GOST 15173-70
ГОСТ 15173-70
|
|
Plastics. Method for determination of mean coefficient of linear thermal expansion
Пластмассы. Метод определения среднего коэффициента линейного теплового расширения
Status: Effective. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)
The standard applies to plastics and establishes a method for determining their average linear thermal expansion coefficient. The method involves the determination of linear thermal expansion, not associated with changes in size during heating due to changes in moisture content, curing, loss of plasticizer or solvent, removal of internal stresses and other factors, and therefore is approximate.
Стандарт распространяется на пластмассы и устанавливает метод определения их среднего коэффициента линейного теплового расширения. Метод предусматривает определение линейного теплового расширения, не связанного с изменением размеров при нагреве вследствие изменения содержания влаги, отверждения, потери пластификатора или растворителя, снятия внутренних напряжений и других факторов, и поэтому является приближенным.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Committee of Standards, Measures and Measuring Instruments under the Council of Ministers of the USSR,
1/13/1970
SKU: RUSS54449
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
83 Rubber, technical rubber, asbestos and plastic industries »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.2 Testing of manufacturing products »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.1 Products of main chemical industries »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.080 Plastics »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.080 Plastics »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.080 Plastics »
83.080.01 Plastics in general »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.080 Plastics »
83.080.01 Plastics in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L29 Test methods. Packaging. Marking »
National Standards for OKSTU »
POLYMERS, PLASTIC MASSES, CHEMICAL FIBERS AND RUBBERS »
Control methods (testing, analysis, measurements) »
The Document References:
GOST 12021-75: Plastics and ebonite. Method for determining the softening point at bending
The Document is Referenced By:
GOST 10589-2016: Moulding polyamide 610. Specifications
GOST 12271-76: The copolymers of styrene. Specifications
GOST 22685-77: Forms for making control samples of concrete. Specification
GOST 25246-82: Chemically resistant concretes. Specifications
GOST 25645.331-91: Polymeric materials. Requirements for radiation resistance estimation
GOST 30535-97: Polymeric adhesives. Nomenclature of indices
GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works
GOST 32661-2014: Fibrе reinforced thermosetting plastic pipes and parts of pipelines. General specifications
GOST 9.711-85: Uniform system of protection against corrosion and ageing. Polymeric materials for the products, working in the conditions of radiation ageing. General requirements to selection.
GOST 9784-75: Organic sheet glass for illuminating engineering. Specifications
GOST R 50583-93: Polymer composites. List of properties
GOST R 54072-2010: Space technology. Polymer composites. List of properties
GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications
GOST R 54928-2012: Pedestrian bridges for polymer composites. Specifications
GOST R 55068-2012: Glass-fibre and basalt-fibre reinforced epoxy plastic pipes and parts of pipelines. Specifications
GOST R 56207-2014: Slabs and tiles of engineered stone on the basis of natural quartz. Specifications
GOST R 56209-2014: Rods composite polymer for the manufacture of cores uninsulated wires. Specifications
GOST R 56712-2015: Panel multilayer polycarbonate. Specifications
GOST R 57863-2017: Polymer composites. Reinforced thermoplastic sheets. General technical requirements and test methods
GOST R 57910-2017: Materials for additive process. Control and tests methods
GOST R 57921-2017: Polymer composites. Test methods. General requirements
GOST R 58895-2020: Concrete is chemically resistant. Specifications
ODM 218.2.058-2019: Recommendations on the use of composite materials in the construction of bridge structures and pedestrian bridges
ODM 218.2.076-2019: Recommendations on the use of composite structures for areas with extreme temperature conditions (below minus 40 degrees Celsius and above plus 40 degrees Celsius)
ODM 218.3.046-2015: Recommendations about technology of repair of water throughput pipes with use of composite materials
ODM 218.5.007-2008: Guidelines for the installation of vertical markings on metal barrier fences using protective plastic panels
OSN-APK 2.10.06.001-04: Instructions for the installation of plastic pipelines at the objects of the agroindustrial complex of Russia
RD 31.52.08-81: Caprolon steering gear bearings. Technological requirements for the manufacture and installation of ship repair
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg
RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg
SP 164.1325800.2014: Strengthening of reinforced concrete structures by FRP composites. Rules for design
SP 40-101-96: Design and installation of pipelines made of polypropylene "Random copolymer"
TR 75-98: Guide to Good Practice for the Design and Installation of Underground Communications Ducts Made of Plastic Pipes
TU 6-06-19-88: Parts and blanks from polyimide press materials
VSP 32-02-03 MO RF: Rules for the production and acceptance of work in the repair of rigid airfield pavements
|
Customers Who Viewed This Item Also Viewed:
 |
Tight and slack wooden barrels
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Software for measuring instruments. Procedure for of certification. General provisions
Language: English |
Current transformers. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.