GOST 12423-66
ГОСТ 12423-66
|
|
Plastics. Standard atmospheres for conditioning and testing specimens
Пластмассы. Условия кондиционирования и испытания образцов (проб)
Status: Not effective - Superseded. Registration information 1069-st dated November 22, 2013 (official website of Rosstandart); IUS 2-2015
The standard establishes requirements for the conditions of conditioning and testing of all types of plastics and samples from them, which are close to normal ambient atmospheric conditions. The standard does not establish requirements for the conditions used for special tests or corresponding to special climatic conditions.
Стандарт устанавливает требования к условиям кондиционирования и испытания всех видов пластмасс и образцов из них, близкие к нормальным окружающим атмосферным условиям. Стандарт не устанавливает требований к условиям, применяемым для особых испытаний или соответствующих особым климатическим условиям.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Committee of Standards, Measures and Measuring Instruments under the Council of Ministers of the USSR,
12/20/1966
SKU: RUSS53887
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
007/2011 TR CU. On safety of products intended for children and adolescents »
Regulations and standards (to TR CU 007/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.1 Products of main chemical industries »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.080 Plastics »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.080 Plastics »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.080 Plastics »
83.080.01 Plastics in general »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.080 Plastics »
83.080.01 Plastics in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L29 Test methods. Packaging. Marking »
National Standards for OKSTU »
POLYMERS, PLASTIC MASSES, CHEMICAL FIBERS AND RUBBERS »
Control methods (testing, analysis, measurements) »
The Document is Replaced With:
GOST 12423-2013: Plastics. Standard atmospheres for conditioning and testing specimens
The Document is Referenced By:
GOST 10007-80: Polytetrafluoroethylene. Specifications
GOST 10292-74: Constructive glass-cloth-base laminate. Specifications
GOST 11234-91: Plastics. Determination of bulk factor of moulding materials
GOST 11262-80: Plastics. Tensile strength test method.
GOST 11368-89: Wood moulding compounds. Specifications
GOST 11629-75: Plastics. Method of test for coefficient of friction
GOST 11645-73: Plastics method of determination of melt flow index for thermoplastics
GOST 12.1.044-84: Occupational safety standards system. Fire and explosion hazard of substances and materials. Nomenclature of indicators and methods for their determination
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12020-72: Plastics. Testing methods of plastics resistance to chemical substances
GOST 12021-84: Plastics and ebonite. Method of determination of deflection under load temperature
GOST 12271-76: The copolymers of styrene. Specifications
GOST 13537-68: Plastics. Method for determination of splitting resistance
GOST 13744-87: Fluoroplast-3. Specifications
GOST 14236-81: Polymer films. Tensile strength test method
GOST 14359-69: Plastics. Testing methods. General requirements of the methods of mechanical testing
GOST 14906-77: Fluoroplastic-4D. Specifications
GOST 14926-81: Plastics. Method for determination of plasticizers migration
GOST 15139-69: Plastics. Methods for the determination of density (mass density)
GOST 15873-70: Flexible cellular plastics. Test methods for tensile properties
GOST 15875-80: Plastics. Methods for the determination of transmittance coefficient and turbidity
GOST 16185-82: Plastics. Method for determining of electrostatic properties
GOST 16214-70: Tape polyvinylchloride electro insulation. Specification
GOST 16336-2013: Polyethylene compositions for cable industry. Specifications
GOST 16336-77: Polyethylene compositions for cable industry. Specifications
GOST 16337-77: High-pressure polyethylene. Specifications
GOST 16338-85: Low-pressure polyethylene. Specifications
GOST 16398-81: Calenderer vinyl plastic film. Specifications
GOST 16782-92: Plastics. Determination of the brittleness temperature by impact
GOST 16783-71: Plastics. Method of determining the brittleness temperature at squeezing the specimen folded up as a loop
GOST 17302-71: Plastics. Method of test for shear strength
GOST 17370-71: Cellular rigid plastics. Tensile strength test method
GOST 17478-95: Moulding materials. Measuring glass-fibre-base laminate and granulated glass-fibre-base laminate. Specifications
GOST 17648-83: Glass filled polyamides. Specifications
GOST 18268-72: Flexible cellular plastics. Method of test for specific compression set
GOST 18336-73: Rigid cellular plastics. Method of test for modulus of elasticity
GOST 18564-73: Rigid cellular plastics. Static bend test
GOST 18599-2001: Polyethylene pressure pipes. Specifications
GOST 18599-83: Polyethylene pressure pipes
GOST 18616-80: Plastics. Method of determination of shrinkage
GOST 19109-84: Plastics. Method for the determination of Izod impact strength.
