GOST 23360-78
ГОСТ 23360-78
|
|
Basic norms of interchangeability. Keys couplings with prismatic Keys. Keys dimensions and Keyways sections. Limits and fits
Основные нормы взаимозаменяемости. Соединения шпоночные с призматическими шпонками. Размеры шпонок и сечений пазов. Допуски и посадки
Status: Effective. The limitation of effectiveness has been lifted: Decree of the State Standard No. 1268 of 05.23.90
The standard applies to keyed connections with prismatic keys and establishes the dimensions and maximum deviations of the sizes of prismatic keys and their corresponding keyways on shafts and in bushings.
Стандарт распространяется на шпоночные соединения с призматическими шпонками и устанавливает размеры и предельные отклонения размеров призматических шпонок и соответствующих им шпоночных пазов на валах и во втулках.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
11/17/1978
SKU: RUSS54428
The Product is Contained in the Following Classifiers:
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.1 General design issues piping valves (TPA) »
8.1.2 Interchangeability and other design requirements »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.120 Shafts and couplings »
21.120.30 Splines, keyways, splines »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.120 Shafts and couplings »
21.120.30 Splines, keyways, splines »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G14 Keyed, slotted and wedge connections »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Detachable connections (threads, keys, splines, etc.) »
As a Replacement Of:
GOST 8788-68: Prismatic keys. Dimensions of keys and keyways
GOST 8789-68: Prismatic keys. Dimensions
The Document References:
GOST 24109-80: Gauges for keyed joints. Tolerances
GOST 24110-80: Keyway plug gauges with diameter from 9 to 18 mm. Design and dimensions
GOST 24111-80: Keyway plug gauges with diameter over 18 to 56 mm. Design and dimensions
GOST 24112-80: Keyway plug gauges with diameter over 56 to 125 mm. Design and dimensions
GOST 24113-80: Key-slotted prism gauges for shafts with diameter over 8 to 22 mm. Design and dimensions
GOST 24114-80: Keyway prism gauges for shafts with diameter over 22 to 200 mm. Design and dimensions
GOST 24115-80: Keyway depth gauges for holes with diameter from 3 to 10 mm. Design and dimensions
GOST 24116-80: Keyway depth gauges for holes with diameter over 10 to 90 mm. Design and dimensions
GOST 24117-80: Keyway depth gauges for holes with diameter over 90 to 200 mm. Design and dimensions
GOST 24118-80: Keyway depth gauges for shafts with diameter from 6 to 200 mm. Design and dimensions
GOST 24120-80: Keyway gauges for dimensions from 1 to 3 mm. Design and dimensions
GOST 24121-80: Keyway gauges for dimensions over 3 to 50 mm. Design and dimensions
GOST 6636-69: Standard linear dimensions
GOST 8787-68: Cold-drawn steel for rectangular parallel keys. Assortment
The Document is Referenced By:
ATK 24.201.17-90: Stirrers. Types, parameters, design, main dimensions and technical requirements
GOST 10748-79: Basic norms of interchangeability. Keyed joints with prismatic high keys. Dimensions of keys and keyways. Tolerances and fits
GOST 12080-66: Cylindrical ends of the shafts
GOST 12081-72: 1:10 Conical shaft ends. Basis dimensions. Permissible torque
GOST 12935-76: Free wheeling clutch of agricultural machines. Specifications
GOST 13876-87: Spindle noses for modular type machines. Basic dimensions
GOST 14084-76: Elastic clutches with sprocket wheel. Design. Basic parameters and dimensions
GOST 15069-75: Tool holders with straight guide and Morse taper shank for horizontal milling machines. Design and dimensions
GOST 15070-75: Tool holders with supporting bush and Morse taper shank for horizontal milling machines. Design and dimensions
GOST 15620-77: Overload claw clutches for general industrial practice. Main data and dimensions
GOST 15620-93: Safety jaw clutch couplings. Parameters and dimensions
GOST 15622-77: Slipping clutches. Main parameters and dimensions
GOST 15622-96: Safety slipping couplings. Parameters, design and dimensions
GOST 16257-70: Chill moulds. Rack core removers. Construction and dimensions
GOST 16340-70: Support holders for 1000 and 2000 kg force rolling heads. Construction and dimensions
GOST 16341-70: Support holder for a 4000 kg force rolling head. Construction and dimensions
GOST 16463-2016: Solid carbide keyway cutters. Specifications
GOST 16491-80: Keyway broaches
GOST 17662-72: Units for changeable sheet stamping cutting dies with diagonally-positioned guide posts. Construction and dimensions
GOST 18217-90: Key broaches. Design
GOST 18218-90: Thick cored key broaches. Design
GOST 18219-90: Flat teeth key broaches. Design
GOST 18220-90: Key broaches for higher class roughness. Design
GOST 20506-75: Pivoting arbours for shell reamers for turret lathes. Design and dimensions
GOST 20720-81: Cam disk couplings. Basic parameters. Overall and attachment dimensions
GOST 20720-93: Double-slider couplings. Parameters and dimensions
GOST 20742-81: Single chain couplings. Main data. Dimensions
GOST 20742-93: Chain couplings. Parameters and dimensions
GOST 20761-80: Flange couplings. Main data. Dimensions
GOST 20761-96: Flange couplings. Parameters, design and dimensions
