GOST 18160-72
ГОСТ 18160-72
|
|
Fasteners. Packing. Marking. Transportation and storage
Изделия крепежные. Упаковка. Маркировка. Транспортирование и хранение
Status: Effective. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)
The standard establishes the requirements for anti-corrosion protection, the packaging of bolts, screws, studs, nuts, rivets, washers, screws, pins, cotter pins and other fasteners and rules for labeling consumer and transport packaging. The standard does not apply to packaging fasteners included in the sets of spare parts.
Стандарт устанавливает требования к противокоррозионной защите, упаковке болтов, винтов, шпилек, гаек, заклепок, шайб, шурупов, штифтов, шплинтов и других крепежных изделий и правила маркирования потребительской и транспортной тары. Стандарт не распространяется на упаковку крепежных изделий, входящих в комплекты запасных частей.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
10/9/1972
SKU: RUSS54296
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
21 Mechanical systems and general purpose devices »
Standards for pipe fittings (TPA) »
13. Standards for basic components and parts of injection molding machines »
13.2 Fasteners »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.01 Fasteners in general »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.060 Fasteners »
21.060.01 Fasteners in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G3 Fasteners for general engineering applications »
G39 Test methods. Packaging. Marking »
National Standards for OKSTU »
METAL PRODUCTS FOR INDUSTRIAL PURPOSE (HARDWARE) »
Marking, packaging, transportation and storage »
The Document References:
GOST 10354-82: Polyethylene film Specifications
GOST 10877-76: Preservative oil K-17
GOST 12301-81: Cartons made from cardboard, paper
GOST 12302-83: Bags made of polymeric and composite materials. General specifications
GOST 13502-86: Paper bags for loose products
GOST 14192-96: Cargo marking
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15171-78: Additive АКОР-1. Specifications
GOST 15623-84: Wooden cases for tools and accessories. Specifications
GOST 15841-88: Wooden boxes for the production of agricultural and tractor machine-building industry
GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage
GOST 16295-93: Anticorrosion paper
GOST 16536-90: Wooden boxes for automotive industry products
GOST 18617-83: Wooden cases for hardware. Specifications
GOST 19906-74: Sodium nitrite technical. Technical conditions
GOST 20799-88: Industrial oils Specifications
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 23639-79: Additive KP
GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions
GOST 515-77: Bitumized and tarred packaging paper
GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications
GOST 8828-89: Base paper and two-layer waterproof packaging paper
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9078-84: Flat pallets
GOST 9142-90: Boxes of corrugated board. General specifications
GOST 9327-60: Paper and paper products. Trimmed sizes
GOST 9557-87: Flat wooden pallets with dimensions 800ґ1200 mm
GOST 9569-79: Paraffin paper
The Document is Referenced By:
GOST 10304-80: Rivets
GOST 10450-78: Diminished washers. Product grades A and C. Specifications
GOST 10461-81: Shake-proof washers with teeth. General specifications
GOST 10494-80: Studs for flanged connections with lens-shaped seals for pn - 10-100 MPa (100-1000 kgf/sq sm). Technical requirements
GOST 10495-80: Hexagon nuts for flange joints for pn above 10 to 100 MPa (above 100 to 1000 kgf/cm2)
GOST 10602-94: Hexagon head bolts with thread diameter over 48 mm. Product grade B. Specifications
GOST 10605-94: Hexagon nuts with thread diameter over 48 mm. Product grade B. Specifications
GOST 10607-94: Hexagon thin nuts (chamfered) with thread diameter over 48 mm. Product grade B. Specifications
