GOST 9013-59
ГОСТ 9013-59
|
|
Metals. Method of measuring Rockwell hardness
Металлы. Метод измерения твердости по Роквеллу
Status: Effective - Introduced for the first time. IUS 2-59 The limitation of effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)
The standard establishes the method of measuring Rockwell hardness (scales A, B, C, D, E, F, G, H, K) at a temperature of 20 (plus 15 minus 10) ° C.
Стандарт устанавливает метод измерения твердости по Роквеллу (шкалы А, В, С, D, E, F, G, H, K) при температуре 20 (плюс 15 минус 10) °С.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Committee of Standards, Measures and Measuring Instruments under the Council of Ministers of the USSR,
2/4/1959
SKU: RUSS54381
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
001/2011 TR TS. On safety of railway rolling stock »
Regulations and standards (to TR CU 001/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
002/2011 TR TS. On safety of high-speed rail »
Regulations and standards (to TR CU 002/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
003/2011 TR TS. On safety of railway infrastructure »
Regulations and standards (for TR CU 003/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.2 Testing of manufacturing products »
ISO classifier »
77 METALLURGY »
77.040 Metal Testing »
77.040.10 Mechanical testing of metals »
National standards »
77 METALLURGY »
77.040 Metal Testing »
77.040.10 Mechanical testing of metals »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V0 General rules and regulations on metallurgy »
V09 Test methods. Packaging. Marking »
National Standards for OKSTU »
CAST IRON, FERRO ALLOYS, STEEL »
Control methods (testing, analysis, measurements) »
National Standards for OKSTU »
FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) »
Control methods (testing, analysis, measurements) »
National Standards for OKSTU »
RAW MATERIALS OF NON-FERROUS METALS, NON-FERROUS METALS AND THEIR ALLOYS »
Control methods (testing, analysis, measurements) »
As a Replacement Of:
OST 10242-40: Metals. Test methods. Rockwell Hardness Test
The Document References:
GOST 23677-79: Hardness meters for metals
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 3722-81: Rolling bearings. Balls. Technical requirements
GOST 8.064-94: State system for ensuring the uniformity of measurements. State verification schedule for means measuring hardness on Rockwell and Super-Rockwell scales
GOST 9377-81: Diamond indenters and hammers for metal and alloys hardness testing machines. Specifications
The Document is Referenced By:
DiOR 05: Methodology of diagnosing of technical condition and determining of residual life of process equipment of oil refineries and petrochemical plants
FTS ZhT SI 019-99: Technical Regulations. Measuring instruments and means of admission control of industry application. Certification requirements
FTS ZhT TsT-TsV-TsL 062-2000: Rolling stock of railways. Springs cylindrical screw. Certification requirements
GOST 10047-62: High speed steel cutting tools. Specifications
GOST 10051-75: Metal covered electrodes for manual arc surfacing of upper layers with special properties types
GOST 10083-81: Taper reamers with taper shank
GOST 10403-80: Constructional steel trowels. Technical requirements
GOST 10461-81: Shake-proof washers with teeth. General specifications
GOST 10465-74: Pivoted core bit tongs
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10670-77: Log band saws. Technical conditions
GOST 10673-75: T-slot cutters with hard metal tips. Specifications
GOST 10702-2016: Rolled high-quality structural non-alloy and alloy steel for cold forging. General specifications
GOST 11031-76: Metal travellers for rings of spinning and ring-doubling frams. Specifications
GOST 11042-90: Construction steel hammers. Specifications
GOST 11290-80: Circular woodworking groove cutters
GOST 11291-81: Carbide and hss tipped woodcutting disk grooving cutters
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 11435-75: Blacksmith's hand and hammer tools. Technical requirements
GOST 11546-65: M stalinite powder. Technical requirements
GOST 11629-2017: Plastics Method for determining the coefficient of friction
GOST 11629-75: Plastics. Method of test for coefficient of friction
GOST 11674-75: Crawel tractors. Grouser shoe bolts. Specifications
GOST 11737-93: Hexagon socket screw keys. Specifications
GOST 11801-74: Foundry moulding and finishing tool. Specifications
GOST 1183-80: Knives for planing tools. Specification
GOST 11871-88: Slotted round nuts, product grade A. Specifications
GOST 11906-77: Spiral bevel and hypoid gear-shaping cutter heads. Specifications
GOST 11996-79: Batch-type mixers for rubber. General specifications
GOST 1203-75: The key of the brake shoe for cars of the railways with broad gauge 1520 mm. Specifications
GOST 12132-66: Electrowelded and seamless steel tubes for automotive and bicycle industries. Specifications
GOST 12253-88: Clips for the ball-and-socket joints of line accessories and insulators
GOST 12509-75: Carbide tipped counterbores. Technical requirements
GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications
GOST 12935-76: Free wheeling clutch of agricultural machines. Specifications
GOST 13297-86: Diamond cutting tools and inserts
GOST 1336-77: Thread milling cutters. Specifications
GOST 13537-68: Plastics. Method for determination of splitting resistance
GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications
GOST 13547-79: Butterfly valves for pnom up to 2.5 MPa (25 kgf/cm2)
GOST 13585-68: Steel. The bead method for determining the allowed welding and building procedures.
