GOST 9696-82
ГОСТ 9696-82
|
|
Multi-revolution dial indicators graduated in 0,001 and 0,002 mm. Types. Basic parameters. Specifications
Индикаторы многооборотные с ценой деления 0,001 и 0,002 мм. Технические условия
Status: Effective. The limitation of the effectiveness period has been lifted: Decree of the State Standard No. 637 of 02.15.82
The standard applies to multi-turn lever-toothed indicators with a scale of 0.001 and 0.002 mm.
Стандарт распространяется на многооборотные рычажно-зубчатые индикаторы с ценой деления 0,001 и 0,002 мм.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
2/15/1982
SKU: RUSS54204
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P5 Instruments, tools and devices for linear, angular, profile and spatial measurements »
P53 Instruments for measuring lengths (outer and inner dimensions) »
As a Replacement Of:
GOST 9696-75: Multi-revolution dial indicators graduated in 0,001 and 0,002 mm. Types. Basic parameters and dimensions. Technical requirements
The Document References:
GOST 11007-66: Measuring tips of apparatus for linear measurements. Specifications
GOST 13762-80: Instruments for linear and angular measurements. Marking, packing, transportation and storage
GOST 13762-86: Measuring means for linear and angular measurements. Marking, packing, transporting and storage
GOST 15593-70: Indication. Gauge heads and transducers. Connected sizes
GOST 16093-70: Metric thread for diameters from 1 up to 600 mm. Tolerances
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 2.601-95: Operational documents
GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means
GOST 8.208-76: The State Measurement System. Indicators multi-turn. Methods and means of verification
GOST 8.383-80: State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols
The Document is Referenced By:
GOST 10480-88: Powder metal compacting mechanical automatic machines. Parameters and dimensions. Norms of accuracy
GOST 10560-88: Hydraulic sheet bending presses. Parameters and dimensions. Norms of accuracy
GOST 10635-88: Particle boards. Methods for determination of ultimate strength and modulus of elasticity in bending
GOST 10739-84: Automatic sheet stamping presses with underheath drive. Parameters and dimensions. Norms of accuracy
GOST 10918-82: Micaceons plates and micaceons details. Test methods
GOST 1173-2006: Copper foil, ribbons, sheets and plates. Specifications
GOST 12998-85: Polystyrene film. Specifications
GOST 13297-86: Diamond cutting tools and inserts
GOST 13338-86: Modified wood. Method for determination of hardness, temporal elastic deformation and residual strain
GOST 13750-88: Micaceous plates for instrument-making. Specifications
GOST 14080-78: Precision alloy strip with specified temperature coefficient of linear expansion. Specifications
GOST 15475-89: Simple action closed single-crank presses. Norms of accuracy
GOST 1595-90: Aluminium-manganese bronze strips and ribbons. Specifications
GOST 16153-80: Monocrystalline germanium. Specifications
GOST 16181-82: Diamond grinding wheels
GOST 16483.17-81: Wood. Method for determination of static hardness
GOST 17245-79: Soils. Method of laboratory determination of temporary resistance for single-axial compression
GOST 1761-2016: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications
GOST 1761-92: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications
GOST 18326-87: Low-alloyed zinc sheets for one-stage and multistage etching. Specifications
GOST 19658-81: Monocrystalline silicon in ingots. Specifications
GOST 21153.0-75: Rocks. Sampling and general requirements for the methods of physical testing
GOST 21523.7-87: Modified wood. Method for determination of modulus of elasticity in static bending
GOST 21546-88: Hammer dies for die forging
GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications
GOST 22082-76: Injection mould bases, detail-blanks and details of injection moulds. Specifications
GOST 24234-80: Polyethylene terephtalate film (polyester film). Specifications
GOST 24941-81: Rocks. Methods for determination of mechanical properties by pressing with spherical indentors
GOST 25951-83: Thermoshrinking polyethylene film. Specifications
GOST 26996-86: Polypropylene and copolymers of propylene. Specifications
GOST 28985-91: Rocks. Method of determination of deformation characteristics under uniaxial compression
GOST 29012-91: Powder metallurgy. Method of determination of compacts dimensional changes after compacting pressure relief and at the time of sintering
GOST 30051-93: Spline grinding machines. Basic dimensions. Standards of accuracy
GOST 30416-2012: Soils. Laboratory testing. General requirements
GOST 30416-96: Soils. Laboratory testing. General requirements
GOST 30629-2011: Materials and products facing of rocks. Test methods
GOST 30629-99: Cladding materials and products made of natural stone. Test methods
GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST 31620-2012: Surgical sutures. General technical requirements. Test method