GOST 19478-74: Polyvinyl chloride plasticate for telephone cord insulation and shell. Specifications
GOST 20282-86: General-purpose polystyrene. Specifications
GOST 20869-75: Rigid cellular plastics. Method for determination of water absorption
GOST 20989-75: Rigid cellular plastics. Method for determining dimension stability
GOST 20990-75: Flexible cellular foams. Method for determination of fatigue at cyclic compression
GOST 21207-81: Plastics. Method for determination of flammability
GOST 21228-85: Celluloid. Specifications
GOST 21341-75: Plastics and ebonite. Method of determining the Martens heat resistance temperature
GOST 21793-76: Plastics. Method for determination of the oxygen index
GOST 22346-77: Flexible cellular plastics. Method for the determination cold-resistance
GOST 22648-77: Plastics. Methods for determination of hygienic characteristics
GOST 22689.0-77: Plastic sewage pipes and shaped parts for them. General technical requirements and test methods
GOST 23206-78: Rigid cellular plastics. Compression test method
GOST 24524-80: Metal-faced roof panels for industrial buildings with polyurethane foam thermal insulation. Specifications
GOST 24616-81: Plastics cellular and foam rubber. Method for determination of hardness
GOST 24621-91: Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
GOST 24622-91: Plastics. Determination of hardness. Rockwell hardness
GOST 24632-81: Materials polymer. Method for determination of smoke development
GOST 24729-81: Multireverse boxes from wood-glue compositions for commercial explosives. Specifications
GOST 24778-81: Plastics. Methods for shear strength determination in plane of the sheet
GOST 25.601-80: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for tensile properties on plane specimens at normal, elevated and law temperatures
GOST 25.602-80: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
GOST 25.603-82: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for tensile properties of ring specimens at normal, elevated and low temperatures
GOST 25.604-82: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for bending properties at normal, elevated and low temperatures
GOST 25015-81: Plastics cellular and foam rubber. Method for measuring linear dimensions
GOST 25076-81: Nonmetallic materials for interior trim of motor vehicles. Method of flammability determination
GOST 25250-88: PVC film for production of food and medicine package. Specifications
GOST 25428-82: Fluoroplast-42. Specifications
GOST 25717-83: Adhesives. Methods of determination of shear modulus of adhesive in adhesive bond
GOST 26128-84: Polymer films. Methods of tear resistance determination
GOST 26996-86: Polypropylene and copolymers of propylene. Specifications
GOST 28157-89: Tests for flammability of plastic materials
GOST 28250-89: High-impact polystyrene. Specifications
GOST 28804-90: Moulding phenol materials. General specifications
GOST 29127-91: Plastics. Thermogravimetry of polymers. Temperature scanning method
GOST 29244-91: Plastics. Small enclosures for conditioning and testing using aqueous solutions to maintain relative humidity at constant value
GOST 30095-93: Polyester moulding materials (premixes). General specifications
GOST 30973-2002: Polyvinylchloride profiles for windows and doors. Method of determination of resistance to climatic effects and estimation of life circle
GOST 31014-2002: Glass filled poliamides profils. Specifications
GOST 31938-2012: Fiber-reinforced polymer bar for concrete reinforcement. General specifications
GOST 32415-2013: Pressure thermoplastic pipes and their fittings for water supply and heating systems. General specifications
GOST 32486-2013: Polymer composite frame for reinforcement of concrete structures. Methods for determination of durability characteristics
GOST 32487-2013: Polymer composite frame for reinforcement of concrete structures. Methods for determination of characteristics of resistance to the corrosive media
GOST 32492-2013: Polymer composite frame for reinforcement concrete structures. Method for determination of physical and mechanical properties
GOST 32657-2014: Polymer composites. Test methods. Determination of temperature of deflection under load
GOST 32661-2014: Fibrе reinforced thermosetting plastic pipes and parts of pipelines. General specifications
GOST 32667-2014: Carbon fibre. Determination filament’s tensile properties
GOST 33118-2014: Combined materials on basis of aluminium foil. Specifications
GOST 4647-69: Plastic materials. The method of testing for a two-bearing impact bend
GOST 4647-80: Plastics. Method for determination of Charpy's impact strength
GOST 4648-71: Plastics. Method of static bending test