GOST 13838-68: Fine-module disk gear-milling cutters
GOST 13877-80: Sucker rods and couplings
GOST 13877-96: Sucker rods and sucker rod couplings. Specifications
GOST 13932-80: Combined arbor-type circular mills for woodcutting
GOST 13944-86: Retaining spring flat rings and grooves for them. Specifications
GOST 13995-78: Steel rustic tool. Specifications
GOST 14028-63: Optical length gauges
GOST 1405-83: Pinch and wrenching steel bars. Specifications
GOST 14117-85: Strip made from precision alloys for elastic elements
GOST 14229-78: Spring pins. Specification
GOST 14333-79: Rubber working mills. General specifications
GOST 1435-74: Non-alloyed tool steel. Specification
GOST 1435-90: Unalloyed tool steel bars, strips and coils
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 1452-2003: Screw cylindrical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
GOST 1452-2011: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
GOST 1452-69: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Technical requirements
GOST 1452-86: Screw cylindrical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
GOST 14901-93: Moulds for the manufacture of industrial rubber articles
GOST 14952-75: Combined centre drills. Specifications
GOST 14953-80: Taper countersinks
GOST 15127-83: Solid worm hobs for cutting of teeth on the sprockets for the driving roller chains and bush chains
GOST 1523-81: Straight reamers
GOST 1543-42: Cold rolled steel tooling belt
GOST 158-74: Knife sections ledger plates and knife backs for cutter bars of agricultural machines. Specifications
GOST 15987-91: Wooden bodied planes
GOST 16088-70: Solid carbide machine reamers. Specifications
GOST 16115-88: Diamond segment cut-off wheels of 1a1rss/c1 and1a1rss/c2 forms
GOST 16491-80: Keyway broaches
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 16556-2016: Ground connections for movable electric units. General specifications
GOST 16556-81: Grounding rods for mobile electrical equipment
GOST 16722-71: Shanks for dies of sheet pressing. Technical requirements
GOST 1677-75: Solid counterbores and high steel inserted blade counterbores. Technical requirements
GOST 1695-80: Solid shell-type face mills, side mills and slot mills
GOST 17024-2015: End mills. Specification
GOST 17024-82: End mills
GOST 17199-88: Fitter’s screwdrivers
GOST 17277-71: Solid carbide twist drills. Specifications
GOST 17315-71: Chipper knives. Technical conditions
GOST 17342-81: Knives for chipping machines
GOST 17392-72: Guide and supporting parts of plastics moulds and die casting dies. Technical requirements
GOST 17438-72: Pliers
GOST 17439-72: Adjustable pliers
GOST 17440-93: Sniper nose pliers
GOST 17574-72: Multiball hard differential rollers by diameters from 40 to 300 mm for dimension-finishing of openings of machine components by pressure. Technical requirements
GOST 1757-76: Hoes. Specification
GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods
GOST 1759.5-87: Nuts. Mechanical properties and test methods
GOST 1759-70: Bolts, screws, pins and nuts
GOST 1763-68: Steel. Methods for determination of decarbonised layer depth
GOST 18064-2016: Solid carbide boring tools with steel shank. Specifications
GOST 18064-72: Solid carbide boring tools with steel shank. Specifications
GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications
GOST 18126-72: Bolts, studs and nuts with thread diameter over 48 mm. Specifications
GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications
GOST 18336-73: Rigid cellular plastics. Method of test for modulus of elasticity
GOST 18372-73: Carbide end mills. Specifications
GOST 18435-73: Jig bushes. Technical requirements
GOST 18479-73: Planer-type circular saws for sawing of wood. Technical conditions
GOST 18572-2014: Rolling bearings. Axle box cylindrical roller bearings for rolling stock. Specification
GOST 18578-89: Builders axes. Specifications
GOST 18661-73: Steel. Method for measurement of hardness by shock indentation
GOST 18844-73: Non-slaving taps. Technical requirements
GOST 18886-73: Steel forms for the manufacture of reinforced concrete and concrete products. General technical requirements
GOST 18975-86: Knife for finishing works. Specification
GOST 18981-73: Pipe toggle wrenches
GOST 19126-2007: Medical metallic instruments. General specifications
GOST 19126-79: Metallic medical instruments
GOST 19147-82: Skiing sticks. Specifications
GOST 19259-73: Cutter for ceramic tiles
GOST 19265-73: Bars and strips out of high-speed steel. Specifications
GOST 19584-80: Units and replaceable parts of universal re-adjustable hammer dies for precision die forging by means of crank presses
GOST 19596-87: Spades
GOST 19598-74: Garden hoes, weeders and cultivators. Specifications
GOST 19598-95: Lawn-and-garden hoes, grub-axes and cultivators
GOST 19733-74: Pipe point opening socket wrenches
GOST 19826-74: Chain pipe tongs
GOST 19879-74: Carbide tipped machine taps for pipe cylindrical thread. Specifications
GOST 19946-74: Dies for casting of non-ferrous alloys. Specifications
GOST 19999-74: Wax-pattern dies. Specifications
GOST 20017-74: Sintered hard metals. Determination of Rockwell hardness
GOST 2037-82: Auger conveyors, stationary, general purpose. General specifications
GOST 20549-75: Vacuum diffusion welding of working elements of separating and shape forming dies. Typical technological process
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 21238-93: Surgical instruments-non-cutting, articulated instruments-general requirements and test methods
GOST 21239-93: Instruments for surgery. Scissors. General requirements and test methods
GOST 21240-89: Medical scalpels and knives
GOST 21305-75: Elements and assembly units for heated core boxes. Specifications
GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications
GOST 21345-78: Conical, ball and cylindrical cocks set at рnom of up to approx. 16 MPa ( 160 kgf/cm2)
GOST 21448-75: Alloyed powders for welding deposit. Specifications
GOST 21449-75: Rods for welding deposit. Specifications
GOST 21542-76: Carbide tipped counterbores for machining stainless and high-temperature steels and alloys. Specifications
GOST 21545-76: Solid carbide counterbores for machining stainless and high-temperature steels and alloys. Specifications
GOST 21546-88: Hammer dies for die forging
GOST 21643-2022: Medical staplers. General technical conditions
GOST 21643-82: Mechanical surgical suturing devices
GOST 21765-76: Self-opening threadcutting die heads with circular. Technical conditions
GOST 2176-77: High-alloy steel castings with special qualities. General specifications
GOST 21797-2014: Two-turn spring washers for railway track. Specifications
GOST 21797-76: Two-turn spring washers for railway track. Technical specifications