GOST 33694-2015: Plastics. Determination of linear dimensions of test specimens
GOST 34854-2022: Calibers for connections with tapered threads of casing, tubing, drilling and pipeline pipes. Methods of measuring geometric parameters
GOST 3899-81: Transducers with electric contacts for control of linear dimensions. Specifications
GOST 4748-92: Silicon-manganese bronze strips and ribbons. Specifications
GOST 495-77: Copper sheets and ribbons. Specifications
GOST 5384-89: Knuckle-joint cold stamping presses. Parameters and dimensions. Dimensions and arrangement of the slots and openings for fixing the tools. Norms of accuracy
GOST 5627-87: Automatic wire nail machines. Parameters and dimensions. Norms of accuracy
GOST 713-88: Screw presses. Рarameters and dimensions, norms of accuracy
GOST 7766-88: Single-acting closed two-crank presses. Parameters and dimensions. Norms of accuracy
GOST 8.003-2010: State system for ensuring the uniformity of measurements. Tool-making microscopes. Verification procedure
GOST 8.003-83: State system for ensuring the uniformity of measurements. Tool-making microscopes. Methods and means of verification
GOST 8.490-83: State system for ensuring the uniformity of measurements. Instruments for measurements of gear interaxial distance. Methods of verification
GOST 8260-88: Sheet stamping multiposition automatic press. Parameters and dimensions. Norms of accuracy
GOST 9408-89: Simple action open single crank presses. Parameters and dimensions. Norms of accuracy
GOST 9506.7-74: Brushes for electrical machines. The method for determination of the commutator's characteristics
GOST 9559-89: Lead sheets. Specifications
GOST 9625-87: Laminated glued wood. Method for determination of strength and elasticity module in static bending
GOST 9861-88: Four-station cold-formers for timber articles of rod type. Parameters and dimensions norms of accuracy
GOST R 51667-2000: Brushes for electrical machines. Methods for determination of the commutator characteristics
GOST R 52804-2007: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST R 53005-2008: Surgical suture materials. General technical requirements. Test methods
GOST R 54913-2012: Modified wood. Method for determination of pressure in swelling
GOST R 55657-2013: Modified wood. Methods of plugs strength, hardness and toughness determination
GOST R 56064-2014: Safety of attractions. Capital repair of attractions. Procedure
GOST R ISO 230-1-2010: Machine tools tests. Part 1. Measurement techniques of geometrics parameters
MI 1532-86: Guidelines. GSE. Levels frame and squared for mechanical engineering. Method of verification
MI 1673-87: State system for ensuring uniformity of measurements. Stakes and supports for gage heads. Methods of control
MI 1729-87: State system for ensuring uniformity of measurements. Calibration lines. Method of verification
MI 1799-87: Guidelines. Squares testing 90 degrees. Control method
MI 1801-87: Methodical instructions. State system for ensuring uniformity of measurements. Electric recorders for linear measurements. Verification Method
MI 1876-88: Recommendations. GSE. Multiturn indicators with a scale division of 0.001 and 0.002 mm. Method of verification
MI 1937-88: Gauges for taper connections. Methods of control
MI 2029-89: Calibration and marking prisms with one prismatic recess and grip. Methods of control
MI 2031-89: Calibration and marking iron prisms. Methods of control
MI 2077-90: Micrometers with inserts
MI 2193-92: Inside calipers, with a scale division of 0.001 and 0.002 mm.
MI 2194-92: State system for ensuring uniformity of measurements. Nutromera indicator with the price of division of 0.01 mm. Methods of verification
MI 2314-2000: Recommendation. GSOEI. Codifier of groups of measuring instruments
MP 203-9-2020: Squares testing 90 degrees of the Calibron trademark. Verification method
OST 13-86-80: Metrological support of furniture production. General requirements for calibration data base and instruments. Gauges monitoring.
R 50-54-100-88: Recommendations. The method of experimental evaluation of anti-slip properties of construction and lubricants
RD 34.10.102-91: Specified Quantity Allowances for Means of Mechanization, Special Accessories, and Tools for Overhaul of Main Energy Equipment of Thermal Power Stations
RD 34.17.425-86: Procedural Guidelines for X-Ray Detection of Macrodamage to Metal in Circulation Piping and Housing Equipment of Electric Power Generating Stations
RD 50-98-86: Methodological instructions. Selecting universal means of dimensional measurement up to 500 mm (application as per GOST 8.051-81).
TU 16-525.609-85: Asynchronous motors AIS80 - AIS112, supplied for export. Technical conditions
TU 24-09-613-84: Electric overhead traveling cranes with a lifting capacity of 5 tons of lightweight construction with electric hoist
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.