imgalt

GOST 5365-83

ГОСТ 5365-83

Electrical measuring instruments. Dials and scales. General technical requirements

Приборы электроизмерительные. Циферблаты и шкалы. Общие технические требования

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)

The standard applies to the dials and scales of reading devices showing electrical measuring instruments designed to measure electrical and non-electrical quantities, if an electrical quantity is applied to the input of these instruments and can be checked by means of electrical quantity measurements, and establishes quality requirements, ergomical requirements and principles for constructing scales. The standard does not apply to: dials aircraft indicators and instruments; dials and instrument scales in terms of the technical requirements established in the standards for specific types of devices; dials and instrument scales with readings on the level of the liquid; dials and instrument scales with a report of readings only through magnifying optical devices; dials and scales of instruments developed prior to the introduction of the standard.

Стандарт распространяется на циферблаты и шкалы отсчетных устройств показывающих электроизмерительных приборов, предназначенных для измерения электрических и неэлектрических величин, если на вход этих приборов подается электрическая величина и их можно проверить средствами измерений электрических величин, и устанавливает требования к качеству, эргомические требования и принципы построения шкал. Стандарт не распространяется на: циферблаты авиационных индикаторов и приборов; циферблаты и шкалыприборов в части технических требований, которые установлены в стандартах на приборы конкретных видов; циферблаты и шкалы приборов с отсчетом показаний по уровню жидкости; циферблаты и шкалы приборов с отчетом показаний только через увеличительныеоптические устройства; циферблаты и шкалы приборов, разработанных до введения в действие стандарта.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 5/27/1983

SKU: RUSS54374

Price: $151.00



imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.2 Technical equipment of testing laboratories » 3.2.2 Measuring instruments and test equipment » 3.2.2.1 Basic requirements for instruments and test equipment »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.220 Electricity. Magnetism. Electrical and magnetic measurements » 17.220.20 Measurement of electrical and magnetic quantities »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.220 Electricity. Magnetism. Electrical and magnetic measurements » 17.220.20 Measurement of electrical and magnetic quantities »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P0 General rules and regulations for instrument-making industry » P04 Details and components of general application in instrument making »

National Standards for OKSTU » GENERAL PURPOSE INSTRUMENTS AND AUTOMATION » Accessories, spare and auxiliary parts for electrical measuring instruments »


As a Replacement Of:

GOST 5365-73: Measuring instruments. Dials and scales. Technical requirements

The Document References:

GOST 16263-70: State system for ensuring the uniformity of measurements. Metrology. Terms and definitions

GOST 22902-78: Man-machine system. Reading device of visual display. General ergonomic requirements

GOST 23217-78: Direct-reading indicating electrical measuring instruments. Marking symbols

GOST 26.008-85: Lettering for inscriptions applied by engraving method. Executive dimensions

GOST 26.020-80: Types for means of measuring and automation. Inscription and main dimensions

GOST 2930-62: Measuring instruments. Characters and signs

GOST 8.401-80: State system for ensuring the uniformity of measurements. Accuracy classes of measuring instruments. General requirements

GOST 8.417-81: State system of ensuring the uniformity of measurements. Units of physical quantities

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

The Document is Referenced By:

GOST 10374-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 7. Special requirements for multi-function instruments

GOST 12.2.056-81: Occupational safety standards system. Electric and diesel locomotives for 1520 mm gauge. Safety requirements

GOST 13045-81: Rota meters

GOST 13350-78: Gsp conductivity liquid analyzers

GOST 18140-84: SSI differential pressure gauges. General specifications.

GOST 21339-82: Tachometers

GOST 22018-84: Amperometric analysers for dissolved oxygen SSI. General technical requirements

GOST 22224-83: Hand flat spring dynamometers. Specifications

GOST 22261-94: Measuring instruments for electrical

GOST 23301-78: Universal readjustable dies for element-by-element stamping. Technical requirements

GOST 23474-79: Cable apparatus. General technical requirements, acceptance rules and test methods

GOST 24469-80: Instruments for measurements of laser radiation parameters

GOST 24844-81: Dials and scales of pressure gauges, vacuum gauges, manometers, pressure gauges, pull gauges, for display and recording. Technical requirements. Marking

GOST 25741-83: Dials and scales of manometric thermometers. Technical requirements and marking

GOST 26153-84: One-column dividing stands

GOST 27735-94: Domestic scales

GOST 28724-90: Speed gas meters

GOST 31.0151.01-90: Universal and special-purpose setters

GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines

GOST 33327-2015: Railway bus. General technical requirements

GOST 6376-74: Hand anemometer accounting device. Specifications

GOST 7164-78: SSI self-balancing servoinstruments. General specifications

GOST 7193-74: Hand induction anemometer. Specifications

GOST 8.281-2013: State system for ensuring the uniformity of measurements. Mechanical motion quantities measuring means for traction rolling stock. Verification procedure

GOST 8476-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3. Special requirements for wattmeters and varmeters

GOST 9018-89: Fuel dispensing pumps. General specifications

GOST 9736-91: Electric apparatus of direct transformation for measuring non -electric values. General technical requirements and test methods

GOST R 50759-95: Gas analyses for control of industrial and transport emissions. General specifications

GOST R 50760-95: Gas and aerosol analysers for air pollution monitoring. General specifications

GOST R 51945-2002: Aspirators. General specifications

GOST R 54750-2011: Railway bus. General technical requirements

GOST R 8.725-2010: State system for ensuring the uniformity of measurements. Mechanical motion quantities measuring means for traction rolling stock. Verification procedure

MI 125-77: Method of calibration of ultrasound therapy apparatus

NPB 197-2001: Fire elevators. General technical requirements. Test methods

NPB 314-2003: Firefoam elevators. General technical requirements. Test methods

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!