GOST 11150-84
ГОСТ 11150-84
|
|
Metals. Methods of tension tests at low temperatures
Металлы. Методы испытания на растяжение при пониженных температурах
Status: Effective. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)
The standard establishes tensile test methods for ferrous and non-ferrous metals and products made from them with a nominal diameter or smallest size in cross section of 3.0 mm or more, and for thin sheets and strips from 0.5 in thickness, the definition at temperatures from 10 to minus 100 degrees With the characteristics of mechanical properties: ultimate strength; yield strength of the physical; yield strength conditional; temporary resistance; relative uniform elongation; relative elongation after rupture; relative narrowing of the cross section after rupture.
Стандарт устанавливает методы испытания на растяжение черных и цветных металлов и изделий из них номинальным диаметром или наименьшим размером в поперечном сечении 3,0 мм и более, а для тонких листов и лент толщиной от 0,5 определение при температурах от 10 до минус 100 град. С характеристик механических свойств: предела прочности; предела текучести физического; предела текучести условного; временного сопротивления; относительного равномерного удлинения; относительного удлинения после разрыва; относительного сужения поперечного сечения после разрыва.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
7/16/1984
SKU: RUSS54084
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.2 Testing of manufacturing products »
ISO classifier »
77 METALLURGY »
77.040 Metal Testing »
77.040.10 Mechanical testing of metals »
National standards »
77 METALLURGY »
77.040 Metal Testing »
77.040.10 Mechanical testing of metals »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V0 General rules and regulations on metallurgy »
V09 Test methods. Packaging. Marking »
National Standards for OKSTU »
CAST IRON, FERRO ALLOYS, STEEL »
Control methods (testing, analysis, measurements) »
National Standards for OKSTU »
FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) »
Control methods (testing, analysis, measurements) »
National Standards for OKSTU »
RAW MATERIALS OF NON-FERROUS METALS, NON-FERROUS METALS AND THEIR ALLOYS »
Control methods (testing, analysis, measurements) »
As a Replacement Of:
GOST 11150-75: Metals. Tensile Test Method at Low Temperatures
The Document References:
GOST 12162-77: Solid carbon dioxide
GOST 14894-69: Thermoelectric standard 2-class and general industry use thermometers for low temperatures. Methods and means of verification
GOST 1497-84: Metals. Methods of tension test
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 28498-90: Liquid-in-glass thermometers
GOST 9245-79: Measuring direct current potentiometers
GOST 9293-74: Gaseous and liquid nitrogen. Specifications
The Document is Referenced By:
GOST 23870-79: Weldability of steels. Test method for evaluation of fusion welding effect on parent metal
GOST 25.506-85: Design, calculation and strength testing. Methods of mechanical testing of metals. Determination of fracture toughness characteristics under the static loading
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 977-88: Steel castings. General specifications
GOST R 50.04.06-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for new material (base or welding)
GOST R 50.05.12-2018: Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Monitoring radiation embrittlement of the reactor vessel
GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments
GOST R 56467-2015: Space systems. Powder metal and metal composite materials. Classification. Nomenclature of indices
GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure
GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements
GOST R 58419-2019: Additive technology. Products made of titanium alloys made by selective electron beam fusion. General specifications
OST 35-22-83: Pipe culverts made of corrugated metal intended for railroad and auto road. Specifications.
PB 03-164-97: Standards for Fabrication of Steam and Hot-Water Boilers, Pressure Vessels, and Steam and Hot Water Piping by Welding
RD 03-421-01: Guidelines for the diagnosis of the technical condition and the determination of the residual service life of vessels and apparatus
RD 09-244-98: Instructions for diagnostics of technical condition of vessels, pipes and compressors, industrial ammonia refrigeration plants.
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
RD 26-11-08-86: Welded Joints. Mechanical Tests
RD 26-17-086-88: Weld joints. Quality control of heat treatment equipment
RD 31.3.3-97: Guidelines on technical control of waterworks in maritime transport. Ministry of Transport, DMT Soyuzmorniiproekt, 1997
SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel
SNiP 3.06.07-86: Bridges and Pipes. Rules for Inspection and Testing
ST CKBA 125-2020: Pipe fittings. Types of control and testing
TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.