GOST 22053-76: Woodcutting twist drills with centre and undercutters. Specifications
GOST 22082-76: Injection mould bases, detail-blanks and details of injection moulds. Specifications
GOST 22253-76: Friction draft gears for 1520 mm gauge railway rolling stock. Specifications
GOST 22281-76: Plate conveyors, stationary, general purpose. Specification
GOST 22356-77: High strength bolts and nuts аnd washes. General specifications
GOST 22357-87: Figure skates. General specifications
GOST 22358-87: Racing and hockey skates. General specifications
GOST 22472-87: Dies for a sheet-metal stamping
GOST 2248-80: Flat thread-rolling dies
GOST 22696-2013: Rolling bearings. Cylindrical rollers. Specifications
GOST 22696-77: Rolling bearings. Short cylindrical rollers. Technical requirements
GOST 22703-91: Moulded pieces of automatic coupler equipment for 1520 mm gauge railway rolling stock. General specifications
GOST 22713-77: Cutting tools of high-speed steel for processing of plastics. Specification
GOST 22722-77: Tractor and combine diesel engines. Inlet and exhaust valves. General technical requirements
GOST 22749-77: Form-relieved milling cutters
GOST 2283-69: Steel cold rolled band from tool steel and spring steel
GOST 2284-43: Cold-rolled steel strip of engineering steel
GOST 2284-79: Cold-rolled carbon structural steel strip
GOST 2287-88: Flat thread chasers
GOST 2310-77: Steel bench hammers
GOST 23117-91: Semiautomatic grips for tensioning of the steel in prestressed concrete structures. Specifications
GOST 23157-78: Inserted washers for concrete ties. Specifications
GOST 23212-78: Units of versatile press tools for clipping. Specifications
GOST 23249-78: End cutters for use on NC machine tools for machining parts of high-resistant steels, titanium and light alloys. Specifications
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 23461-84: Diamond broach files
GOST 23522-79: Cold-rolled strip for hack saws. Specifications
GOST 23677-79: Hardness meters for metals
GOST 23870-79: Weldability of steels. Test method for evaluation of fusion welding effect on parent metal
GOST 2387-80: Steel ropes. Method endurance tester
GOST 23979-2018: Subs for casing and tubing. Specifications
GOST 24182-80: Open-hearth steel rails, P75, P65 and P50 types for wide gauge railways. Specifications
GOST 24296-80: Hardened cylindrical pins. Specifications
GOST 24320-2018: Utensils and covers of copper-nickel and copper-nickel-zinc alloys with silver or gold coating. General specifications
GOST 24320-80: Tableware made of cupronickel and nickel silver coated with silver or gold
GOST 24360-2016: Shell and mills with inserted carbide teeth. Specifications
GOST 24360-80: Shell-type face mills with inserted carbide teeth
GOST 24474-80: Marking tools
GOST 24580-81: Ballast from waste of asbestos production. Specification
GOST 24906-81: Gear-shaping cutter heads for straight bevel gears
GOST 25.602-80: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
GOST 2523-51: Steel electrodes for arc welding
GOST 25255-82: Rolling bearings. Long cylindrical rollers. Technical requirements
GOST 25556-82: Set screws. Mechanical properties and test methods
GOST 25573-82: Freight handling rope slings for construction
GOST 25594-83: Honing diamond bars
GOST 25605-83: Hand operated socket wrenches and drive parts
GOST 25698-83: Powder articles. Methods of determination of hardness
GOST 25698-98: Sintered metal materials, excluding hard metals. Determination of apparent hardness. Materials of essentially uniform section hardness
GOST 25727-83: Letter and digital hand stamps
GOST 25779-90: Toys. General safety requirements and control methods
GOST 25781-2018: Steel molds for the manufacture of reinforced concrete products. Technical specifications
GOST 25781-83: Steel moulds for reinforced concrete members. Specifications
GOST 25790-83: Hexagon socket wrenches
GOST 25926-90: Radionuclide ionising radiation sealed sources. Purability classes and test methods. Norms of degrees of rigidity under climatic and mechanical influences
GOST 26007-83: Strength calculations and tests. Methods of mechanical testing of metals
GOST 26215-84: Hand-held wood-saws
GOST 26258-87: Counterbores designed for working bearing surfaces under fastenings. Specifications
GOST 26405-84: Tools for manufacturing bolts and nuts using cold heading machines
GOST 26496-85: Hydraulic accumulators. Acceptance rules and test methods
GOST 26582-85: Food (manufacturing) industry machines and equipment
GOST 26596-2016: Face milling cutters with mechanically clamped indexable carbide inserts. Specifications
GOST 26596-91: Non-adjustable milling cutters
GOST 26613-2016: Lathe tools with mechanically clamped changeable indexable inserts. Specifications
GOST 26613-85: Lathe tools with mechanic fastening of replaceable faceted plates
GOST 26665-91: Metal bodied planes. Technical specifications
GOST 2679-2014: Slitting and cutting cutters. Specifications.
GOST 2679-93: Metal slitting and cutting-off saws
GOST 27274-87: Leather wringing machines
GOST 27358-87: Press moulds for manufacturing of plastic items
GOST 2744-79: Line accessories. Acceptance rules and methods of tests
GOST 27724-88: Drills with mechanical fixation of replaceable polyhedral plates
GOST 27962-88: Industrial equipment
GOST 28037-89: Wire cutters
GOST 28241-89: Hand wise. Specification.
GOST 28281-89: Side milling cutter for cutting of sprocket teeth for driving roller and sleeve-type chains
GOST 28300-2010: Cardan shafts of traction drive of diesel locomotives and diesel trains. General specifications
GOST 28393-89: PM bars and strips of high-speed steel. General specifications
GOST 28433-90: Retrievers
GOST 28434-90: Overhead travelling stacker cranes
GOST 28436-90: End mills with mechanically clamped insrtr tips
GOST 28438-90: Disk milling cutters with mechanically clamped many-sided hard-alloy inserts
GOST 28442-90: Broaches for cylindrical, slitting and polyhedral profile holes. Specifications
GOST 28648-90: Crane wheels
GOST 28709-90: Helical end mills with elongated body and hard-alloyed change inserts
GOST 28719-90: Shell-type helical-flute cylindrical face milling cutters with replaceable carbide inserts
GOST 29092-91: Cylindrical milling cutters
GOST 30352-96: Diamond grinding wheels for treatment of household and art glass
GOST 30415-96: Steel. Non-destructive testing of mechanical properties and microstructure of steel products by magnetic method
GOST 3057-90: Disk springs. Specifications
GOST 30630.1.10-2013: Test methods for resistance to mechanical external influencing factors for machines, instruments and other industrial products. Strikes on casing of device
GOST 30632-99: Brake block holder and key for 1520 mm main-line locomotives. General specifications
GOST 30698-2014: Tempered glass. Specifications.