GOST 20884-82: Elastic couplings with a toroid-shape shell. Basic parameters, overall and attachment dimensions
GOST 21186-91: Boring spindle units for modular-type machine tools. Basic dimensions. Standards of accuracy and rigidity
GOST 21191-91: Drilling spindle units for modular-type machine tools. Basic dimensions. Standards of accuracy
GOST 21233-75: Floating arbors for shell reamers with 7:24 taper shank for drilling and boring machines. Design and dimensions
GOST 21424-93: Flexible couplings with rubber-bushed studs. Parameters and dimensions
GOST 22410-91: Milling spindle units for modular-type machine tools. Basic dimensions. Standards of accuracy and rigidity
GOST 2323-76: Noses of grinding spindles with outside taper. Coupling dimensions
GOST 24109-80: Gauges for keyed joints. Tolerances
GOST 24110-80: Keyway plug gauges with diameter from 9 to 18 mm. Design and dimensions
GOST 24111-80: Keyway plug gauges with diameter over 18 to 56 mm. Design and dimensions
GOST 24112-80: Keyway plug gauges with diameter over 56 to 125 mm. Design and dimensions
GOST 24113-80: Key-slotted prism gauges for shafts with diameter over 8 to 22 mm. Design and dimensions
GOST 24114-80: Keyway prism gauges for shafts with diameter over 22 to 200 mm. Design and dimensions
GOST 24115-80: Keyway depth gauges for holes with diameter from 3 to 10 mm. Design and dimensions
GOST 24116-80: Keyway depth gauges for holes with diameter over 10 to 90 mm. Design and dimensions
GOST 24117-80: Keyway depth gauges for holes with diameter over 90 to 200 mm. Design and dimensions
GOST 24118-80: Keyway depth gauges for shafts with diameter from 6 to 200 mm. Design and dimensions
GOST 24120-80: Keyway gauges for dimensions from 1 to 3 mm. Design and dimensions
GOST 24121-80: Keyway gauges for dimensions over 3 to 50 mm. Design and dimensions
GOST 24246-80: Box clutches. Basic parameters. Design and dimensions
GOST 24246-96: Box clutches. Parameters, design and dimensions
GOST 24266-94: Reducers and motor-reducers shaft ends. Basic dimensions, allowable torques
GOST 24915-81: Three-phase asynchronous motors. Voltage 6000 V. Power from 200 to 1000 kW. Power ranges and mounting dimensions
GOST 25021-81: Disk flexible couplings. Main data and dimensions
GOST 25021-93: Disk flexible couplings. Parameters and dimensions
GOST 26455-85: Semifixed disk couplings. Main parameters and dimensions
GOST 26455-97: Semifixed disk couplings. Parameters, design and dimensions
GOST 27053-86: Metal-cutting machine tools with programmed numerical control. Adjustable reducing bushings with internal morse cone and plain shank
GOST 28119-89: Building-block machines. Adapters and adjustable bushes and locking nuts. Design
GOST 29175-91: Thin parallel keys and their corresponding keyways. Dimensions and tolerances
GOST 32601-2022: Centrifugal pumps for oil, petrochemical and gas industry. General technical requirements
GOST 32832.1-2014: Mandrels with a longitudinal key and guided cut for Shaft cutters. Part 1. The main dimensions
GOST 32832.2-2014: Mandrels with HSK hollow taper shank for milling Shaft cutters. Part 2. Dimensions and notation
GOST 32832.3-2014: Mandrels with taper 7:24 for Shaft cutters for automatic tool changing. Part 3. Dimensions and notation
GOST 32832.4-2014: Mandrels with taper 7:24 for Shaft cutters for manual tool changing. Part 4. Dimensions and notation
GOST 3564-84: Multioutlet oil-lubricating plants. Specifications
GOST 5006-83: Toothed clutches. Specifications
GOST 6396-78: Carbide-tipped keyway milling cutters. Specifications
GOST 8543-71: Slotting relieved milling cutters. Specifications
GOST 8838-81: Shaftline conical joints. Types, construction and dimensions
GOST 9061-68: Round eccentric cams for machine retaining devices. Design
GOST 9140-2015: Slot drills with cylindrical, Morse taper and 7:24 taper shanks. Specifications
GOST 9140-78: Keyway cutters. Specifications
GOST R 50892-96: Elastic couplings with a toroid-shape shell. Specifications
GOST R 50893-96: Safety bool clutches. Basic parameters and dimensions. Technical requirements
GOST R 50894-96: Star elastic clutches. Specifications
GOST R 50895-96: Toothed clutches. Specifications
GOST R 53003-2008: Slot drills with cylindrical, Morse taper and 7:24 taper shanks. Specifications
GOST R 54806-2011: Centrifugal pumps. Technical specifications. Class I
GOST R 70533-2022: Key cutters equipped with tungsten carbide plates. Specifications
OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.
RD 05-335-99: Requirements for the manufacture of mine electrical equipment with a voltage of 1140 V
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.
RM 38.14.008-94: Guiding Material. Radial (centrifugal) and axial fans. Maintenance and repair.
RTM 24-85: Information index of state, republican and industry standards, technical specifications for materials and products used in the design of furnaces and dryers
TU 34-38-20197-94: Valves for steam and water DN 10, 20, 40, 50, 65 mm Chekhov factory of power engineering. Technical conditions for major repairs
TU 34-38-20310-96: Centrifugal multistage sectional pumps CNS 180-85 ... 425. Technical conditions for repair
TU 34-38-20395-95: Fans VDN-32B, VDN-28, VDN-26, VDN-24, VDN-22, VDN-20, VDN-18. Technical conditions for major repairs
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.