GOST R 12.2.144-2005
ГОСТ Р 12.2.144-2005
|
|
Occupational safety standards system. Fire-fighting technics. Safety requirements. Test methods
Система стандартов безопасности труда. Автомобили пожарные. Требования безопасности. Методы испытаний
Status: Not effective - Canceled. Information about the registration of 650-st from 09/25/2018 (official site of Rosstandart); IUS 12-2018
The standard applies to fire trucks built on various wheeled chassis designed to extinguish fires and conduct rescue operations, and establishes structural and operational safety requirements for them and methods for monitoring compliance with these requirements. The standard should be applied in the manufacture of new, upgraded commercially available PA.
Стандарт распространяется на пожарные автомобили, создаваемые на различных колесных шасси, предназначенные для тушения пожаров и проведения аварийно-спасательных работ, и устанавливает требования конструкционной, эксплуатационной безопасности к ним и методам контроля за выполнением этихтребований. Стандарт должен применяться при изготовлении новых, модернизации серийно выпускаемых ПА.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
3/11/2005
SKU: RUSS54537
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
018/2011 TR CU. On safety of wheeled vehicles »
Regulations and standards (to 018/2011 TR CU) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
3 Fire safety equipment »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.9 Operation of vehicles »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.1 Motor vehicles and equipment »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.10 Fire fighting »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.10 Fire fighting »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
National Standards for OKSTU »
CONSTRUCTION, ROAD AND UTILITY ENGINEERING PRODUCTS »
Fire fighting equipment »
The Document References:
GOST 10908-75: Mechanical quadrants with level. Specifications
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements
GOST 12.2.040-79: Positive-displacement hydraulic drives and lubricating systems. General safety requirements for construction
GOST 12.3.001-85: System of labor safety standards pneumatic drives
GOST 12.4.123-83: Occupational safety standard system. Means of collective protection against infra-red radiation. General technical requirements
GOST 14192-96: Cargo marking
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16556-81: Grounding rods for mobile electrical equipment
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 21752-76: Man-machine system Control hand wheels and steering wheels General ergonomic requirements
GOST 21753-76: Man -machine system control levers
GOST 25076-81: Nonmetallic materials for interior trim of motor vehicles. Method of flammability determination
GOST 28433-90: Retrievers
GOST 28443-90: Uniform provisions concerning the approval of vehicles with regard to latches and door retention components
GOST 30593-97: Motor vehicles. Heating, ventilation and air conditioning systems. Requirements for effeciency and safety
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 7328-2001: Weights. General specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8.568-99: State system for ensuring the uniformity of measurements. Standard platinum resistance thermometers of the first and second grades. Methods of calibration
GOST 8769-75: Outer lighting devices for automobiles, buses, trolleybuses, tractors, trailers and semitrailers
GOST R 1.0-92: State system for standardization of the Russian Federation. Basic principles
GOST R 1.2-92: State system for standardization of the Russian Federation. Procedure for developing state standards
GOST R 41.11-2001: Uniform provisions concerning the type approval of vehicles with regard to door latches and door retention components
GOST R 41.13-99: Uniform provisions concerning the approval of vehicles of categories M, N and O with regard to braking
GOST R 41.21-99: Uniform provisions concerning the approval of vehicles with regard to their interior fittings
GOST R 41.23-99: Uniform provisions concerning the approval of reversing lights for power-driven vehicles and their trailers
GOST R 41.24-2003: Uniform provisions concerning: I. The approval of compression ignition (C.I.) engines with regard to the emission of visible pollutants; I1. The approval of motor vehicles with regard to the installation of C.1. engines of an approved type; III. The approval of motor vehicles equipped with C.I. engines with regard to the emission of visible pollutants by the engine; IV. The measurement of power of engines
GOST R 41.29-99: Uniform provisions concerning the approval of vehicles with regard to the protection of the occupants of the cab of a commercial vehicle
GOST R 41.34-2001: Uniform provisions concerning the type approval of vehicles with regard to the prevention of fire risks
GOST R 41.3-99: Uniform provisions, concerning the approval of retro-reflecting devices for power-driven vehicles and their trailers
GOST R 41.42-99: Uniform provisions concerning the approval of vehicles with regard to their front and rear protective devices (bumpers, etc.)