GOST 30767-2002: Gas lift well use equipment. Safety requirements and test methods
GOST 30803-2002: Transmission tooth gears of the traction main railway stock . Specifications
GOST 30803-2014: Transmission tooth gears of the traction railway stock. Specifications
GOST 30826-2001: Laminated glass for building. Specifications
GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines
GOST 31.211.42-93: Elements and assembly units of detachable fixtures for assembly and welding
GOST 31294-2005: Direct-acting safety valves. General specifications
GOST 31443-2012: Steel pipes for crafts pipelines. Specifications
GOST 31462-2011: Safety windows. General specifications
GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments
GOST 32564.1-2013: Glass and glass products. Test method for resistance to ball drop
GOST 32564.2-2013: Glass and glass products. Test method for resistance to impact of hammer and axe
GOST 32583-2013: Stainless steel table and kitchen cutlery. General specifications
GOST 32696-2014: Steel drill pipes for oil and gas industry. Specifications.
GOST 32769-2014: Rolling bearings. Taper bearing unit for rolling stock axle boxes. Specification
GOST 32833-2014: Diamond cutting-off wheels. Specifications
GOST 33005-2014: Oil and gas industry. Drilling and production equipment. Connections of marine drilling risers. General specifications
GOST 33186-2014: Clamp of spring rod for mounting rails. Specifications
GOST 33187-2014: Disk springs for rail joints. Specifications
GOST 33189-2014: Transmission tooth gears of the traction railway stock. Scales of standards of macro- and microstructures
GOST 33258-2015: Pipeline valves. Surfacing and quality control of surfaced surfaces. Technical requirements
GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications
GOST 33529-2015: Band saws with cutting elements, welded stellate. Specification
GOST 33532-2015: Saws frame and tare with cutting elements, welded with stellate, for vertical sawmills. Specification
GOST 33722-2016: Switches of turnouts. General specifications
GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications
GOST 34075-2017: Brake block holder and key for railway rolling stock. General specifications
GOST 34117-2017: Cookware and tableware made of corrosion-resistant steel for children and teenagers. Technical conditions
GOST 34293-2017: Pipeline valves. Metal ball valves for petroleum, petrochemical and allied industries. General specifications
GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions
GOST 34385-2018: Axle-boxes and adapters for wheelsets of freight wagon bogies. General specifications
GOST 34473-2018: Pipe fittings. Cranes spherical steel all-welded for water thermal networks. General technical conditions
GOST 3449-84: Taps. Specifications
GOST 34610-2019: Pipe fittings. Electric drives. General specifications
GOST 34625-2019: Gear lever brake traction rolling stock. General specifications
GOST 34904-2022: Ship pipeline valves. General specifications
GOST 34936-2023: Articles of glazing of railway rolling stock. General technical specifications
GOST 3496-74: Knife clips and adjusting plafes for cutter bars of agricultural machines
GOST 3497-74: Wearing plates for cutter bars of agricultural machines
GOST 3608-78: Rings for ring spinning and ring doubling frames. Specifications
GOST 3722-2014: Rolling bearings. Steel balls. Specifications
GOST 3722-81: Rolling bearings. Balls. Technical requirements
GOST 4.446-86: System of product-quality indices. Measuring means for linear and angular measurements in mechanical engineering. Nomenclature of indices
GOST 4025-95: Domestic meat mincers. Specifications
GOST 4041-48: Hot-rolled thick-gauge high-quality carbon steel for automobile construction
GOST 4041-71: Rolled plates of high quality structural steel for cold stamping
GOST 4045-75: Hand-operated bench vice
GOST 4047-82: Rim saws for metal cutting
GOST 4229-94: Colter knives. Specifications
GOST 4230-93: Garden knives
GOST 4406-67: Rollers of carbide for glass cutters. Technical requirements
GOST 4727-83: Bearing wire
GOST 5.1650-72: ПРВН-53 device for plantage at vineyards. Quality requirements for certified production
GOST 5006-83: Toothed clutches. Specifications
GOST 5210-67: Rolled steel for files, rasps, chisels and cross-bits
GOST 5497-80: Cold-rolled steel strip for saws of cotton-scrubbing machines
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5524-75: Saws for vertical gang mills
GOST 5547-93: Engineer's and lineman's pliers. Specifications
GOST 5641-66: Prisms for testing and marking
GOST 5657-69: Steel. Methods for the determination of hardenability
GOST 5735-81: Carbide tipped machine reamers. Specifications
GOST 5756-81: Carbide tipped twist drills
GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications
GOST 5761-74: Valves for nominal pressure
GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications
GOST 5762-74: Pipeline industrial valves. Gate valves PN £ 250. General specifications
GOST 5808-77: Half-side and side-and-face milling cutters with inserted carbide blades. Techical specifications
GOST 5946-79: Conveyors, chain, suspension, load-carrying, general purpose. Specification
GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications
GOST 5950-51: Alloy tool steel. Specification
GOST 5950-63: Alloy tool steel. Grades and technical requirements
GOST 5950-73: Bars and strips from a toolhouse steel alloy
GOST 6086-75: Bits for drills. Technical requirements
GOST 6227-80: Taper-thread taps
GOST 6228-80: Round screw dies for taper thread
GOST 6396-78: Carbide-tipped keyway milling cutters. Specifications
GOST 6402-70: Lock washers. Specifications
GOST 6532-77: Band saws for sawing of wood. Specifications
GOST 6645-86: Hacksaw blades for metal cutting
GOST 6765-75: Hot rolled three-layer steel and wide steel strip (universal). Specifications
GOST 6870-81: Rolling bearings. Needle rollers. Specifications
GOST 6939-85: Marsh and bush-and-bog plaws
GOST 6939-93: Marsh and brush-and-bog ploughs. General specifications.