GOST 10618-80: Self-tapping screws for metal and plastic
GOST 10657-80: Round nuts slotted on face. Specifications
GOST 10773-80: Grooved pins-full-length taper grooved. Specifications
GOST 10774-80: Cylindrical pins with drilled ends. Specifications
GOST 10906-78: Square taper washers. Specifications
GOST 11074-93: Hexagonal socket flat-point set screws. Product grades A and B. Specifications
GOST 11075-93: Hexagonal socket dog-point set screws. Product grades A and B. Specifications
GOST 11371-78: Washers. Specifications
GOST 11447-80: Locking studs for Py 10-100 MPa (100-1000 kgf/cm2). Technical requirements
GOST 1147-80: Wood details and articles for one-two storey dwelling and public buildings
GOST 11530-2014: Rail joint bolts. Specifications
GOST 11530-93: Rail joint bolts. Specifications
GOST 11532-2014: Nuts for rail joints. Specifications
GOST 11532-93: Nuts for rail joints. Specifications
GOST 11648-75: Quick removable thrust washers. Specifications
GOST 11674-75: Crawel tractors. Grouser shoe bolts. Specifications
GOST 11871-80: Slotted round nuts, product grade A. Specifications
GOST 11871-88: Slotted round nuts, product grade A. Specifications
GOST 11872-80: Tongued lock washers. Specifications
GOST 11872-89: Tongued lock washers. Specifications
GOST 12.2.073-82: Occupational safety standards system. Pressure-operated vessels. Bolts, studs and nuts. Technical requirements
GOST 12207-79: Cylindrical pins with internal thread. Specifications
GOST 12459-67: Strengthening bolts for machined slots. Design
GOST 12460-67: Nuts with lock screws. Design
GOST 12461-67: Nuts hexagonal high with acme thread. Design
GOST 12462-67: Nuts hexagonal with bead and acme thread. Design
GOST 12644-80: Hollow and semi-hollow rivets. Specifications
GOST 12850-80: Cylindrical notched pins with engaged ends. Sizes and technical requirements
GOST 12946-67: Overhead collar nut for machine retaining devices. Design and dimensions
GOST 13152-67: Bolts for machine slots. Design and dimensions
GOST 13427-68: Nuts with hole for handle for machine retaining devices. Design and sizes
GOST 13428-68: Dog point pressure screws for machine retaining devices. Design
GOST 13429-68: Pressure screws with point for foot for machine retaining devices. Design
GOST 13432-68: Pressure dog point screws with hole for handle for machine retaining devices. Design
GOST 13433-68: Pressure screws with hole for handle and point for foot for machine retaining devices. Design
GOST 13434-68: Hexagon head dog point pressure screws for machine retaining devices. Design
GOST 13435-68: Hexagon head pressure screws with point for foot for machine retaining devices. Design
GOST 13438-68: Spherical washers for machine retaining devices. Design
GOST 13439-68: Cone washers for machine retaining devices. Design
GOST 13897-68: Check square countersunk headed screws with shortened cylindrical end. Design
GOST 13944-86: Retaining spring flat rings and grooves for them. Specifications
GOST 14229-78: Spring pins. Specification
GOST 1476-93: Cone-point straight slatted set screws. Product grades A and B. Specifications
GOST 1477-93: Flat-point straight slotted set screws. Product grades A and B. Specifications
GOST 1478-93: Dog-point straight slotted set screws. Product grades A and B. Specifications
GOST 1479-93: Cup-point straight slotted set screws. Product grades A and B. Specifications
GOST 14803-85: Rivets (high precision). General specifications
GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications
GOST 15763-91: Pipeline thread connections for Py up to 63 MPa (up to 630 kgf/cm2)
GOST 16016-2014: Clamp bolts for rail track fastenings. Specifications
GOST 16016-79: Bolts and screw-nuts for rail track crossing
GOST 16017-2014: Inserted bolts for rail track fastenings. Specifications
GOST 16017-79: Inserted bolts for rail track fastenings.
