulding box having inside dimensions 2000x1600 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions
GOST 20165-74: Pattern plates with changeable wooden inserts for moulding box having inside dimensions 2600x1600 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions
GOST 20166-74: Pattern plates with changeable wooden inserts for moulding box having inside dimensions 2500x2000 mm for moulding foundry machines with turn of half mould without squeezing. Design and dimensions
GOST 20341-74: Metal casting patterns. Securing patterns by screws on metal pattern plates. Design and dimensions
GOST 20342-74: Metal casting patterns. Bolting patterns on metal pattern plates. Design and dimensions
GOST 20344-74: Metal casting patterns. Fixing and securing patterns by step screws on metal pattern plates. Design and dimensions
GOST 20345-74: Metal casting patterns. Fixing and securing gating patterns by pins on metal pattern plates. Design and dimensions
GOST 20347-74: Wood casting patterns. Securing patterns on metal pattern plates. Design and dimensions
GOST 20378-74: Bottom boards of aluminium alloys for moulding boxes having inside dimensions: length from 600 mm, width 500 mm. Construction and dimensions
GOST 20379-74: Bottom boards of aluminium alloys for moulding boxes having inside dimensions: length 800 mm, width 700 mm. Construction and dimensions
GOST 21081-75: Aluminium casting patterns. Fixing of loose pieces. Design and dimensions
GOST 21082-75: Metal casting patterns. Securing of built-up patterns. Design and dimensions
GOST 21083-75: Metal casting patterns. Securing of pattern pieces. Design and dimensions
GOST 21084-75: Metal casting patterns. Fixing of risers. Design and dimensions
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 21143-84: Roller-wedge mechanisms for strip feeding, maximum width 125 mm. Basic and coupling dimensions
GOST 21145-84: Tong-gripper mechanisms for strip feeding, maximum width 50 mm. Basic and coupling dimensions
GOST 21147-84: Strip cleaning devices. Basic and coupling dimensions
GOST 21189-75: Prismatic supports for automatic lathe holders. Design and dimensions
GOST 21190-75: Roll supports for automatic turret lathe holders. Design and dimensions
GOST 21201-75: Support holders for skew clamping of turret lathe cutters. Design and dimensions
GOST 21938-76: Chucks for thread cutting on lathes. Design and dimensions
GOST 22474-77: Pins for fixing and securing the patterns on master pattern plates. Design and dimensions
GOST 22475-77: Bolt fixtures for master pattern plates. Design and dimensions
GOST 22742-77: Sets of square connectors fixture of radio electronic items. Specifications
GOST 26230-88: Automatic lines for final forming of nuts. Output range
GOST 26391-84: Ball-wedge mechanisms for wire feeding diameter from 1 to 3 mm. Basic and coupling dimensions
GOST 26505-85: Tools for cold-forming machines. Gutters Construction and dimensions
GOST 26506-85: Tools for cold-forming machines. Dies for cutting ofnut blanks. Construction and dimensions
GOST 26507-85: Tools for cold-forming machines. 1 St station dies. Construction and dimensions
GOST 26508-85: Tools for cold-forming machines. 2Nd station dies. Construction and dimensions
GOST 26509-85: Tools for cold-forming machines. 3rd station dies. Construction and dimensions
GOST 26510-85: Tools for cold-forming machines. 4Th station dies. Construction and dimensions
GOST 26511-85: Tools for cold-forming machines. 5Th station dies. Construction and dimensions
GOST 26512-85: Tools for cold-forming machines. 1St station punches. Construction and dimensions
GOST 26513-85: Tools for cold-forming machines. 2-D station punches. Construction and dimensions
GOST 26514-85: Tools for cold-forming machines. 3rd station punches. Construction and dimensions
GOST 26515-85: Tools for cold-forming machines. 4Th station punches. Construction and dimensions
GOST 26516-85: Tools for cold-forming machines. 5Th station punches. Construction and dimensions
GOST 26804-2012: Metal road safety barriers. Specifications
GOST 30630.1.6-2013: Test methods for resistance to mechanical external influencing factors for machines, instruments and other industrial products. Tests of electrical terminals, fittings and other connecting parts to the impact of bending, torque, tensile and compressive forces
GOST 31.0151.01-90: Universal and special-purpose setters
GOST 31610.0-2012: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements
GOST 31610.0-2014: Explosive atmospheres. Part 0. Equipment. General requirements
GOST 33556-2015: Leaf springs of motor vehicles. Requirements and test methods
GOST 6414-87: Automatic five-position nut cold upsetters. Parameters and dimensions. Norms of accuracy
GOST 6482-88: Reinforced concrete non-pressure pipes
GOST ISO 4759-1-2015: Tolerances for fasteners. Part 1. Иolts, screws, studs and nuts. Product grades A, B and C
GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements
GOST R 51911-2002: Mechanical environment stability test methods for machines, instruments and other industrial products. Bending, torn, tensile and compression tests of electrical terminals, fittings and other parts being connecting up
GOST R 52350.0-2005: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements
GOST R 57892-2017: Spinal assistants and headholders. Тechnical requirements and test methods
GOST R 70461-2022: Construction works and typical technological processes. Steel structures made of pipes and closed profiles. Rules and control of installation work
GOST R 70494-2022: Functionally corrective corsets of modular type. General technical requirements. Classification
GOST R IEC 60079-0-2007: Explosive atmospheres. Part 0. Equipment. General requirements
GOST R IEC 60079-0-2011: Explosive atmospheres. Part 0. Equipment. General requirements
GOST R ISO 16047-2009: Fasteners. Torque/clamp force testing
GOST R ISO 4759-1-2009: Tolerances for fasteners. Part 1: bolts, screws, studs and nuts. Product grades A, B and C
Order 1487-st: On the restoration of interstate standards in the territory of the Russian Federation
OST 26-07-2038-81: Electromagnetic valves. Double-terminal plate. Design and main dimensions. Technical requirements.
OST 26-07-266-70: Fasteners. The types and limitations.
OST 35-22-83: Pipe culverts made of corrugated metal intended for railroad and auto road. Specifications.
OST 36-128-85: mounting Devices and assemblies. Calculation and design Methods.
PI 249-2000: Riveting of metal structures. application
RD 03112194-1099-03: Guidance on organizing and rendering of services and jobs on conversion of vehicles to exploitation of compressed natural gas
RD 200-RSFSR-12-0176-87: Guidelines for the organization and conduct of the conversion of automobile rolling stock for work on liquefied petroleum gas
RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.
RD 39-0147014-348-89: Guidelines for Corrosion Protection of Field Equipment Using Domestically Manufactured Inhibitors
RD 39-3-221-79: Instructions for corrosion protection of oilfield equipment using inhibitors of types IA, ID
RST RSFSR 45-86: Sledge for children. Technical conditions
SP 16.13330.2011: Steel structures
SP 260.1325800.2023: Thin-walled steel structures made of cold-formed galvanized profiles and corrugated sheets. Design rules
STB 1274-2001: Suspensions for road vehicles made of sheet metal. General specifications
TU 4218-003-17416124-99: Connection box for electrical wiring. Technical conditions
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.