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7063-72: T-slot cutters. Specifications
GOST 7210-75: Hand-held metal-cutting shears
GOST 7211-86: Cold chisels
GOST 7212-74: Cape chisels
GOST 7213-72: Center punches
GOST 7214-72: Bench piercers
GOST 7236-93: Flat-nose pliers. Specifications
GOST 7275-75: Adjustable wrenches
GOST 7283-93: Round nose pliers. Specifications
GOST 7370-2015: Railway frogs. Specifications
GOST 7524-2015: Steel grinding balls for ball mills. Specifications.
GOST 7524-89: Steel grinding balls for the ball mills
GOST 7661-67: Dial depth gauges. Specifications
GOST 7918-75: Tool joints for 50 mm diameter drilling pipes. Specifications
GOST 8.335-2004: State system for ensuring the uniformity of measurements. Hardness standard blocks. Methods of verification
GOST 8.335-78: State system for ensuring the uniformity of measurements. Harness standard blocks. Methods and means of verification
GOST 801-2022: Rolled bearing steel. Technical conditions
GOST 801-78: Bearing steel. Specifications
GOST 8026-92: Levelling rules. Specifications
GOST 8034-76: Small spiral drills with diameter from 0,1 to 1,5 mm and thickened cylindrical tails. Specifications
GOST 808-70: Flattened steel strip for spiral rollers of bearings
GOST 8220-85: Underground fire hydrants. Specifications
GOST 8306-86: Electric hand planers. Specification
GOST 8543-71: Slotting relieved milling cutters. Specifications
GOST 8570-80: Disk shavers
GOST 868-82: Internal dial gauges graduated in 0,01 mm. Specifications
GOST 8693-2022: Metal pipes. Bordering test method
GOST 8693-80: Metal pipes. Method of flange testing
GOST 8694-2022: Metal pipes. Dispersion test method
GOST 8994-80: Wood-cutting cylindrical end milling cutters
GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications
GOST 9131-75: Safety valves lever-load flanged cast iron for Pd 1.6 MPa (16 kgf / cm2) and steel for Pd 2,5 MPa (25 kgf / cm2). Technical requirements
GOST 9140-2015: Slot drills with cylindrical, Morse taper and 7:24 taper shanks. Specifications
GOST 9140-78: Keyway cutters. Specifications
GOST 9305-2014: Profile convex, concave milling and corner rounding cutters. Specifications
GOST 9305-93: Convex and concave form half-round milling cutters and corner rounding cutters
GOST 9324-2015: Worm-type complete fine milling cutters for cylindrical gears with involute profile. Specification
GOST 9324-80: Finishing single-thread hobs for involute spur-wheels
GOST 9509-74: Scales and dosimeters. Knife-edges and bearings of steel. General requirements
GOST 9515-81: Piston metal rings for piston compressors. Specifications
GOST 9533-81: Trowels, tuck pointing tools. Specifications
GOST 9539-72: Thread rolls. Specifications
GOST 9650-80: Pins. Specifications
GOST 9740-71: Circular screw dies. Specifications
GOST 977-88: Steel castings. General specifications
GOST 980-80: Flat ring saws for wood sawing
GOST IEC 60061-4-2014: Lamp caps and cartridges for light sources with gauges for the control of interchangeability and safety. Part 4. Guidelines and general information
GOST ISO 10432-2014: Oil and gas industry. Downhole equipment. The downhole safety valve with accessories. General specifications
GOST ISO 13680-2016: Seamless casing, tubing and coupling stock from corrosion-resistant high-alloy steels and alloys for petroleum and natural gas industries. Specifications
GOST ISO 16070-2015: Oil and gas industry. Downhole equipment. Mounting mandrels and landing nipples. General technical requirements
GOST ISO 17078-1-2014: Oil and gas industry. Drilling and production equipment. Part 1. Mandrels for the removable valve. General specifications
GOST ISO 3183-2012: Steel pipes for pipelines of petroleum and natural gas industries. General specifications
GOST ISO 3183-2015: Steel pipes for pipelines of petroleum and natural gas industries. General specifications
GOST ISO 3506-1-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 1. Bolts, screws and studs
GOST ISO 3506-2-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 2. Nuts
GOST ISO 3506-3-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 3. Setting screws and similar fasteners not under tensile stress
GOST ISO 8319-1-2011: Orthopaedic instruments. Drive connections. Part 1. Keys for use with screws with hexagon socket heads
GOST ISO 8319-2-2011: Orthopaedic instruments. Drive connections. Part 2. Screwdrivers for single slot head screws, screws with cruciate slot and cross-recessed head screw
GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch
GOST ISO 898-2-2015: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread
GOST ISO 898-5-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 5. Setting screws and similar threaded fasteners of established classes of hardness with large and small thread pitch
GOST R 50.04.02-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing of heat treatment processes
GOST R 50.04.04-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for technologies of working procedures by pressure
GOST R 50072-92: Multiple slip joint pliers. Specifications
GOST R 50271-92: Prevailing torque type steel hexagon nuts. Mechanical and performance properties
GOST R 50300-92: Turning tools with indexable inserts of superhard materials. Specifications
GOST R 50302-92: Regrindale superhard material (composite) tipped cartridges for toolholders. Specifications
GOST R 50629-93: Special form radioactive material. General technical requirements and test methods
GOST R 50895-96: Toothed clutches. Specifications
GOST R 51015-97: Blades for household and special use. General specifications