GOST 16018-2014: Nuts for clamp and inserted bolts of rail track fastenings. Technical specifications
GOST 16018-79: Nuts for clamp and inserted bolts of rail track fastenings
GOST 17314-81: Devices for fastening thermal insulation of steel vessels and equipment. Design and dimensions. Technical requirements
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 18123-82: Washers
GOST 18126-72: Bolts, studs and nuts with thread diameter over 48 mm. Specifications
GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications
GOST 19115-91: Railway lock washers. Specifications
GOST 19119-80: Taper axially splitted pins. Specifications
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 21338-75: Knurled-head screws. Technical requirements
GOST 21797-2014: Two-turn spring washers for railway track. Specifications
GOST 21797-76: Two-turn spring washers for railway track. Technical specifications
GOST 22011-76: Passenger, Freight, and Medical Service Elevators. Specification
GOST 22356-77: High strength bolts and nuts аnd washes. General specifications
GOST 2300-81: Inserted pins with a tongue. Specifications
GOST 23118-2012: Building steel structures. General specifications
GOST 23118-99: Steel construction structures
General Technical Specifications
GOST 23157-78: Inserted washers for concrete ties. Specifications
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 24296-80: Hardened cylindrical pins. Specifications
GOST 24379.0-2012: Foundation bolts. General specifications
GOST 24379.0-80: Foundation bolts. General specification
GOST 26805-86: Tubular rivet for one-sided
GOST 26862-86: Rins. General specifications
GOST 27579-88: Rectangular formed-welded section roof trusses. Specifications
GOST 28778-90: Expansion bolt self-anchoring for building. Specifications
GOST 31.0171.01-91: Devices for metal cutting machine tools. Parts and assembly units of general application. General technical requirements
GOST 397-79: Split pins
GOST 6402-70: Lock washers. Specifications
GOST 6958-78: Enlarged washers. Product grades A and C. Specifications
GOST 799-73: Fishplate bolts for broad gauge. General requirements
GOST 809-2014: Track wood screws. General technical specifications
GOST 809-71: Track wood screws. Specifications
GOST 8144-73: Fishplate bolts for narrow gauge
GOST 8878-93: Hexagonal socket cone-point set screws. Product grades A and B. Specifications
GOST 9051-68: Hexagon socket dog point pressure screws for machine retaining devices. Design
GOST 9465-79: Taper pins with threaded stem. Construction and dimensions
GOST 9649-78: Steel washers of accuracy grade A for pins. Specifications
GOST 9650-80: Pins. Specifications
GOST R 50253-92: Rail joint bolts. Specifications
GOST R 50403-92: Countersunk head screws. Product grades A and B. Specifications
GOST R 50404-92: Slotted pan head screws. Product grades A and B. Specifications
GOST R 50405-92: Slotted cheese head screws. Product grades A and B. Specifications
GOST R 50406-92: Raised countersunk head screws. Product grade A and B. Specifications
GOST R 50592-93: Hexagon nuts with flange. Product grade A. Specifications
GOST R 51121-97: Non-food products. Information for consumer. General requirements
GOST R 51163-98: Thermodiffusion zinc coatings on fasteners and other small products. General requirements and control methods
GOST R 52643-2006: High-strength screws and nuts washers for metal structures. General specifications
GOST R 53664-2009: High-strength cheese-head and conical bolts for bridge building. Nuts and washers for them. Specifications
GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.
GOST R 55738-2013: Studs and ceramic ferrules for stud welding
GOST R ISO 7049-93: Cross recessed pan head tapping screws. Specifications
GOST R ISO 7050-93: Cross recessed countersunk head tapping screws. Specifications
GOST R ISO 7051-93: Cross recessed raised countersunk head tapping screws. Specifications
ON 025 160-63: Nuts of fastening of disks of wheels of trucks, buses, trailers and semi-trailers. Executive Sizes
OST 20-1-74: Steel fencing for stairs, balconies and roofs. General technical requirements.
OST 26-01-144-81: Studs, nuts, washers, threaded sockets, protective caps for vessels and apparatus for pressure over 9.81 up to 98.1 MPa (over 100 up to 1000 kgf/cm2). General technical requirements. Acceptance rules. Test methods. Marking.
OST 26-1420-75: Adjusting screws, nuts and support plates for equipment installation. Construction and dimensions.
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
OST 34 017-73: The rivet is combined. Design and dimensions. Technical requirements
OST 34 021-73: Special bolts. Design and dimensions
OST 34-13-016-88: Self-tapping bolts. Design and dimensions. Technical requirements
OST 34-13-017-88: The rivet is combined. Design and dimensions. Technical requirements
OST 37.001.125-81: Countersunk screws. Construction and dimensions.
OST 37.001.163-75: Pins. Design, dimensions and technical requirements.
OST 37.001.163-97: Fingers. Technical specifications
OST 37.001.179-82: Taper thread plugs. Specifications.
OST 45.85-96: Wooden and metal shelf stands for electric power storages applied by telecommunication enterprises. General requirements.
ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements
TU 34 10.10055-97: Vertical cylindrical steel tanks. Technical conditions
TU 5216-055-00110604-2007: Fences, road, holding for cars of barrier type, road and bridge groups, one-sided and two-sided
TU 67-411-82: 10HNDP and 10HDP steel profiles, cold-formed with trapezoidal corrugation for construction. Technical conditions. Experimental batch 15000 t
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.