GOST 4651-82: Plastics. Compression test method
GOST 4670-91: Plastics. Determination of hardness. Ball indentation method
GOST 5689-79: Phenolic moulding compound. Specifications
GOST 5-78: Constructive textile and asbestos laminates. Specification
GOST 5960-72: Flexible PVC for insulation and protective jackets of wires and cables. Specifications
GOST 6943.11-93: Textile glass. Woven fabrics. Method for determination of conventional flexural stiffness. Fixed angle flexometer method
GOST 6943.13-94: Textile glass. Method for determination of stiffness of roving
GOST 6943.16-94: Textile glass. Woven fabrics. Non-woven cloth. Methods for determination of mass per unit area
GOST 6943.1-94: Textile glass. Yarns and rovings. Methods for determination of linear density
GOST 9.703-79: Unified system of corrosion and ageing protection. Plastic materials for items, used in tropical conditions. General requirements for selection and test methods
GOST 9.708-83: Unified system of corrosion and ageing protection. Plastics. Ageing test methods on exposure to natural and artificial climatic factors
GOST 9550-81: Plastics. Methods for determination of elasticity modulus at strength, compression and bending
GOST 9590-76: Laminated paper decorative plastic. Specifications
GOST 9639-71: Sheets from unplasticized polyvinylchloride (sheet vinyplast). Specifications
GOST R 50111-92: Polymeric membranes. Definition method of flat membranes strength
GOST R 50578-93: Polymer composites. Plate distortion shear test
GOST R 50598-93: Structural laminates based on phenol-formaldehyde resins. General specifications
GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications
GOST R 50838-95: Polyethylene pipes for the supply of gaseous fuel. Specifications
GOST R 51613-2000: Pressure pipes made of unplasticized polyvinylchloride. Specifications
GOST R 52134-2003: Pressure thermoplastic pipes and their jointing elements for water-supply and heating systems. General specifications
GOST R 52145-2003: Combined materials on basis of aluminium foil. Specifications
GOST R 52779-2007: Polyethylene fittings for gas pipelines. General specifications
GOST R 53655.1-2009: Plastics film and sheeting. Determination of impact resistance by the free-falling weight method. Part 1. Staircase methods
GOST R 53655.2-2009: Plastics film and sheeting. Determination of impact resistance by the free-falling weight method. Part 2. Instrumented puncture test
GOST R 54105-2010: Polymeric films and sheeting. Method for determination of wetting tension
GOST R 54106-2010: Polymeric films and sheeting. Method for determination of dimensional change on heating
GOST R 54468-2011: Flexible pipes with thermal insulation for district heating, hot and cold water networks. General specifications
GOST R 54923-2012: Polymer composite wall ties for multilayer envelope buildings. Specifications
GOST R 54924-2012: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Methods for determination of longitudinal tensile properties
GOST R 54925-2012: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Methods for determination of the apparent initial circumferential tensile strength
GOST R 55072-2012: Fiberglass reinforced thermosetting plastic vessels. Specifications
GOST R 55078-2012: Fiberglass reinforced thermosetting plastic pipes. Glass reinforced thermosetting plastics cylinder shells of chimney and flue-pipes. Specifications
GOST R 55732-2013: Mining equipment. Support of mine working. Polymer net for the guard mine working. Specifications
GOST R 55875-2013: Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of bolted flange joints
GOST R 55877-2013: Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for determination of resistance to wear by abrasive wheels
ODM 218.2.047-2014: Method for assessing the durability of geosynthetic materials used in road construction
ODM 218.5.006-2010: Recommendations on testing methods for geosynthetic materials, depending on their field of application in the road sector
RD 50-375-82: Guidelines. Development of annual plans for state standardization. Common Industrial Products
RD 50-675-88: Guidelines. Calculations and tests of strength in engineering. Composite materials. Interlayer shear test methods
SP 42-103-2003: Design and construction of polyethilene gas pipelines and renovation of underground gas pipelines
SP 42-105-99: Quality control of welded joints of polyethylene gas pipelines
TU 301-05-17-89: Fluoroplast-40
TU 6-19-215-83: Pipes for electrical wiring. Smooth unplasticized polyvinyl chloride. Technical conditions
TU 95 1613-01: Polyethylene heat shrink tubes. Technical conditions
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.