GOST R 51016-97: Sets of carbon steel and aluminium alloys. General specifications
GOST R 51047-97: Cutters for shearers and entry-driving machines. General specifications
GOST R 51155-2017: Line accessories. Acceptance rules and test methods
GOST R 51155-98: Line accessories. Acceptance rules and methods of tests
GOST R 51161-2002: Sucker rods, mouth stocks and couplings for them. Specifications
GOST R 51175-98: Transmission tooth gears of the traction main railway stock. Specifications
GOST R 51178-98: Clips for ball-socket couplings of line hardware and insulators. Specifications
GOST R 51220-98: Transmission tooth gears of the traction main railway stock. Raw pieces. Technical specifications
GOST R 51245-99: Steel universal drill rods. General specifications
GOST R 51365-2009: Petroleum and natural gas industries. Drilling and production equipment. Wellhead and Christmas tree equipment. General specifications
GOST R 51365-99: Control head oil field equipment. General specifications
GOST R 51500-99: Hunting knives and daggers. General specifications
GOST R 51501-99: Tourist and special sport knives. General specifications
GOST R 51548-2000: Survival knives. General specifications
GOST R 51555-99: Toys. General safety requirements and methods of tests. Mechanical and physical properties
GOST R 51644-2000: Dressing and skinning knives. General specifications
GOST R 51681-2000: Pneumatic hammer drills. Drill steels. General technical requirements
GOST R 51682-2000: Casing and coring tubes for geology-exploring drilling. Specifications
GOST R 51687-2000: Stainless steel table and kitchen cutlery. General specifications
GOST R 51715-2001: Decorative and souvenir products similar in external structure to cold or throw or missile weapon. General technical requirements
GOST R 51895-2002: Cold blade weapon for bearing with the kazak uniform and national costumes of the peoples of the Russian Federation. General technical requirements. Test methods
GOST R 51970-2002: Ski-poles for walk and sport race skiing. Specifications
GOST R 52203-2004: Tubing and coupling. Specifications
GOST R 52627-2006: Bolts, screws and studs. Mechanical properties and test methods
GOST R 52628-2006: Nuts. Mechanical properties and test methods
GOST R 52630-2006: Steel welded vessels and apparatus. General specifications
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 52643-2006: High-strength screws and nuts washers for metal structures. General specifications
GOST R 52737-2007: Hunting hangers, tourist and skinning machetes, tools for repairing and saving works. General technical requirements and safety test methods
GOST R 52762-2007: Mechanical environment stability test methods for machines, instruments and other industrial products. Test methods for bumps to enclosure of products
GOST R 52786-2007: Hinge and pliers tools. Safety requirements and methods of test
GOST R 53004-2008: T-slot cutters. Specifications
GOST R 53374-2009: Liquid - propellant rocket engines. General technical requirements for production and quality inspection during supply for use
GOST R 53411-2009: Saw blades for metal cutting. Specifications
GOST R 53412-2009: Woodruff keyseat cutters. Specifications
GOST R 53443-2009: Motor vehicles. Piston pins of automobile engines. General technical requirements and methods of tests
GOST R 53444-2009: Motor vehicles. Crankshafts of engines. General technical requirements and methods of tests
GOST R 53557-2009: Motor vehicles. Connecting rod bolts. General technical requirements and methods of tests
GOST R 53580-2009: Steel pipes for crafts pipelines. Specifications
GOST R 53664-2009: High-strength cheese-head and conical bolts for bridge building. Nuts and washers for them. Specifications
GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications
GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications
GOST R 53678-2009: Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production. Part 2. Cracking-resistant carbon and low-alloy steels and the use of cast irons
GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments
GOST R 53772-2010: Reinforced steel low-relaxation 7-wire strands. Specifications
GOST R 53808-2010: Automobile engines. Camshafts. Technical requirements and test methods
GOST R 53818-2010: Vehicles. Wheel balancing weights. Technical requirements and test methods
GOST R 53836-2010: Automobile engines. Thin-walled liners of main and connecting rod bearings. Technical requirements and test methods
GOST R 53906-2010: Toys. General safety requirements and methods of tests. Mechanical and physical properties
GOST R 53925-2010: Pliers and nippers. General technical requirements, methods of control, tests
GOST R 53935-2010: Screwdrivers for fitting and assembling for recessed screws and wood screws. General technical requirements, methods of control and tests
GOST R 53961-2010: Fire-fighting equipment. Underground fire hydrants. General technical requirements. Test methods
GOST R 54156-2010: Table utensils made from stainless steel for children and teenagers. Specifications
GOST R 54171-2010: Laminated glass. Specifications
GOST R 54383-2011: Steel drill pipes for petroleum and natural gas industries. Specifications
GOST R 54391-2011: Utensils and covers from silver for children. Specifications
GOST R 54488-2011: Adjustable wrenches. Specifications
GOST R 54489-2011: Circular saws for cutting logs machines and automatic lines. General technical requirements
GOST R 54490-2011: Superhard tipped circular saws for machining wood materials and plastics. General specifications
GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.
GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions
GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST R 55432-2013: Turn blades for machining wood materials and plastics. Technical requirements
GOST R 55511-2013: Pipeline valves. Electric actuators. General specifications
GOST R 55735-2013: Mining equipment. High pressure mine rubber hoses with metallic tapings and metallic braidings with fitting. Safety requirements and test methods
GOST R 55819-2013: Brake block holder and key for railway rolling stock. General specifications
GOST R 55850-2013: Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift. Part 2. Surface-drive systems. General technical requirements
GOST R 55951-2014: Modified wood. Method for determining the wear resistance and friction coefficient
GOST R 56299-2014: Rolled products from bearing steel. Specifications
GOST R 56439-2015: Sets of frame and awning shelters for sports grounds. General requirements
GOST R 56445-2015: Strength training equipment. General safety requirements and test methods
GOST R 56445-2021: Stationary simulators. General safety requirements and test methods
GOST R 56655-2015: Polymer composites. Method for determination of in-plane shear strength of pultruded glass–reinforced plastic rods
GOST R 56772-2015: Polymer composites. Method for determination static energy absorption properties of honeycomb sandwich core materials
GOST R 56794-2015: Polymer composites. Method for determination of damage resistance to concentrated quasi-static indentation force
GOST R 57167-2016: Ice skates. Safety requirements and test methods
GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure
GOST R 57410-2017: Unified system of corrosion and ageing protection. Corrosion protection of wares from non-ferrous metal alloys by diffusion treatment with zinc. General requirements for flow process
GOST R 57411-2017: Unified system of corrosion and ageing protection. Corrosion protection of parts made of cast iron or steels by diffusion processing of zinc. General requirements to flow process
GOST R 57419-2017: Unified system of corrosion and ageing protection. Corrosion protection of parts made of super high and high-strength steels by diffusion treatment with zinc. General requirements for flow process
GOST R 57732-2017: Polymer composites. Determination of strength of adhesive bonded joints using a bending-shear method
GOST R 57981-2017: Hexagon socket screw keys. Specifications
GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements
GOST R 58195-2018: Internal combustion engines. Piston pins. Part 2. Inspection measuring principles
GOST R 58201-2018: Mining drilling for pneumatic and hydraulic anchorage installers. General specifications
GOST R 58317-2018: Weightlifting bars. Safety Requirements and Test Methods
GOST R 58336-2018: Anchor angles. Test methods
GOST R 58419-2019: Additive technology. Products made of titanium alloys made by selective electron beam fusion. General specifications
GOST R 58515-2019: Trowel, shovels and cuts. Technical conditions
GOST R 58518-2019: Steel construction hammers. Technical conditions
GOST R 58753-2019: Cargo rope slings for construction. Technical specifications
GOST R 58867-2020: Instrument rolling bearings. Methods for measuring the hardness of bearing parts
GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications
GOST R 70352-2022: Fittings for overhead power lines up to 1 kV with self-supporting insulated wires. General specifications
GOST R 70399-2022: Bird protection devices at electric power industry facilities. General technical conditions
GOST R 70532-2022: Cutters with tungsten carbide inserts for machining T-slots. Specifications
GOST R 70533-2022: Key cutters equipped with tungsten carbide plates. Specifications
GOST R 70600-2022: Pole for alpine and cross-country skiing. Requirements and test methods
GOST R 8.977-2019: State system for ensuring the uniformity of measurements. Standard hardness measures. Verification Method
GOST R ISO 11749-2017: Drive V-ribbed belts for the automobiles. Fatigue test
GOST R ISO 13533-2013: Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment. General technical requirements
GOST R ISO 13680-2011: Seamless casing, tubing and coupling stock from corrosion-resistant high-alloy steels and alloys for petroleum and natural gas industries. Specifications
GOST R ISO 17078-3-2013: Petroleum and natural gas industries. Drilling and production equipment. Part 3. Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels. General technical requirements
GOST R ISO 22034-1-2013: Steel wire and wire products. Part 1. General test methods
GOST R ISO 2320-2009: Prevailing torque type steel nuts - Mechanical and performance properties
GOST R ISO 3183-2009: Steel pipes for pipelines of petroleum and natural gas industries. General specifications
GOST R ISO 3183-2-2007: Steel pipes for pipelines. Specifications. Part 2. Requirements for class B pipes
GOST R ISO 3183-3-2007: Steel pipes for pipelines. Specifications. Part 3. Requirements for class C pipes
GOST R ISO 3506-1-2009: Mechanical properties of corrosion-resistant stainless steel fasteners. Part 1. Bolts, screws and studs
GOST R ISO 3506-2-2009: Mechanical properties of corrosion-resistant stainless steel fasteners Part 2. Nuts
GOST R ISO 3506-3-2009: Mechanical properties of corrosion-resistant stainless steel fasteners. Part 3. Set screws and similar fasteners not under tensile stress
GOST R ISO 5287-2017: Drive V-belts of narrow cross-sections for the automobiles. Fatigue test
GOST R ISO 7331-2002: Ski-poles for alpine skiing. Safety requirements and test methods
GOST R ISO 7331-2017: Ski-poles for alpine skiing. Safety requirements and test methods
GOST R ISO 8319-1-2006: Orthopaedic instruments. Drive connections. Part 1. Keys for use with screws with hexagon socket heads
GOST R ISO 8319-2-2006: Orthopaedic instruments. Drive connections. Part 2. Screwdrivers for single slot head screws, screws with cruciate slot and cross-recessed head screws
GOST R ISO 898-1-2011: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1. Bolts, screws and studs of specified property classes with coarse thread and fine pitch thread
GOST R ISO 898-2-2013: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread
GOST R ISO 898-5-2009: Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses
I 1.2.1.02.019.1121-2016: Determination of mechanical properties of metal of equipment of nuclear power plants by means of non-reference technique in terms of hardness characteristics. Instructions
MDS 12-56.2010: Wire rope slings for construction. Recommendations for compilation of technical specifications
MI 1382-86: Guidelines. Protractor pendulum. Type ZURI-M. Method of verification
MI 1585-86: Guidelines. GSE. Device type 2URI. Method of verification
MI 2006-89: State system for ensuring uniformity of measurements. Depth gauge indicators. Verification procedure
NB ZhT TsT 023-2001: Shaft cardan main drive diesel locomotives and diesel trains. Safety standards
NB ZhT TsT-TsV-TsL 012-2003: Axle rolling bearings for rolling stock of railways. Safety standards
NB ZhT TsV-TsL 014-2003: Axle rolling bearings for rolling stock of railways. Safety standards
ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
OST 108.004.10-86: Quality control program of nuclear energetics products.
OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.
OST 108.958.04-85: General-purpose forgings for turbines and compressors. Specification.
OST 16.3.949.003-75: Electric welding equipment. Automatic and semi-automatic arc welding. The rollers giving. Design, dimensions and specifications
OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.
OST 26-07-1419-76: Forgings, stampings and blanks of rolled metal for pipeline fittings.
OST 26-07-2028-81: Surfacing the sealing surfaces of pipe with Э-20Х13type electrodes. Technical requirements.