GOST R 41.43-99: Uniform provisions concerning the approval of safety glazing and glazing material
GOST R 41.46-99: Uniform provisions concerning the approval of rear-view mirrors, and of motor vehicles with regard to the installation of rear-view mirrors
GOST R 41.48-2004: Uniform provisions concerning the approval of vehicles with regard to the installation of lighting and light-signalling devices
GOST R 41.4-99: Uniform provisions for the approval of devices for the illumination of rear registration plates of motor vehicles (except motor cycles) and their trailers
GOST R 41.51-2004: Uniform provisions concerning the approval of motor vehicles having at least four wheels with regard to their noise emissions
GOST R 41.65-99: Uniform provisions concerning the approval of special warning lamps for motor vehicles
GOST R 41.6-99: Uniform provisions concerning the approval of direction indicators for motor vehicles and their trailers
GOST R 41.7-99: Uniform provisions concerning the approval of front and rear position (side) lamps, stop-lamps and end-outline marker lamps for motor vehicles (except motor cycles) and their trailers
GOST R 41.87-99: Uniform provisions concerning the approval of daytime running lamps for power-driven vehicles
GOST R 41.91-99: Uniform provisions concerning the approval of side-marker lamps for motor vehicles and their trailers
GOST R 41.93-99: Uniform provisions concerning the approval of : I. Front underrun protective devices (FUPDs); II. Vehicles with regard to the installation of an FUPD of an approved type; III. Vehicles with regard to their front underrun protection (FUP)
GOST R 41.94-99: Uniform provisions concerning the approval of vehicles with regard to the protection of the occupants in the event of a frontal collision
GOST R 41.95-99: Uniform provisions concerning the approval of vehicles with regard to the protection of the occupants in the event of a lateral collision
GOST R 50574-2002: Automobiles, buses and motorcycles of emergency services. Colours diagrams, identification symbols, inscriptions, special light and sound signals. General requirements
GOST R 50588-93: Foaming agents for fire extinguishing. General technical requirements and test methods
GOST R 50866-96: Motor vehicles. Heating systems. Ventilation systems. Air-condition systems. Methods for determination of efficiency and safety
GOST R 50992-96: Safety of vehicles undergone the influence of low temperatures. General technical requirements
GOST R 50993-96: Motor vehicles. Heating, ventilation and air conditioning systems. Requirements for efficiency and safety
GOST R 51206-2004: Motor vehicles. Content of pollutants in the air of passenger compartment and cabin. Norms and test methods
GOST R 51206-98: Automobile vehicles. Content of harmful substances in air of cabin and saloon. Rates and methods of determination
GOST R 51266-99: Automobile transport facilities. Visibility from the driver's seat. Technical requirements. Test methods
GOST R 51616-2000: Motor vehicles. Internal noise. Permissible levels and methods of tests
GOST R 51709-2001: Motor vehicles and their trailers. Safety requirements for technical conditions and methods of inspection
GOST R 52033-2003: Motor vehicles with petrol engines. Emission of the exhaust gas pollutants. Norms and methods of the control for estimation of technical condition
GOST R 52230-2004: Electrical equipment for vehicles and tractors. General specifications
GOST R 8.571-98: State system for ensuring the uniformity of measurements. Standard platinum resistance thermometers of the first and second grades. Methods of calibration
PB 10-115-96: Regulations of design and safe operation of pressure vessels
RD 34.03.603: Requirements of Use and Testing of Protection Means Used in Electrical Installations and Technical Requirements on Them
The Document is Referenced By:
Decision 219: The list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of the technical regulations of the Customs Union "On the safety of wheeled vehicles". (TR CU 018/2011), and a list of international and regional (interstate) standards, and in their absence - national (state) standards containing the rules and methods of research (tests) and measurements, including sampling rules necessary for the application and implementation of the requirements of technical regulations of the Customs Union "On the safety of wheeled vehicles" (TR CU 018/2011) (TR CU 018/2011) and conformity assessment of objects of technical regulation
Decision 88: About the Program for the development (amendment, revision) of interstate standards, the application of which on a voluntary basis ensures compliance with the technical regulations of the Customs Union
GOST R 53328-2009: Fire fighting technics. Fire extinguishing trucks. General technical requirements. Test methods
Order 1573: The list of national standards and sets of rules, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
Order 832: The list of documents in the field of standardization, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.