OST 26-07-262-77: Studs, bolts, screws, nuts for piping fittings. General technical requirements (restriction as per GOST 20700-75, GOST 1759-70, GOST 18126-72).
OST 26-07-790-73: Devices for control of pipeline armature. General specifications.
OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements
OST 3-1686-90: Billets made of structural steel for engineering. General Specifications.
OST 32.156-2000: Spring bar terminals for fastening rails. Specifications (with Amendment No. 1)
OST 34-13-910-86: Cargo rope slings for construction. Technical conditions
OST 35-02-72: High-strength bolts, nuts and washers for them.
OST 37.001.045-82: Thin-walled main and connecting rod bearings of automobile engines. General Specifications.
OST 3-98-80: Constructional and spring refining steel. Technical requirements.
OST 4.054.035-78: Spring elements from alloys of ferrous and non-ferrous metals. Heat treatment. Typical Processes
OST 95-10-72: Billets made of corrosion-resistant steels of 12Х13, 20Х13, 30Х13, 40Х13, 95Х18, 14Х17Н2, 07Х16Н4Б and 07Х16Н4Б-Ш types.
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
PNST 14-2012: Machine nanostructured springs. Specifications
PNST 605-2022: Oil and gas industry. Underwater production systems. Teleoperated unmanned underwater vehicles tools and their interfaces
PNST 674-2022: Oil and gas industry. Underwater production systems. Chambers for launching and receiving means of cleaning and diagnostics of pipelines. General specifications
PNST 683-2023: Oil and gas industry. Underwater production systems. Tubes from austenitic-ferritic corrosion-resistant steel. Technical specifications
PNST 692-2022: Oil and gas industry. Underwater production systems. Wellhead equipment. Plugging module
R 4.054.004-89: Details from alloys of ferrous and non-ferrous metals. Thermal and chemical-thermal treatment. Typical Processes
R 4.054.103-89: Instrument parts are precision metal. Stabilization of sizes by heat treatment. Typical Processes
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
RD 26-17-086-88: Weld joints. Quality control of heat treatment equipment
RD 2730.300.06-98: Fixtures for nuclear plants and thermal stations. Cladding of sealing surfaces. Specifications
RD 34.17.427-89: Procedural Guidelines. Nondestructive Testing at Thermal Power Stations. General Requirements
RD 50-460-84: Guidelines. Ensuring the durability of products. Method for experimental evaluation of plasticity of the surface layers of machine parts
RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RST RSFSR 605-89: Folding knives. General technical conditions
RST RSFSR 656-81: Apparatus for processing vegetables and fruits. Technical conditions
SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel
ST CKBA 125-2020: Pipe fittings. Types of control and testing
ST RK 1416-2005: Macro- and micro-structures of cog wheels of tractive transmissions of traction rolling stock. Evaluation scales and control procedure
ST RK 1677-2007: Resilient rail fasteners with resilient terminals of SKL 12 (with cushions) and SKL 14 (no cushions) types. Specification
ST SSFZhT TsT 046-99: Shaft cardan main drive diesel locomotives and diesel trains. Typical test method
ST SSFZhT TsT TsL TsV-137-2002: Rolling stock of mainline railways. Axle box rolling bearings. Standard testing method.
ST SSFZhT TsT-121-2001: Cylindrical cogged wheels of traction gearing of traction rolling stock of main railway lines. Standard testing method
ST SSFZhT TsT-TsV-TsL 084-2000: Rolling stock of railways. Springs cylindrical screw carriages. Typical test method.
ST TsKBA 006-2003: Pipe fittings. Cryogenic fittings. General technical conditions
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants
ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions
ST TsKBA 088-2010: Pipe fittings. The quality control program of valves used for hydrogen sulfide environments
ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions
ST TsKBA 091-2011: Pipe fittings. Determination of mechanical properties of steel based on hardness measurement
ST TsKBA 098-2011: Pipe fittings. Repair of surfacing. Technical requirements
ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual
STB 813-93: Scissors. General specifications
TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures
TU 035-178-86: Saws disk for pieces of pipes and bent profiles. Technical conditions for the experimental batch
TU 108.11.853-87: Procurement of parts from purchased long products
TU 1317-006.1-593377520-2003: Steel seamless oil and gas pipelines of increased operational reliability for the field construction of TNK OJSC
TU 14-162-14-96: Seamless hot-deformed oil and gas pipes of increased corrosion resistance and cold resistance. Technical conditions
TU 14-4-1731-92: Dowel-nails with zinc coated washers. Technical conditions
TU 1462-203-0147016-01: Welding steel connection parts for operation in oil-field environments with increased corrosion activity. Technical conditions
TU 1468-010-593377520-2003: Seamless steel welded joints for pipelines, of increased operational reliability, intended for the field construction of OAO TNK
TU 2-034-439-88: Prisms testing and marking with one prismatic recess and overlay type P1
TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs
TU 34-38-20409-94: Pulse-safety devices Chekhov factory of power engineering. General technical conditions for major repairs
Customers Who Viewed This Item Also Viewed:
 |
Fastening parts for detachable connections of nuclear power plants. Specifications.
Language: English |
Environment. Water quality. Waste water to supply to the sewerage system. General requirements
Language: English |
Hot-rolled sheet. Range
Language: English |
Unified system for design documentation. Specifications
Language: English |
Electomagnetic compatibility of technical equipment. Railway systems and equipment. Part 3-1. Railway rolling stock. Requirements and test methods
Language: English |
The liquids for electronic nicotine delivery systems. General specifications
Language: English |
Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions
Language: English |
Metals. Method for testing the impact strength at the low, room and high temperature
Language: English |
Carbon structural quality steel gauged bars with special surface finish. General specifications
Language: English |
Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
Language: English |
Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.
Language: English |
Slotters. Standards of accuracy and rigidity
Language: English |
Crane rails. Specifications
Language: English |
Construction in seismic regions
Language: English |
Loads and impacts
Language: English |
Cocoa-powder. Specifications
Language: English |
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.